Edgar Filing: SOLTA MEDICAL INC

Form 10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

For fiscal year ended December 31, 2009

Commission File Number: 001-33123

SOLTA MEDICAL, INC.

(Exact name of registrant as specified in its charter)

Delaware

68-0373593

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)

25881 Industrial Boulevard,

Hayward, California 94545

(510) 782-2286

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

Securities registered pursuant to Section 12(b) of the Act:


Title of Each Class		Name of Each Exchange on Which Registered
Common Stock, $0.001 par value per share		The NASDAQ Stock Market, Inc.

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period than the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ¨ No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act (check one):

Large accelerated filer ¨ Accelerated filer ¨ Non-accelerated filer x Smaller reporting company ¨

Indicate by check mark whether registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x

The aggregate market value of the registrant’s common stock, held by non-affiliates of the registrant as of June 30, 2009 (which is the last business day of registrant’s most recently completed second fiscal quarter) based upon the closing price of such stock on the NASDAQ Global Market on that date, was approximately $48.6 million. For purposes of this disclosure, shares of common stock held by entities and individuals who own 5% or more of the outstanding common stock and shares of common stock held by each officer and director have been excluded in that such persons may be deemed to be “affiliates” as that term is defined under the Rules and Regulations of the Securities Exchange Act of 1934. This determination of affiliate status is not necessarily conclusive.

The number of shares of Registrant’s common stock issued and outstanding as of February 26, 2010 was 59,216,300.

DOCUMENTS INCORPORATED BY REFERENCE

Part III incorporates by reference certain information from the registrant’s definitive proxy statement for the 2010 Annual Meeting of Stockholders.

SOLTA MEDICAL, INC.

ANNUAL REPORT ON FORM 10-K

INDEX


		Page
PART I

ITEM 1.	Business	1

ITEM 1A.	Risk Factors	24

ITEM 1B.	Unresolved Staff Comments	41

ITEM 2.	Properties	41

ITEM 3.	Legal Proceedings	41

ITEM 4.	Removed and Reserved	42

PART II

ITEM 5.	Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities	43

ITEM 6.	Selected Financial Data	45

ITEM 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	47

ITEM 7A.	Quantitative and Qualitative Disclosures About Market Risk	62

ITEM 8.	Financial Statements and Supplementary Data	63

ITEM 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	103

ITEM 9A.	Controls and Procedures	103

ITEM 9B.	Other Information	103

PART III

ITEM 10.	Directors, Executive Officers of the Registrant and Corporate Governance Matters	104

ITEM 11.	Executive Compensation	104

ITEM 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	104

ITEM 13.	Certain Relationships and Related Transactions, and Director Independence	104

ITEM 14.	Principal Accounting Fees and Services	104

PART IV

ITEM 15.	Exhibits and Financial Statement Schedules	105

PART I

Item 1.

Business

Overview

We design, develop, manufacture and market energy-based medical device systems for aesthetic applications. These systems are marketed under the brand names Fraxel^® and Thermage^® and are FDA-cleared for dermatological procedures in the following applications:

•

Skin Tightening. The Thermage NXT™ and CPT™ systems offer non-invasive treatment options for skin tightening and contouring, body shaping, and improvement in the appearance of cellulite.

•

Skin Rejuvenation. The Fraxel re:fine, Fraxel re:store, and Fraxel re:store Dual systems offer treatments for skin conditions such as fine lines and pigmentation. In addition, the Fraxel re:store system offers treatments for acne and surgical scars, deeper lines and wrinkles, and actinic keratoses.

•

Skin Resurfacing. The Fraxel re:pair system is for dermatological procedures requiring ablation, coagulation and resurfacing of soft tissue as well as for rhytides, pigmentation and vascular dyschromia.

Each of our systems consists of one or more hand pieces, a console that incorporates a graphical user interface, an energy source and electronics, and a disposable treatment tip. We market our systems and treatment tips in the United States to physician practices primarily through a direct sales force and internationally in over 100 countries through both a network of distributors and direct sales force. Our customers consist primarily of dermatologists and plastic surgeons and our expanded customer base includes other specialties such as general and family practitioners, gynecologists, ophthalmologists and others. As of December 31, 2009, we had a global installed base of over 5,000 systems.

The Structure of Skin and Connective Tissue

The skin is comprised of the epidermis, dermis and the hypodermis, or subcutaneous fat layer. The top two layers of skin, the epidermis and dermis, together are known as the cutis and on most areas of the body are approximately two to three millimeters thick. The dermis contains blood vessels, hair follicles and other skin components. The deepest layer of the skin, the hypodermis, contains 50% of the body’s fat cells. The hypodermis also contains collagen strands, or fibrous septae, that connect the dermis to the underlying bone and muscle. Collagen has been shown to be a very flexible and stretchable protein with high tensile strength. The following diagram illustrates the basic anatomy of the skin:

LOGO

Electromagnetic radiation, specifically light and heat, applied to the different layers of the skin can have an effect on the skin’s appearance. Many factors, such as advancing age, smoking, and exposure to damaging environmental factors such as the sun, can result in undesirable hair growth, enlargement or swelling of blood vessels, deterioration of collagen that enables formation of wrinkles and sagging tissue, and uneven pigmentation or sun spots. Devices such as aesthetic lasers have been designed to generate light waves to deliver heat through the epidermis, into the dermis, for removal of hair, vein treatment and other aesthetic applications. Gels, coolants and other means are used to protect the epidermis from burning during this process. Delivery of heat below the dermis, into the subcutaneous fat layer, has been accomplished using other forms of energy for aesthetic effect.

