Tempus Intersects More Bonanza Grades in Elizabeth Drill-Holes 11, 12, and 13

September 22, 2022 at 13:05 PM EDT

PERTH, AUSTRALIA / ACCESSWIRE / September 22, 2022 / Tempus Resources Ltd ("Tempus" or "the Company") (ASX:TMR)(TSXV:TMRR)(OTC:TMRFF) is pleased to announce assay results for drill-holes EZ-22-11, EZ-22-12, and EZ-22-13 completed at the Elizabeth Gold Project. All seven holes reported today targeted the extension of the Blue Vein gold mineralisation.

HIGHLIGHTS

Assay results have been received for drill holes EZ-22-11, EZ-22-12 and EZ-22-13 targeting the Blue Vein at the Elizabeth Gold Project - all three drill-holes intersected wide zones of quartz veining with gold mineralisation
Drill-hole EZ-22-11 intersected multiple layered zones of quartz veining over approximately 96 metres from 102.50 metres to 193.82 metres that included a "Bonanza" grade intersection of:
- 11.75g/t gold over 2.30 metres from 102.45 metres including
  - 85.20g/t gold over 0.30 meter from 103.15 meters
The results in EZ-22-11 extend the interpreted high and ‘bonanza' grade strike length for Blue Vein by 80 metres to approximately 180 metres, comparing very favourably to the strike extent of the high-grade chutes on Southwest Vein of approximately 80 metres combined, which contained almost 70% of the historical mineral resource for Elizabeth
EZ-22-12 intersected multiple zones of quartz veining with anomalous gold mineralisation over approximately 75 metres from 137.0 metres with more notable intersections that included 1.26 g/t gold over 1.68 metres from 137.65 metres
EZ-22-13 intersected multiple zones of quartz veining with a combination of anomalous and high-grade gold mineralisation throughout
- 1.62g/t gold over 0.25 metres from 108.50 metres, and
- 1.03g/t gold over 0.27 metres from 111.00 metres, and
- 15.30g/t gold over 0.11 metres from 112.34 meters, and
- 1.49g/t gold over 0.18 metres from 196.42 metres, and
- 1.95g/t gold over 0.17 metres from 215.83 metres
Based on the outstanding results received to date, Tempus has extended the 2022 drilling program and now expects to complete up to 40 drill-holes for approximately 2,000 extra metres (vs. 30-hole program originally announced in May)

Tempus Resources, President and CEO, Jason Bahnsen, commented "Today we announce results for three more drill holes from the Blue Vein. Each of the holes intersected wide zones of sheared quartz veining with individual high-grade intersections of up to 85g/t gold. The high-grade Blue Vein gold mineralisation zone has now been extended to approximately 180 metres strike length with the overall thickness of the quartz vein structure increasing in apparent thickness as the drilling moves north east."

Drilling to date shows that the Blue Vein is not a single structure. Each of the drill-holes being reported today (EZ-22-11, EZ-22-12, EZ-22-13) successfully hit Blue Vein gold mineralisation in multiple sub parallel closely spaced intersections continuing to demonstrate the potential for multiple stacked high-grade gold vein mineralisation within a wider Blue Vein structure.

The Blue Vein was discovered in late-2021 (EZ-21-12 including 1.0m at 33.7g/t gold), with assay results now received for 13 holes in 2022 plus 7 holes in 2021 for a total of 20 drill-holes intersecting the Blue Vein to date (including seven holes with ‘bonanza' grade intersections, i.e., greater than 1oz per tonne), high-grade gold mineralisation has now been defined over a strike length of over 200 metres and a vertical distance of up to 15 metres, with a high and ‘bonanza' grade chute interpreted over the first 180 metres of that strike length. The 2022 drilling program has been upsized and continues to test the Blue Vein structure over a total strike length of approximately 400 metres.

Table 1 -Elizabeth Blue Vein EZ-22-11 to EZ-22-13 Significant Intersections

Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)*	Gold Grade	Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)*	Gold Grade	Vein
EZ-22-11	102.45	193.42	91.37	77.67	0.31	Blue Vein
including	102.45	104.75	2.30	1.96	11.75	Blue Vein
including	103.15	103.45	0.30	0.26	85.20	Blue Vein

EZ-22-12	137.65	139.33	1.68	1.43	1.26	Blue Vein
including	138.80	139.33	0.53	0.45	2.08	Blue Vein

EZ-22-13	108.52	108.77	0.25	0.21	1.62	Blue Vein
and	111.00	111.27	0.27	0.23	1.03	Blue Vein
and	112.34	112.45	0.11	0.09	15.30	Blue Vein
and	196.42	196.60	0.18	0.15	1.49	Blue Vein
and	215.83	216.00	0.17	0.14	1.95	Blue Vein

*true thickness is estimated using a multiplier of 0.85.
**The Company considers anything over 0.2 g/t gold as significant.