The Market for Aesthetic Procedures to Treat the Skin

The American Society for Aesthetic Plastic Surgery reports that in 2009, total expenditures for aesthetic procedures in the U.S. were almost $10.5 billion. From 1997 to 2009 the total number of aesthetic procedures increased from approximately 2.1 million to just under 10 million procedures, representing approximately a 14% compounded annual growth rate. Non-surgical aesthetic procedures were primarily responsible for the overall increase, rising from approximately 1.1 million to approximately 8.5 million procedures over the same period, representing approximately a 19% compounded annual growth rate. We believe there are several factors that have contributed to this historical growth of non-invasive and minimally-invasive aesthetic procedures, including:

•

Aging of the U.S. Population. The “baby boomer” demographic segment, defined by the U.S. Census as those Americans born between 1946 and 1964, represented nearly 30% of the U.S. population in 2006. Baby boomers control approximately $2 trillion in spending power and 50% of all discretionary income. The size and wealth of this aging segment and its desire to retain a youthful appearance have driven the growth for aesthetic procedures.

•

Emergence of Non-Traditional Practitioners. The traditional providers of aesthetic procedures include dermatologists and plastic surgeons. In 2007, there were approximately 17,000 physicians within the specialties of dermatology and plastic surgery according to the American Board of Medical Specialties. Manufacturers of aesthetic systems have placed an increasingly important focus on sales to other physician groups including approximately 72,000 family practitioners, 40,000 obstetricians and gynecologists, and 39,000 general surgeons. Additionally, physician directed medi-spas and non-medical day spas have entered the aesthetics market.

•

Broader Range of and Accessibility to Safe and Effective Treatments. Technological developments have made non-invasive treatment alternatives increasingly safe and effective. These technological developments have also reduced the required treatment and recovery time from invasive surgical procedures, which in turn have led to greater patient demand. These factors, along with the easy-to-use and low-cost nature of these products, have attracted both traditional and non-traditional practitioners to aesthetic procedures.

•

Market Shift Towards Less Invasive Procedures. Market trends confirm that patients are moving away from invasive procedures towards minimally-invasive or non-invasive treatments. Notably, the American Society for Aesthetic Plastic Surgery reports that from 1997 to 2009 the total number of laser skin resurfacing procedures increased from approximately 154,000 to 510,000 procedures, representing a 10% compounded annual growth rate, and the total number of Botox injection procedures increased from 650,000 to 2.5 million injections over the same period, representing a 12% compounded annual growth rate.

•

Changing Practitioner Economics. Managed care and government payor reimbursement restrictions in the United States, and similar payment-related constraints outside the United States,

are motivating practitioners to establish or expand their elective aesthetic practices with procedures that are paid for directly by patients. We expect this trend to continue as physicians look for ways to expand their practices.

•

Increasing Acceptance of Aesthetic Procedures. Mass-market television shows like Extreme Makeover, The Doctors and 10 Years Younger reflect the mainstream acceptance of aesthetic procedures. Additionally, features in many popular television and print media have the effect of widely advertising the aesthetic procedures undertaken by celebrities, enhancing the glamour associated with and demand for self-improving treatments.

Similar market trends also exist outside the United States, where demand for non-invasive and minimally-invasive aesthetic procedures has also experienced strong growth. Manufacturers of these aesthetic devices typically derive one-third to one-half of their revenue from international sales.

Aesthetic Procedures for Skin and Their Limitations

Many medical treatments are available to treat wrinkles, rejuvenate the skin and give a patient a more youthful appearance. The most popular treatments include invasive surgical procedures, minimally-invasive needle injections and a variety of other procedures, many of which are energy-based.

Surgical Procedures

Of the various aesthetic alternatives for reducing wrinkles and rejuvenating appearance, invasive surgical procedures, such as cosmetic eyelid surgery, tummy tucks and facelifts, can create the most pronounced and long-lasting changes in appearance. They are performed by plastic surgeons with the patient under anesthesia. Compared to alternative treatments, however, invasive surgical procedures are expensive, costing thousands of dollars, and can involve weeks of post-surgical recovery and time away from work. They carry risk of infection, adverse reactions to anesthesia and hematoma, or accumulation of blood under the skin that may require removal.

Injections

Popular alternatives for temporarily improving appearance and reducing wrinkles include toxins, such as Botox, and soft tissue fillers, such as Restylane and Juvederm, that are injected into the skin. These injections are typically administered by dermatologists at a cost of several hundred dollars. In most instances, they involve little or no restricted recovery time for the patients. The effects of these procedures are temporary, however, and require repeat treatment, with Botox lasting from three to four months and injectable fillers typically lasting from three to six months.