As of the date of this news release, Tempus has completed 30 drill holes for a total of 7,260 metres at the Elizabeth Project so far during the 2022 field season. Tempus is planning to continue drilling until the end of October, targeting an additional 10 drill holes (approximately 2,000 metres) to be completed this season. The drilling data from this season and the 2021 drill season (28 drill holes) will contribute to a new Mineral Resource estimate, which depending on the timing of assay receipts is expected to be complete around Q1 2023.

Figure 1 - Elizabeth plan view showing 2022 drill-hole locations

Tempus Resources Ltd, Thursday, September 22, 2022, Press release picture

Figure 2 - Elizabeth Blue Vein long section (looking northwest)

This announcement has been authorised by the Board of Directors of Tempus Resources Limited.

Competent Persons Statement

Information in this report relating to Exploration Results is based on information reviewed by Mr. Sonny Bernales, who is a Member of the Engineers and Geoscientists British Columbia (EGBC), which is a recognised Professional Organisation (RPO), and an employee of Tempus Resources. Mr. Bernales has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined by the 2012 Edition of the Australasian Code for reporting of Exploration Results, Mineral Resources and Ore Reserves, and as a Qualified Person for the purposes of NI43-101. Mr. Bernales consents to the inclusion of the data in the form and context in which it appears.

For further information:

TEMPUS RESOURCES LTD
Melanie Ross - Director/Company Secretary Phone: +61 8 6188 8181

About Tempus Resources Ltd

Tempus Resources Ltd ("Tempus") is a growth orientated gold exploration company listed on ASX ("TMR") and TSX.V ("TMRR") and OTCQB ("TMRFF") stock exchanges. Tempus is actively exploring projects located in Canada and Ecuador. The flagship project for Tempus is the Blackdome-Elizabeth Project, a high grade gold past producing project located in Southern British Columbia. Tempus is currently midway through a drill program at Blackdome-Elizabeth that will form the basis of an updated NI43-101/JORC resource estimate. The second key group of projects for Tempus are the Rio Zarza and Valle del Tigre projects located in south east Ecuador. The Rio Zarza project is located adjacent to Lundin Gold's Fruta del Norte project. The Valle del Tigre project is currently subject to a sampling program to develop anomalies identified through geophysical work.

Forward-Looking Information and Statements

This press release contains certain "forward-looking information" within the meaning of applicable Canadian securities legislation. Such forward-looking information and forward-looking statements are not representative of historical facts or information or current condition, but instead represent only the Company's beliefs regarding future events, plans or objectives, many of which, by their nature, are inherently uncertain and outside of Tempus's control. Generally, such forward-looking information or forward-looking statements can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or may contain statements that certain actions, events or results "may", "could", "would", "might" or "will be taken", "will continue", "will occur" or "will be achieved". The forward-looking information and forward-looking statements contained herein may include, but are not limited to, the ability of Tempus to successfully achieve business objectives, and expectations for other economic, business, and/or competitive factors. Forward-looking statements and information are subject to various known and unknown risks and uncertainties, many of which are beyond the ability of Tempus to control or predict, that may cause Tempus' actual results, performance or achievements to be materially different from those expressed or implied thereby, and are developed based on assumptions about such risks, uncertainties and other factors set out herein and the other risks and uncertainties disclosed under the heading "Risk and Uncertainties" in the Company's Management's Discussion & Analysis for the quarter and nine months ended March 31, 2022 dated May 16, 2022 filed on SEDAR. Should one or more of these risks, uncertainties or other factors materialize, or should assumptions underlying the forward-looking information or statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although Tempus believes that the assumptions and factors used in preparing, and the expectations contained in, the forward-looking information and statements are reasonable, undue reliance should not be placed on such information and statements, and no assurance or guarantee can be given that such forward-looking information and statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information and statements.

The forward-looking information and forward-looking statements contained in this press release are made as of the date of this press release, and Tempus does not undertake to update any forward-looking information and/or forward-looking statements that are contained or referenced herein, except in accordance with applicable securities laws. All subsequent written and oral forward-looking information and statements attributable to Tempus or persons acting on its behalf are expressly qualified in its entirety by this notice.

Neither the ASX Exchange, the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Appendix 1

Table 1:Drill Hole Collar Table

		UTM	UTM
Hole ID	Target	Easting (NAD83	Northing (NAD83	Elevation (m)	Length (m)	Azimuth	Dip
		Z10)	Z10)
EZ-21-01	SW Vein	531203	5653771	2400	105	121	-52
EZ-21-02	SW Vein	531203	5653771	2400	132	146	-55
EZ-21-03	SW Vein	531203	5653771	2400	111	158	-47
EZ-21-04	SW Vein	531203	5653771	2400	135	168	-58
EZ-21-05	SW Vein	531078	5653776	2400	561	123	-48
EZ-21-06	SW Vein	531078	5653776	2400	255	110	-55
EZ-21-07	SW Vein	531203	5653771	2400	126	115	-75
EZ-21-07b	SW Vein	531203	5653771	2400	186	115	-75
EZ-21-08	SW Vein	531195	5653839	2427	231	115	-68
EZ-21-09	SW Vein	531200	5654020	2330	360	120	-48
EZ-21-10	SW Vein	530953	5653772	2390	354	127	-50
EZ-21-11	SW Vein	530953	5653772	2390	381	136	-50
EZ-21-12	SW Vein	530953	5653772	2390	375	125	-45
EZ-21-13	SW Vein	530919	5653596	2300	261	94	-45
EZ-21-14	SW Vein	530919	5653596	2300	261	108	-55
EZ-21-15	SW Vein	530919	5653596	2300	330	100	-55
EZ-21-16	SW Vein	530919	5653596	2300	330	83	-48.5
EZ-21-17	SW Vein	530919	5653596	2300	414	98	-63
EZ-21-18	SW Vein	530919	5653596	2300	351	128.5	-63
EZ-21-19	SW Vein	530953	5653772	2390	417	129	-58
EZ-21-20	SW Vein	530849	5653432	2260	300	129	-45
EZ-21-21	East Veins	531695	5653463	2120	357	90	-45
EZ-21-22	SW Vein	531195	5653839	2427	188	75	-45
EZ-21-23	SW Vein	531695	5653463	2120	165	91	-45
EZ-21-24	Blue Vein	530953	5653772	2390	219	84	-54
EZ-21-25	Blue Vein	530953	5653772	2390	201	105	-58
EZ-21-26	Blue Vein	530953	5653772	2390	198	95	-45
EZ-21-27	Blue Vein	530953	5653772	2390	195	150	-60
EZ-21-28	No.9 Vein	530953	5653772	2390	321	300	-55

Table 1: Drill Hole Collar Table

		UTM	UTM
Hole ID	Target	Easting (NAD83	Northing (NAD83	Elevation (m)	Length (m)	Azimuth (^o)	Dip (^o)
		Z10)	Z10)
EZ-22-01	Blue Vein	530953	5653772	2400	222	130	-65
EZ-22-02	Blue Vein	531203	5653772	2400	225	108	-65
EZ-22-03	Blue Vein	531203	5653772	2400	198	95	-50
EZ-22-04	Blue Vein	531200	5653774	2393	375	290	-55
EZ-22-05	Blue Vein	531130	5653775	2399	156	280	-45
EZ-22-06	Blue Vein	531130	5653775	2399	237	290	-55
EZ-22-07	Blue Vein	531130	5653775	2399	216	298	-45
EZ-22-08	Blue Vein	531039	5653887	2422	201	135	-50
EZ-22-09	Blue and SW Vein	530953.1	5653772	2392	468	100	-53
EZ-22-10	Blue Vein	530953.1	5653772	2392	210	95	-65
EZ-22-11	Blue Vein	531039	5653887	2422	207	110	-60
EZ-22-12	Blue Vein	531039	5653887	2422	216	85	-50
EZ-22-13	Blue Vein	531039	5653887	2422	251	123	-65
EZ-22-14	Blue Vein	531004	5653896	2428	249	140	-65
EZ-22-15	Blue Vein	531004	5653896	2428	156	130	-65
EZ-22-16	Blue Vein	531004	5653896	2428	242	120	-65
EZ-22-17	Blue Vein	531004	5653896	2428	251	160	-65
EZ-22-18	Blue Vein	531004	5653896	2428	258	150	-65
EZ-22-19	No.9 Vein	531041	5653893	2422	201	284	-63
EZ-22-20	No.9 Vein	531041	5653893	2422	270	284	-67
EZ-22-21	No.9 Vein	531041	5653893	2422	216	294	-63
EZ-22-22	No.9 Vein	531041	5653893	2422	183	274	-63
EZ-22-23	No.9 Vein	531041	5653893	2422	201	264	-63
EZ-22-24	Main & West Vein	531347	5653777	2378	405	100	-45
EZ-22-25	No.9 Vein	531039	5653888	2422	181	254	-63
EZ-22-26	No.9 Vein	531039	5653888	2422	201	244	-63
EZ-22-27	No.9 Vein	531038	5653891	2422	201	308	-63
EZ-22-28	No.9 Vein	531038	5653891	2422	234	318	-63
EZ-22-29	SW Vein	531136	5653860	2422	246	111	-48
EZ-22-30	SW Vein	531136	5653860	2422	83	111	-55