Chemical Peels and Microdermabrasion

Chemical peels use acidic solutions to peel away the epidermis and microdermabrasion generally utilizes small sand crystals to resurface the skin. These techniques can lead to stinging, redness, irritation and scabbing, and more severe complications such as changes in skin color. In addition, patients undergoing these treatments are often required to avoid sun exposure for several months following a procedure.

Laser and Light-based Procedures

Lasers and light based skin rejuvenation procedures typically involve the process of damaging the patient’s skin in a controlled manner in order to induce the skin’s natural wound-healing process. The objective is to stimulate the growth of new skin, resulting in a more youthful appearance.

One approach to skin rejuvenation, referred to as a bulk ablative approach, is to completely remove one or more layers of the skin in the treatment area. This procedure is often limited to patients with light skin and is rarely used off the face. Bulk CO₂ laser treatments are one example of this approach. Bulk CO₂ laser procedures and other bulk ablative procedures can be effective in rejuvenating the skin, however they often expose patients to substantial pain, long healing times and substantial risk of complications. Bulk ablative procedures can cause bleeding and oozing following a treatment, resulting in significant wound care and associated downtime for the patient. Adverse side effects may include infection, scarring and other possible complications such as hypopigmentation, which is a permanent or long-lasting whitening of the skin. Bulk ablative procedures are typically performed by experienced plastic surgeons and dermatologists and the number of these bulk ablative procedures performed annually has declined in recent years.

A second approach to skin rejuvenation is a bulk non-ablative approach which stimulates the skin’s natural wound healing process by mildly damaging collagen in the dermis without breaking or removing one or more layers of the skin. Intense pulsed light treatments are one example of this approach. Intense pulsed light procedures and other bulk non-ablative procedures treat many of the same skin conditions as bulk ablative approaches and are associated with shorter patient downtime and are less invasive. Nevertheless, intense pulsed light and other bulk non-ablative approaches commonly have drawbacks such as:

•

Limited effectiveness. Bulk non-ablative procedures are typically less effective than bulk ablative procedures and many bulk non-ablative procedures are not typically used on areas other than the face or on patients with darker skin colors.

•

Adverse side effects. Possible side effects associated with bulk non-ablative procedures include temporary bruising, localized darkening and scarring of the skin as a result of the indiscriminate bulk nature of the treatment and other factors.

•

Inconsistent results. Bulk non-ablative procedures have a narrow therapeutic window because an appropriate treatment setting that produces results for one patient may have a risk of scarring for another while settings that are consistently safe for all patients often result in minimal or no improvement.

The Solta Medical Solution

We believe that our Fraxel systems provide compelling treatment alternatives for skin rejuvenation and resurfacing and that our Thermage systems fill an unmet need for non-invasive skin tightening, contouring and cellulite reduction treatments. In addition, use of these systems in combination with one another can provide an even more dramatic, synergistic result for patients seeking a more youthful appearance.

Fraxel

A new class of skin rejuvenation therapy, first introduced and commercialized by us, is referred to as “fractional” resurfacing. Fractional resurfacing creates thousands of microscopic treatment zones per square centimeter in the skin to stimulate repair and rejuvenation in the tissue by inducing the skin's natural wound-healing response. At the same time, fractional resurfacing spares a significant portion of the tissue in the treatment area, and stimulates the spared tissue around each microscopic treatment zone to rejuvenate and resurface the skin. We believe fractional resurfacing overcomes the safety shortfalls associated with bulk ablative procedures and the efficacy and safety limitations associated with bulk non-ablative approaches by fundamentally changing the method of treatment.

We believe our Fraxel laser systems afford a new class of skin rejuvenation therapy that provides patients with effective, consistent results without significant downtime and risk of complications. We currently market four Fraxel products: The re:store, re:store Dual, re:fine and re:pair. The Fraxel re:store, Fraxel re:store

Dual and Fraxel re:fine laser platforms non-ablatively treat a range of applications that include wrinkles and fine lines, pigmentation, sun damage, uneven skin texture and melasma. In addition, the Fraxel re:store DUAL system features two lasers, the first application of the 1927 Thulium wavelength in aesthetics and the 1550 nm gold standard laser for non-ablative fractional resurfacing. The Fraxel re:store platform is optimized for treating more severe conditions, such as acne and surgical scars, deeper lines and wrinkles, and actinic keratoses. The Fraxel re:pair laser system, our ablative fractional resurfacing system, treats the above conditions as well as skin laxity and vascular dyschromia. This system has already received the United States Food and Drug Administration (“FDA”) 510(k) clearance for indications requiring ablation, coagulation and resurfacing of soft tissue.

Our Fraxel systems provide a number of benefits for physicians and patients seeking to provide or receive skin rejuvenation and resurfacing treatments:

•

Effective Treatments. Our Fraxel laser systems generate and deliver precise wavelengths of energy that create deep microscopic lesions to target specific skin conditions. Our technology also incorporates precise dosage control, which automatically adjusts the amount, pattern, depth and location of energy delivered into the skin to optimize treatment results and enable consistent results from patient to patient.

•

Ease of Use. The motion control technology within our Fraxel laser systems enables practitioners to deliver Fraxel laser treatments by performing a simple painting motion on the patient’s skin. The motion control technology automatically delivers a consistent level and pattern of energy by compensating for how rapidly the practitioner moves the hand piece, enabling the practitioner to provide a more uniform post-treatment appearance and a reduced treatment time.