Table 2: Significant Interval Table

Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
EZ-21-01	94.00	96.60	2.60	2.21	4.60	5.12	SW Vein
and	83.50	84.00	0.50	0.43	20.50	pending	SW Vein
EZ-21-02	102.40	109.00	6.60	5.61	8.40	pending	SW Vein
including	105.40	106.50	1.10	0.93	46.30	pending	SW Vein
EZ-21-03	88.60	95.00	6.40	5.44	7.22	pending	SW Vein
including	89.30	91.90	2.60	2.21	11.80	pending	SW Vein
and	90.00	91.30	1.30	1.11	19.80	pending	SW Vein
and	34.70	35.20	0.50	0.43	3.15	pending	SW Vein
EZ-21-04	122.00	126.00	4.00	3.40	31.20	34.40	SW Vein
including	123.00	124.50	1.50	1.28	52.10	68.30	SW Vein
including	124.00	124.50	0.50	0.43	72.00	87.30	SW Vein
EZ-21-05	134.00	135.00	1.00	0.85	1.38	Not Preformed	7 Vein
	217.55	218.25	0.70	0.59	1.74	1.67	SW Vein
and	256.00	256.50	0.50	0.43	1.03	0.89	SW Vein
and	554.85	555.35	0.50	0.43	0.24	Not Preformed	West Vein
EZ-21-06	134.50	136.00	1.50	1.28	1.10	1.71	7 Vein
and	245.00	246.00	1.00	0.85	2.05	2.45	SW Vein
EZ-21-07	Hole lost
EZ-21-07B	40.10	41.10	1.00	0.85	4.88	Not Preformed	7 Vein
and	51.50	52.20	0.70	0.60	9.06	Not Preformed	7 Vein
and	160.00	165.75	5.75	4.89	0.53	0.70	SW Vein
EZ-21-08	196.25	202.40	6.15	5.23	0.65	0.66	SW Vein
and	226.60	227.10	0.50	0.43	1.54	1.85	SW Vein
EZ-21-09	58.60	59.10	0.50	0.43	0.31	Not Preformed	Blue Vein
and	270.90	272.90	2.00	1.70	2.56	Not Preformed	SW Vein
and	355.88	357.00	1.12	0.95	0.85	Not Preformed	SW Vein
EZ-21-10	223.00	223.50	0.50	0.43	4.04	Not Preformed	7 Vein
and	347.70	349.20	1.50	1.28	0.22	0.21	SW Vein
EZ-21-11	326.90	327.40	0.50	0.43	0.55	0.44	SW Vein
EZ-21-12	117.80	118.80	1.00	0.85	47.6	33.7	Blue Vein
and	130.70	131.20	0.50	0.43	26.4	Not Preformed	Blue Vein
and	163.90	164.40	0.50	0.43	5.50	8.41	Blue Vein
and	344.90	347.00	2.10	1.79	0.78	1.22	SW Vein
EZ-21-13	230.70	232.60	1.90	1.62	0.76	0.71	SW Vein
EZ-21-14	224.00	224.90	0.90	0.77	1.63	1.15	SW Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
EZ-21-15	318.40	320.80	2.40	2.04	0.31	Not Preformed	SW Vein
including	320.30	320.80	0.50	0.43	1.14	Not Preformed	SW Vein
EZ-21-16	305.00	306.90	1.90	1.61	0.55	Not Preformed	SW Vein
EZ-21-17	171.00	171.50	0.50	0.43	0.14	0.57	SW Vein
and	204.00	204.60	0.60	0.51	0.53	Not Preformed	SW Vein
and	254.60	256.85	2.25	1.91	1.40	1.58	7 Vein
and	350.13	350.75	0.62	0.53	1.01	Not Preformed	SW Vein
and	379.47	382.00	2.53	2.15	0.63	0.64	SW Vein
EZ-21-18	299.50	299.90	0.40	0.34	1.53	Not Preformed	SW Vein
EZ-21-19	127.50	128.00	0.50	0.43	4.52	Not Preformed	Blue Vein
and	129.00	130.50	1.50	1.28	4.25	Not Preformed	Blue Vein
and	167.80	168.70	0.90	0.76	4.50	6.14	Blue Vein
and	351.80	354.90	3.10	2.63	0.34	Not Preformed	SW Vein
EZ-21-20	NSI**
EZ-21-21	184.00	186.00	2.00	1.70	1.03	Not Preformed	unknown
and	263.45	264.30	0.85	0.72	1.34	Not Preformed	unknown
EZ-21-22	175.55	176.70	1.15	0.98	1.60	2.50	SW Vein
EZ-21-23	145.00	149.10	4.10	3.48	1.11	1.83	SW Vein
including	147.50	148.20	0.70	0.59	1.08	4.98	SW Vein
EZ-21-24	139.80	141.00	1.20	1.02	0.58	0.58	Blue Vein
and	181.70	182.65	0.95	0.81	0.85	0.84	Blue Vein
EZ-21-25	111.00	113.70	2.70	2.30	13.4	Not Preformed	Blue Vein
including	111.50	112.00	0.50	0.43	71.3	Not Preformed	Blue Vein
EZ-21-26	121.45	122.70	1.25	1.06	9.13	Not Preformed	Blue Vein
including	121.45	121.70	0.25	0.21	45.1	Not Preformed	Blue Vein
and	159.06	160.25	1.19	1.01	1.35	1.45	Blue Vein
EZ-21-27	152.20	153.60	1.40	1.19	12.1	14.31	Blue Vein
including	152.20	153.20	1.00	0.85	16.3	19.19	Blue Vein
and	157.00	157.40	0.40	0.34	1.27	1.28	Blue Vein
EZ-21-28	245.60	246.85	1.25	1.06	0.67	Not Preformed	No.9 Vein

Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
EZ-22-01	123.90	124.70	0.80	0.68	2.07	2.07	Blue Vein
and	125.90	126.00	0.10	0.08	3.82	3.82	Blue Vein
and	161.42	161.82	0.40	0.34	2.25	2.25	Blue Vein
EZ-22-02	147.65	147.83	0.18	0.15	6.88	6.88	Blue Vein
and	185.25	185.85	0.60	0.51	1.89	1.89	Blue Vein
EZ-22-03	96.91	97.33	0.42	0.36	2.05	523.00	Blue Vein
and	124.02	124.47	0.45	0.38	32.66	Not Preformed	Blue Vein
including	124.02	124.13	0.11	0.09	130.00	133.00	Blue Vein
and	164.41	166.14	1.73	1.47	7.41	Not Preformed	Blue Vein
including	165.41	166.14	0.73	0.62	17.40	Not Preformed	Blue Vein
EZ-22-04	353.8	354	0.2	0.17	1.25	Not Preformed	Blue Vein
EZ-22-05	44.5	45.2	0.7	0.595	11.20	Not Preformed	Blue Vein
and	56.8	57	0.2	0.17	1.38	Not Preformed	Blue Vein
and	84.65	85.55	0.9	0.765	1.33	Not Preformed	Blue Vein
and	98	99	1	0.85	2.62	Not Preformed	Blue Vein
EZ-22-06	40.2	40.9	0.7	0.595	1.91	Not Preformed	Blue Vein
and	47.8	48.15	0.35	0.2975	1.17	Not Preformed	Blue Vein
and	153.35	155	1.65	1.4025	1.71	Not Preformed	Blue Vein
Including	154.15	155	0.85	0.7225	2.79	Not Preformed	Blue Vein
EZ-22-07	164.6	164.92	0.32	0.272	1.45	Not Preformed	Blue Vein
and	165.66	165.79	0.13	0.1105	7.30	Not Preformed	Blue Vein
and	170.17	170.4	0.23	0.1955	48.60	Not Preformed	Blue Vein
EZ-22-08	120.6	121	0.4	0.34	0.494	Not Preformed	Blue Vein
EZ-22-09	105.12	106.17	1.05	0.89	322.54	310.72	Blue Vein
including	105.12	105.32	0.20	0.17	1,654	1,572	Blue Vein
	105.32	106.17	0.85	0.72	9.25	13.95	Blue Vein
and	161.13	162.00	0.87	0.74	2.68	Not Preformed	Blue Vein
and	356.19	358.38	2.19	1.86	0.41	Not Preformed	SW Vein
Including	356.19	356.70	0.51	0.43	1.05	Not Preformed	SW Vein
EZ-22-10	193.1	194.75	1.65	1.40	0.61	Not Preformed	Blue Vein
Including	193.98	194.23	0.25	0.21	0.997	Not Preformed	Blue Vein
EZ-22-11	102.45	193.42	91.37	77.67	0.31	Not Preformed	Blue Vein
including	102.45	104.75	2.30	1.96	11.75	Not Preformed	Blue Vein
including	103.15	103.45	0.30	0.26	85.20	Not Preformed	Blue Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
Hole ID	From (m)	To (m)	Interval (m)	True Thickness (m)	Gold Grade	MET Screen Grade	Vein
EZ-22-12	137.65	139.33	1.68	1.43	1.26	Not Preformed	Blue Vein
including	138.80	139.33	0.53	0.45	2.08	Not Preformed	Blue Vein
EZ-22-13	108.52	108.77	0.25	0.21	1.62	Not Preformed	Blue Vein
and	111.00	111.27	0.27	0.23	1.03	Not Preformed	Blue Vein
and	112.34	112.45	0.11	0.09	15.30	Not Preformed	Blue Vein
and	196.42	196.60	0.18	0.15	1.49	Not Preformed	Blue Vein
and	215.83	216.00	0.17	0.14	1.95	Not Preformed	Blue Vein