•

Broad Applications. We offer Fraxel laser systems that can treat multiple skin conditions on all skin colors, and can be used on all skin surfaces, while other laser technologies are often confined to facial applications. Our Fraxel laser systems have gained FDA 510(k) clearance for the treatment of multiple skin conditions and we are continually evaluating additional opportunities.

•

Enhanced Safety. Technologies contained in our Fraxel laser systems improve the safety profiles of our systems. One example is our Integrated Optical Tracking System which reduces the risk of operator error, including deactivating the laser if it is not in motion on the skin. The fact that our consumable treatment tips can be removed and disinfected further enhances the safety of the Fraxel re:store and Fraxel re:fine laser systems.

•

System Reliability. Our Fraxel re:store and Fraxel re:fine laser systems incorporate advanced fiber laser technology that eliminates the need for optical alignment or adjustments within the laser source. These Fraxel laser systems require minimal regular maintenance and have a reduced total cost of ownership.

Thermage

Our Thermage systems consist of a radiofrequency (“RF”) generator with cooling capability, through the delivery of a coolant to protect the outer layer of the skin from over-heating, and a hand piece that, in conjunction with a treatment tip, regulates epidermis cooling and monitors treatment data. Our system includes a variety of single-use, disposable treatment tips that attach to the hand piece and are selected by physicians based on the procedure to be performed and the size of the area to be treated. The Thermage procedure is typically performed in a medical office setting by, or under the supervision of, trained and qualified physicians, including not only plastic surgeons and dermatologists, but also physicians who do not traditionally perform cosmetic procedures, such as general and family practitioners, obstetricians and gynecologists, and general and vascular surgeons.

Our Thermage systems provide the following benefits for physicians and patients seeking to provide or receive skin tightening, contouring and cellulite reduction treatments:

•

Controlled Heating of Collagen. Collagen is found in the dermis and in fibrous septae strands in the subcutaneous fat layers of the skin. As we age, our skin loses collagen and the collagen that remains stretches, creating loose, saggy skin. Because RF energy delivery depends on tissue resistance and not on optical light absorption, it can penetrate to a much greater depth than conventional lasers down to the subcutaneous fat layer of the skin. Our monopolar RF heating technology has two mechanisms of action that impact collagen, an initial response and a secondary response. The initial response is an immediate collagen contraction, a dermal contraction for tightening and a fibrous septae contraction in the subcutaneous fat layer for contouring. A secondary wound healing response results in collagen deposition and remodeling, resulting in a continual tightening improvement over time. Our own clinical experience demonstrates, and published independent, along with affiliated, scientific data corroborates, the Thermage procedure’s tissue-tightening effect. This body of data provides potential physician customers with objective evidence that they can evaluate when considering a purchase of our system.

•

Non-Invasive, Non-Ablative Alternative to Surgery. The Thermage procedure is non-invasive, involving no surgery or injections, and offers an alternative to surgery at a lower price with little or no downtime from patients’ normal routines. It is also a non-ablative procedure that causes minimal temporary surface tissue damage. If desired, the Thermage procedure can be used in a complementary fashion in conjunction with invasive therapies such as liposuction, facelift and thread implants, as well as injectable fillers and other minimally-invasive and non-invasive aesthetic procedures.

•

Single Procedure Treatment. The Thermage procedure is normally performed in a medical office setting as a single treatment that takes from 20 minutes to an hour and a half, depending on the treatment area. Studies have shown clinical effect from a Thermage procedure that is both immediate and that can improve over a measurement period of six months following treatment. In addition, Thermage procedures have been used effectively on all skin types and tones and on various areas of the body.

•

Compelling Physician Economics. We believe physicians are compensated more per hour by performing Thermage treatments than other non-invasive aesthetic device treatments. The Thermage system currently requires relatively lower capital costs than competing laser and RF systems, while average procedure fees for Thermage treatments generally exceed our competitors. We continue to design new treatment tips to address new applications.

•

Ease of Use. The Thermage NXT™ and CPT™ systems incorporate a straightforward user interface that allows a trained physician to easily perform procedures across various parts of the body. Different treatment sites may use different tips, each of which is pre-customized by size, pulse counts, pulse durations and heating profile to the intended procedure. The system provides real-time feedback and can be adjusted during the procedure as needed. The hand pieces are designed with a small profile for accurate placement during treatment, comfort and ease of use.

•

Comfort Pulse Technology. The Thermage CPT™ system leverages proprietary Comfort Pulse Technology™ to greatly improve patient comfort during treatment. This proprietary technology combines vibration and a unique energy delivery mechanism to improve the overall patient treatment experience while maintaining the same tightening and firming results that physicians and patients have come to expect from Thermage treatments.

Solta Medical’s Products

The following table provides information regarding Solta Medical’s products:

Thermage

NXT ⁽¹⁾

Thermage
CPT

Fraxel
re:store ⁽²⁾

Fraxel
re:store
DUAL

Fraxel
re:fine

Fraxel
re:pair

Commercial Launch Date:

January

2007

August

2009

September
2006

September
2009

June

2007

November
2007

Modality:

Non-ablative

Ablative

Energy Source:

Monopolar

Radio-frequency

Monopolar

Radio-
frequency

Erbium
Glass

Fiber Laser

Erbium
Glass and
Thulium
Glass

Fiber Laser

Raman-
shifted

Fiber Laser

CO₂ Laser

Wavelength:

N/A

1550 nm

1550 nm and
1927 nm

1410 nm

10600 nm

Indications:

Cellulite Reduction

Eyelid Wrinkles

Periorbital Wrinkles

Melasma

Resurfacing

Pigmentation

Surgical/Acne Scars

Actinic Keratoses

Wrinkles and Rhytides

Vascular Dyschromia

Typical Patient Treatments:

1-4

3-4

5-6

1-2

Consumable Treatment Tip:

Yes

Approximate Tip Life:

One treatment

(face/body part)

One treatment

(face/body part)

3-5 full face
treatments

5-6 full face
treatments

1-2 full face
treatments

Treatment Length:

20 – 90

minutes

20 – 90

minutes

20 – 30

minutes

20 – 30

minutes

20 – 30

minutes

20 – 30

minutes

(1)	System updated from previous system launched in 2002

(2)	System updated from previous system launched in 2004

Fraxel re:store DUAL System

Launched in September 2009, the Fraxel re:store Dual system provides superior results for large body areas during a single treatment. Prior to the non-ablative Fraxel re:store Dual system, laser skin resurfacing procedures were largely limited to the face. The Fraxel re:store Dual takes the fractional laser technology to the next level by adding a 1927 nm wavelength, the first application of a thulium laser in the aesthetics market, optimized for dermatological procedures requiring coagulation of soft tissue. The Fraxel re:store Dual provides a superior treatment for pigment to IPL (Intense Pulsed Light) devices, a much better safety profile than ablative fractional laser devices, and all the benefits of the 1550 nm Fraxel re:store system included, with a 25% faster treatment speed and cooling built into the hand piece. We believe this new wavelength provides a breakthrough, effective solution for superficial skin conditions with less discomfort.

Fraxel re:store System

Our Fraxel re:store system was launched in September 2006 as an improved next generation product to our first system launched in September 2004 and offers a fractional non-ablative treatment utilizing a fiber laser. We believe the Fraxel re:store system provides an effective solution for skin conditions such as wrinkles, acne scars, skin texture and tone, and pigmentation, including melasma. This system can be operated at a wide range of treatment levels offering the clinician the versatility to treat both superficial and deep conditions based on the patient’s needs and preferences. Our targeted customer base for the Fraxel re:store and re:store Dual systems are physicians who have experience with aesthetic lasers or otherwise have practices performing various aesthetic treatments.

Fraxel re:fine System

Our Fraxel re:fine system, which we launched in June 2007, offers a fractional non-ablative treatment utilizing a fiber laser. The Fraxel re:fine system provides an effective, low discomfort treatment solution in a compact design. The Fraxel re:fine system is for physician practices that want to provide treatment for skin tone and texture, pigmentation and fine lines rather than the broader range of conditions treated by the Fraxel re:store system. Our target customer for the Fraxel re:fine system is a physician practice that is expanding into aesthetics or has a younger patient base primarily interested in preventative or lighter treatments.

Fraxel re:pair System

Our Fraxel re:pair system offers a fractional ablative treatment utilizing a CO2 laser. We believe our Fraxel re:pair system produces similar effectiveness to traditional bulk ablative treatments, with less downtime and risks. The system also penetrates deeper into the skin than bulk ablative treatments, which may provide additional skin tightening. The Fraxel re:pair system delivers a new type of treatment we call fractional deep dermal ablation, for FDDA treatment. The Fraxel re:pair system has received FDA 510(k) clearance for dermatological procedures requiring ablation, coagulation and resurfacing of soft tissue. Our targeted customer base for the Fraxel re:pair system is physician practices that have significant experience in working with aesthetic lasers and are seeking effective but safer ablative procedures with less downtime than those currently offered in the market.

Fraxel Treatment Tips

Our Fraxel laser systems use proprietary consumable treatment tips. To perform a treatment, the physician attaches to the hand piece a treatment tip, which is designed to ensure the treatment is delivered consistently, safely and effectively. After approximately three to five treatments with the Fraxel re:store and re:store Dual laser systems, approximately five to six treatments with the Fraxel re:fine laser system and every treatment with the Fraxel re:pair laser system, the consumable tip is depleted of its useful life and must be replaced.

Components of Fraxel Laser Systems

Our Fraxel laser systems are comprised of a laser system and a delivery system, including the control console and hand piece. These components generate the laser energy, create individual fractional laser beams and deliver the treatment to the patient according to our optimized treatment parameters.