*true thickness is estimated using a multiplier of 0.85. The Company considers anything over 0.2 g/t gold as significant. **no significant intervals

Appendix 2: The following tables are provided to ensure compliance with the JORC Code (2012) requirements for the reporting of Exploration Results for the Elizabeth - Blackdome Gold Project

Section 1: Sampling Techniques and Data

(Criteria in this section apply to all succeeding sections.)

Criteria	JORC Code explanation	Commentary
Sampling techniques	Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gammasondes, or handheld XRF instruments, etc).These examples should not be taken as limiting the broad meaningof sampling. Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systemsused. Aspects of the determination of mineralisation that are Materialto the Public Report. In cases where "industry standard" work has been done this would be relatively simple (eg ‘reverse circulation drilling was used to obtain1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.	HQ (63.5 mm) sized diamond core using standard equipment. Mineralised and potentially mineralised zones, comprising veins, breccias, and alteration zones were sampled. Samples were half core. Typical core samples are 1m in length. Core samplessent to the lab will be crushedand pulverized to 85% passing75 microns. A 50g pulp will be fire assayedfor gold and multi-element ICP.Samples over 10 g/t gold will be reanalysed by fire assay with gravimetric finish
Drilling techniques	Drill type (eg core, reversecirculation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method,etc).	Diamond Drilling from surface (HQ size)
Drill sample recovery	Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	Detailed calculation of recovery was recorded, with most holes achieving over 95% No relationship has yet been noted between recovery and grade and no sample bias was noted to have occurred.

Criteria	JORC Code explanation	Commentary
Logging	Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. The total length and percentage of the relevant intersections logged.	Detailed geological and geotechnical logging was completed for each hole. All core has been photographed. Complete holes were logged.
Sub- sampling techniques and samplepreparation	If core,whether cut or sawn and whether quarter, half or all core taken. If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub- sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled.	Half core was sampled, using a core saw. Duplicate samplesof new and historical core are Quarter core or half core where not previously sampled Sample sizes are considered appropriate for the grain size of the material being sampled. It is expected that bulk sampling will be utilised as the project advances, to more accurately determine grade.
Quality of assay data and laboratory tests	The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partialor total. For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. Nature of quality control procedures adopted (eg standards, blanks,duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.	Core samples that have been sent to the lab for analysis include control samples (standards, blanks and prep duplicates) inserted at a minimum rate of 1:5 samples. In addition to the minimum rate of inserted control samples, a standard or a blank is inserted following a zone of mineralization or visible gold Further duplicate samples were analysed to assess variability
Verification of sampling and assaying	The verification of significant intersections by either independent or alternative company personnel. The use of twinned holes. Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. Discuss any adjustment to assay data.	Re-assaying of selected intervals of historic core have been sent for analysis.