•

Fraxel re:store, Fraxel re:store Dual and Fraxel re:fine lasers. Our Fraxel re:store, Fraxel re:store Dual and Fraxel re:fine system consoles each contain a fiber laser which generates laser pulses at 1550 nm, 1550 nm and 1927 nm, and 1410 nm wavelengths, respectively. These wavelengths were specifically chosen to target water in the skin and to optimize the treatment results of each system. The fiber laser technology is specifically designed to produce a high quality beam of energy that maintains its wavelength accuracy to within a few nanometers. The fiber laser is also highly efficient, with low power requirements that can be provided by a standard wall outlet, and without the need for water cooling. Furthermore, the fiber laser is durable and robust with a long life span, and it is easy to set up and maintain, with no service requirement or need for optical alignments or adjustments.

•

Fraxel re:pair lasers. Our Fraxel re:pair laser system utilizes an air-cooled CO₂laser at 10600 nm. The specific water absorption characteristics of this wavelength in the skin enable the laser to ablate the tissue immediately, creating a needle-like crater and thin zones of coagulation into the dermis. The treatment is made up of deep microscopic ablated zones surrounded by undamaged tissue, rather than a thin, general ablation of the entire surface as typically achieved with traditional CO₂ lasers. By utilizing this fractional deep dermal ablation treatment, we believe treatments with the CO₂ laser can be optimized for safety and shorter patient downtime.

•

Control Console and Graphical User Interface. Our Fraxel laser systems feature a touch screen graphical user interface that allows the practitioner to select the energy level, treatment level and number of passes. In addition, each system has a dosage feedback system that enables the physician to accurately monitor the total energy delivered to the treatment area by utilizing measurement information obtained from our Intelligent Optical Tracking System. The console also features a simulation mode for training and patient demonstration.

•

Hand piece. The laser energy is delivered to our Fraxel laser hand pieces, which incorporate our high speed scanner and our Intelligent Optical Tracking System. An additional feature in the Fraxel re:store and Fraxel re:fine hand pieces is an automated spot size control system. This system delivers optimum lesion penetration at each energy setting and minimizes bulk heating and discomfort. The Fraxel re:store Dual now features integrated cooling through a Zimmer chiller designed into the system. This allows for a single operator to perform the treatment.

•

Treatment Tips. Our Fraxel laser systems use consumable treatment tips that attach to the hand piece. Due to the amount of laser energy absorbed by these tips over the course of treatments, they degrade and require replacement. We offer large and small tip solutions enabling the physician to treat all areas of the body effectively. Both the Fraxel re:fine and Fraxel re:store tips are designed to accommodate high level disinfection, and the necessary disinfection trays and instructions are provided during installation and training. The Fraxel re:pair tips are designed to support evacuation of tissue debris from the treatment field and are intended to eliminate any risk of biohazard, due to the ablative nature of the treatment. Each treatment tip contains a proprietary internal EPROM, or programmable memory chip, which stores treatment parameters and safety limits in order to optimize performance and safety in the selected treatment.

Thermage NXT and CPT Systems

Our Thermage NXT and CPT system use our patented method of delivering monopolar RF energy for heating collagen.

•

Monopolar Radiofrequency. Monopolar RF delivery uses two electrodes, with one active electrode being held in the device hand piece by the physician and the second, a passive return electrode, typically attached to the patient’s back. Monopolar delivery allows for precise administration of energy because the electrical current is concentrated where the active electrode touches the body and disperses quickly as it travels towards the return electrode. The monopolar RF process is distinct from bipolar RF-based technology, which is superficial in depth, relying on current passing through tissue located between two probes placed close together on the surface of the skin. We believe that monopolar technology delivers energy effectively to a greater tissue depth than bipolar technology.

•

The Treatment Tip Capacitive Coupling Mechanism of Action for Collagen Heating. The single-use treatment tip device contains our patented technology that uses monopolar RF energy as a controlled tissue heating source through the use of a non-conducting material, known as a dielectric. Capacitive coupling is the use of the dielectric to create an electric field in the area where our treatment tip touches the body. The electric field induces a current within the surrounding tissue, resulting in volumetric heating of the tissue due to the tissue’s natural resistance to electrical current flow. The heating depth is based upon the size and geometry of the treatment tip and can be controlled from a few hundred microns to several millimeters in depth, depending upon the particular treatment tip selected for various treatment areas. Collagen is a more efficient conductor of electricity than fat tissue and therefore acts as a pathway for the electric current. To achieve this deep heating with simultaneous surface cooling, the surface of the treatment tip transmits RF energy to the skin while serving as a dynamic contact cooling membrane for the cryogen spray. The contact membrane continually monitors skin surface temperature to help protect the epidermis.

•

Comfort and Safety. Since the initial launch of our original Thermage system in 2002, we have monitored and revised our procedure guidelines to safely and effectively deliver RF energy and cryogen cooling to the treatment site with minimal discomfort to the patient. An energy-based aesthetic treatment, if not used according to the manufacturer’s protocol, has the potential to cause patient discomfort, irritation or surface tissue burning. We have designed our system to minimize the risk of these types of occurrences through stringent built-in safety precautions in addition to extensive user training. Our system regulates a combination of inputs to precisely and uniformly distribute RF energy over the treatment site, including temperature and pressure sensors at each corner of the treatment tip and pre-programmed power levels and times for specific treatments.

Thermage NXT and CPT System Components

Our Thermage NXT and CPT systems include three major components: the RF generator, the reusable hand piece and a single-use treatment tip, as well as several consumable accessories. Physicians attach a single-use treatment tip to the hand piece, which is connected to the RF generator. The RF generator authenticates the treatment tip device and programs the system for the desired treatment without physician intervention.

•

Radiofrequency Generator. The RF generator produces a six-megahertz signal and is simple and efficient to operate. Controls are within easy reach, and important user information is clearly displayed on the built-in display, including energy delivered, tissue impedance, duration and feedback on procedure technique. Cooling is achieved through the delivery of a coolant that cools and helps to protect the epidermal surface during a Thermage procedure.

•

Hand piece. The reusable hand piece holds the treatment tip in place for the treatment and processes information about skin temperature and contact, treatment force against the skin, cooling system function and other important data. A precision control valve within the hand piece meters the delivery of the coolant. In addition, the CPT hand piece has the ability to vibrate the treatment tip at 3 levels to provide greater comfort forth patient.

•

Single-use Treatment Tips. The treatment tip device is available in four sizes with several configurations of pulse counts, pulse durations and three heating profiles for efficient implementation of treatment guidelines, based on the size and nature of the treatment area. Physicians currently can order sterile treatment tips in sizes of 0.25 cm², 1.5 cm², 3.0 cm²and 16.0 cm²on the NXT platform and tips in sizes of 0.25 cm², 3.0 cm² and 16.0 cm² on the CPT platform. The CPT tips provide more uniform heating through a tip frame that has been added to the surface of the electrode. Each treatment tip contains a proprietary internal EPROM, or programmable memory chip, which stores treatment parameters and safety limits in order to optimize performance and safety in the selected treatment. To enhance procedural safety, we have also programmed the EPROM for single-use treatments. Using the same treatment tip to perform multiple treatments could result in injury, as a result of the eventual breakdown of the treatment tip’s electrode dielectric membrane. Therefore, the EPROM ensures that the treatment tip is not reused following a particular procedure.

Our NXT and CPT systems also include other consumable components in addition to treatment tips. The systems house a canister of coolant that can be used for an average of three to six procedures, depending on the total skin surface area treated and the treatment tip used. Each patient procedure also requires a return pad, which is typically adhered to the patient’s lower back to allow a path of travel for the RF current through the body and back to the generator. We also sell proprietary coupling fluid, an electrically conductive viscous liquid that helps ensure electrical and thermal contact with the treatment tip.

Business Strategy

Our goal is to become a leading provider of energy-based medical devices for aesthetic applications by:

•

Broadening our Physician Customer Base. We intend to continue penetrating the traditional aesthetic practitioner specialties, which include dermatologists and plastic surgeons. We are also seeking to increase our penetration in non-core physician specialties and physician-directed medi-spas with track records of safe and successful aesthetic treatments. Additionally, we continue to devote substantial resources to increasing our market penetration and strengthening our physician relationships in international markets.

•

Optimizing Customer Base through Cross-selling. When we merged the two companies together (Reliant and Thermage) we saw a strong cross selling opportunity between the two portfolios as our installed bases had only a 10% overlap. Our sales force was able to take advantage of this opportunity during 2009.

•

Driving Treatment Tip Usage. Unlike most traditional energy-based medical device businesses, which rely solely on the sale of new capital equipment to generate revenue, our disposable treatment tip business model enables us to maintain a continuous relationship with our customer base. We work collaboratively with our customer base to increase treatment tip usage by expanding clinical applications and augmenting and facilitating the marketing efforts of our physician customers. We believe that our customers’ interests are closely aligned with our own, and we monitor the market to foster continued procedure growth for our customers and treatment tip sales for us. With marketing programs such as the Diamond Rewards Program and our international Partner Plan, our sales force works with physician customers to help develop profitable Thermage and Fraxel businesses within their practice.

•

Developing New and Improving Current Applications. Our current product portfolio allows us to offer products that meet a broad range of physician and patient needs. By continuing to invest in research and development, we intend to expand our product offerings even further by improving our current products and commercializing products that address new clinical treatment applications.

•

Seeking Growth Opportunities via Complementary Products, Technologies or Businesses. We intend to continue pursuing opportunities to expand our core business by identifying opportunities to further complement our existing array of products for the aesthetics market with synergistic technologies and/or applications.

•

Expanding our International Presence. We believe the size of the international market is comparable to the U.S. market, and we are focused on increasing our market penetration overseas and building global brand-recognition. We intend to add sales representatives and support staff to increase direct sales and strengthen physician relationships in international markets.

Sales and Marketing

We sell our Thermage and Fraxel systems to physicians in the United States primarily through a direct sales force of trained sales consultants. As of December 31, 2009, we had a U.S. direct sales force team, including area sales directors, area sales representatives and clinical specialists, managed by the Vice President of Sales. Our U.S. sales organization is divided into two groups, with half of the sales force focusing on existing customers to sell treatment tips, upgrades, accessory sales and training, and the remainder focusing on securing and broadening our new customer base. Outside of the United States, we primarily sell our Thermage and Fraxel systems to physicians in over 100 countries through independent distributors. In select countries such as Australia, Hong Kong, Germany, Canada and the United Kingdom, we also have direct sales organizations.