Criteria	JORC Code explanation	Commentary
Location of datapoints	Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. Specification of the grid system used. Quality and adequacy of topographic control.	All sampling points were surveyed using a hand held GPS. UTM grid NAD83Zone 10. A more accurate survey pickup will be completed at the end of the program, to ensure data is appropriate for geological modelling and Resource Estimation. Down hole surveys have been completed on all holes.
Data spacing and distribution	Data spacing for reporting of Exploration Results. Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserveestimation procedure(s) and classifications applied. Whether sample compositing has been applied.	Most drilling is targeting verification and extension of known mineralisation. It is expected that the data will be utilised in a preparation of a Mineral Resource statement. Additional drilling is exploration beneath geochemical anomalies, and would require further delineation drilling to be incorporated in a MineralResource.
Orientation of data in relation to geological structure	Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	In general, the aim was to drill perpendicular to the mineralised structures, to gain an estimate of the true thickness of the mineralised structures. At several locations, a series (fan) of holes was drilled to help confirm the orientation of the mineralised structures and to keep land disturbance to a minimum.
Samples Security	The measures taken to ensure sample security.	Samples from Elizabeth were delivered to the laboratory by a commercial transport service.
Audits or Reviews	The results of any auditsor reviews of sampling techniques and data.	An independent geological consultant has recently visited the site as part of preparing an updated NI43-101Technical Report for the Project.

Section 2: Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)

Criteria

JORC Code explanation

Commentary

Mineral tenement and land tenure status

Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, nativetitle interests, historical sites, wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.

The Blackdome-Elizabeth Projectis comprised of 73 contiguous mineral claims underlain by 14 Crown granted mineral claims and two mining leases.
The Property is located in the Clintonand Lillooet MiningDivisions approximately 230 km NNE of Vancouver
Tempus has exercised the option to acquire the Elizabeth Gold Project and has completed an addendum to the original Elizabeth Option Agreement

(refer to ASX announcement 15 December 2020)

A net smelter royalty of 3% NSR (1% purchasable) applies to several claims on the Elizabeth Property.
No royalties apply to the Blackdome Property or Elizabeth Regional Properties.
There are currently no known impediments to developing a project in this area, and all tenure is in good standing.

Exploration done by other parties

Acknowledgment and appraisal of exploration by other parties.

In the 1940s, placer gold was discovered in Fairless Creek west of Blackdome Summit.Prospecting by Lawrence Frenier shortly afterward led to the discovery of gold-bearing quartzveins on the southwest slope of the mountain that resulted in the staking of mining claims in 1947. Empire Valley Gold Mines Ltd and Silver Standard Resources drove two adits and completed basic surfacework during the 1950s.
The Blackdome area was not worked again until 1977 when Barrier Reef Resources Ltd.re-staked the area and performed surface work in addition to underground development. The Blackdome Mining Corp. was formed in 1978 and performed extensive surface and underground work with various joint venture partners that resulted in a positive feasibility study. A 200 ton/daymill, camp facilities and tailings pond were constructed and mining operations officially commenced in 1986.The mine ceased operations in 1991,having produced 225,000oz of Au and 547,000oz of Ag from 338,000tons of ore (Godard et al., 2010)
After a period of inactivity, Claimstaker Resources Ltd.took over the project, reopening the mine in late 1998.

Criteria	JORC Code explanation	Commentary
		Mining operations lasted six months and ended in May of 1999.During this period,6,547 oz of Au and 17,300 oz of Ag were produced from 21,268 tons of ore. Further exploration programs were continued by Claimstaker over the following years and a Japanese joint venture partner was brought onboard that prompted a name change to J-Pacific Gold Inc. This partnership was terminated by 2010, resulting in another name change to Sona Resources Corp. Gold-bearing quartz veins were discovered near Blue Creek in 1934, and in 1940-1941 the Elizabeth No. 1-4 claims were staked. Bralorne Mines Ltd. optioned the property in 1941 and during the period 1948-1949, explored the presently- named Main and West Veins by about 700 metres of cross-cutting and drifting, as well as about 110 metres of raises. After acquiring the Elizabeth Gold Project in 2002, J- Pacific (now Sona) has conducted a series of exploration programs that included diamond drilling 66 holes totalling 8962.8 metres (up until 2009) Other exploration work by Sona at the Elizabeth Gold Project has included two soil grid, stream sediment sampling, geological mapping and sampling, underground rehabilitation, structural mapping and airborne photography and topographic base map generation.
Geology	Deposit type,geological setting and style of mineralisation.	The Blackdome property is situated in a region underlain by rocks of Triassicto Tertiary age. Sedimentary and igneous rocks of the Triassic Pavilion Group occurring along the FraserRiver represent the oldest rocks in the region. A large, Triassic age, ultramafic complex (Shulaps Complex) was emplaced along the Yalakom fault; a regional scale structure located some 30 kilometres south of the property. Sediments and volcanics of the Cretaceous Jackass Mountain Groupand Spences Bridge/Kingsvale Formations overlie the Triassic assemblages. Some of these rocks occur several kilometres south of Blackdome. Overlying the Cretaceous rocks are volcanics and minor sediments of Eocene age.These rocks underlie much of Blackdome and are correlated with the Kamloops Group seen in the Ashcroft and Nicola regions.

Criteria	JORC Code explanation	Commentary
Drill hole Information	A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: easting and northing of the drill hole collar elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar dip and azimuth of the hole down hole length and interception depth hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	Refer to Appendix 1 for drill hole collar information
Data aggregation methods	In reporting Exploration Results, weighting averaging techniques, maximum and/ or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated.	Intervals reported using several samples are calculated using a weighted average. Calculated intervals using a weighted average did not use a top cut on high-grade samples. High-grade samples are reported as 'including' Calculated weighted average intervals are continuous intervals of a mineralized zone and do not include unsampled intervals or unmineralized intervals.
Relationship between mineralisation widths and intercept lengths	These relationships are particularly important in the reporting of Exploration Results. If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').	In general, drilling is designed to intersect the mineralized zone at a normal angle, but this is not always possible. For the reported intervals, true widths are reported where mineralized core was intact and possible to measure the orientation. Otherwise the true width is left blank
Diagrams	Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	Refer to maps within announcement for drill hole locations.

Criteria	JORC Code explanation	Commentary
Balanced reporting	Where comprehensive reporting of all Exploration Resultsis not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	Where broaderlow-grade intervals are reported the high-grade intercepts are reported as 'including' within the reported interval
Other substantive exploration data	Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	Tempus recently completed an airborne magnetic and radiometric survey over the Elizabeth Gold Project (refer to ASX announcement 02 August 2021) by completing 97 lines for a total of 735 line-kilometres. Flight lines are oriented east-west with north-south tie lines and spaced 200 metres across the entire 115km2 Elizabeth property. Line spacing of 100 metres was flown over the Elizabeth Main and Elizabeth East Zones. The airborne magnetic survey data was reviewed and interpreted by Insight Geophysics Inc. using 3D magnetization vector inversion (MVI) modelling. The geophysical surveys identified the Blue Creek Porphyry, which is the known host of the high-grade Elizabeth gold-quartz veins, as a relative magnetic low anomaly within the Shulaps Ultramafic Complex. From this correlation of geology and geophysics it was determined that the Blue Creek Porphyry, originally explored / mapped to approximately 1.1km2 in size, is likely much larger. The airborne magnetic survey and MVI 3D modelling interpret the Blue Creek Porphyry to be at least four-times the size at approximately 4.5km2. This interpretation of the Blue Creek Porphyry is also extensive at depth extending to at least 2km deep
Further work	The natureand scale of planned furtherwork (eg tests for lateral extensions or depth extensions or large- scale step-out drilling). Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	Tempus plans to updatehistorical NI43-101 foreign resource estimates to current NI43-101 and JORC 2012 standards Tempus is also seekingto expand the scale of the mineralisation at the project through further exploration.

SOURCE: Tempus Resources Ltd

View source version on accesswire.com:
https://www.accesswire.com/717090/Tempus-Intersects-More-Bonanza-Grades-in-Elizabeth-Drill-Holes-11-12-and-13

Tempus Intersects More Bonanza Grades in Elizabeth Drill-Holes 11, 12, and 13

Sections

Services

The Ridgway Record

Ridgway, PA (15853)

Today

Tonight

Tempus Intersects More Bonanza Grades in Elizabeth Drill-Holes 11, 12, and 13

Sections

Services

The Ridgway Record