United States Sales

Our strategy to increase sales in the United States is to:

•

remove obstacles for purchase, including treatment discomfort, time of treatment, efficacy and cost, and increase the variety of applications we offer;

•

continue to position the Thermage and Fraxel procedures as attractive alternatives to other aesthetic treatments for skin tightening, skin rejuvenation, skin resurfacing and body shaping;

•

work closely with our physician customers to increase product usage and enhance the marketing of Thermage and Fraxel procedures in their practices;

•

invest in consumer public relations; and

•

expand our sales efforts to reach physicians outside of the traditional specialties for aesthetic procedures.

Further, we actively engage in promotional opportunities through participation in industry tradeshows, clinical workshops and company-sponsored conferences with expert panelists, as well as through trade journals, brochures and our website. We actively seek opportunities to obtain positive media exposure, and have been highlighted on such national broadcasts as Oprah, Good Morning America, Rachel Ray, The Today Show and E! Live from the Red Carpet, as well as numerous local news programs.

•

Consultative Sales Process. Through our consultative sales process, we form strong relationships with our customers through frequent interactions. Beyond performing initial system installation

and on-site training and certification, which can occur within two weeks of a physician’s purchase decision, our sales consultants provide consultation to physicians on how to integrate our systems into their practices and market procedures to their patients. Our sales consultants’ compensation structure emphasizes consumable sales and customer service over capital equipment sales, although our sales force also has incentives to generate new accounts through system sales. We require our sales consultants to invest substantial time in training and servicing our physician customers, and therefore we discourage sales to physicians who do not show the potential to drive aesthetic procedure volume.

•

Physician Training and Certification. We provide comprehensive training and education to each physician upon delivery of the Thermage and Fraxel systems. We require this initial training to assist physicians in safely and effectively performing these procedures. The majority of physicians operating our installed base of systems have pursued and met the training criteria that we establish. To signify their achievement, we award a certificate of training to these physicians and identify them within the physician locator on our website. We do not list physicians within our physician locator unless they have met these training requirements.

•

Diamond Rewards Program. This is an industry-exclusive customer loyalty program available to Solta Medical customers in the United States. The program allows physicians to lock-in preferred pricing for Thermage and Fraxel treatment tips along with other preferred customer benefits to help physicians grow their practices and increase practice profitability.

•

Direct-to-Consumer Marketing (“DTC”). We have historically invested in consumer programs designed to build brand awareness and recognition, demonstrate our commitment to supporting our physician customers and distributors and increase demand for Thermage and Fraxel procedures. At the end of 2008 new consumer websites for both Thermage and Fraxel were launched. These sites are targeted to consumers interested in learning more about Thermage and Fraxel treatments and include information on our underlying technology and potential treatment outcomes, as well as short films and listings of local physicians who offer Thermage and Fraxel procedures. We have observed our website traffic increase significantly following national television appearances and their periodic re-broadcasts and following our DTC efforts. Due to women’s interest in anti-aging treatments and procedures, our current DTC efforts are focused on public relations where we utilize public relations outreach, such as desk-side briefings and pitching of new product press releases, to consumer health and beauty publications. This effort generates millions of gross impressions and has generated a high awareness of the Thermage and Fraxel brands among this key target demographic.

International Sales

As of December 31, 2009, we had an international sales team including regional managing directors, regional sales representatives and clinical specialists managed by the Vice President of Sales. We support our independent distributors who market our Thermage and Fraxel systems in over 100 countries. We require our distributors to provide customer training, to invest in equipment and marketing, and to attend certain exhibitions and industry meetings. The percentage of our revenue from customers located outside the United States was approximately 54%, 48%, 48% in December 31, 2009, 2008 and 2007, respectively.

Our strategy to grow sales outside the United States is to:

•

increase penetration of Thermage and Fraxel systems in international markets in which our systems are currently sold;

•

increase utilization of our systems through increased treatment tips and consumable sales;

•

sell direct into select international markets; and

•

expand our marketing efforts to support direct sales into select international markets.

Competition

Our industry is subject to intense competition. We compete directly against laser and light-based skin rejuvenation products and procedures offered by companies such as Alma Laser, Cutera, Cynosure, Lumenis, Lutronic, Palomar Medical Technologies, Sciton and Syneron Medical. In addition, we compete against existing and emerging treatment alternatives such as cosmetic surgery, chemical peels, microdermabrasion, Botox, dermal fillers and collagen injections. Some of these alternative procedures require a lower initial capital investment by a practitioner, and some of these procedures may not require the purchase of a consumable treatment tip to perform a procedure. Some of our competitors are also publicly-traded companies and others have longer operating histories than we do. Many of them may enjoy several competitive advantages, including:

•

greater name recognition;

•

more extensive intellectual property protection;

•

established relationships with practitioners and other health care professionals;

•

established domestic and international distribution networks;

•

broader product lines and existing treatment systems, and the ability to offer rebates or bundle products to offer higher discounts or incentives;

•

greater experience in conducting research and development, manufacturing, clinical trials, obtaining regulatory approval for products and marketing approved products; and

•

greater financial resources for product development, sales and marketing and patent litigation.

Competition among providers of laser and other light-based devices for the aesthetic market is characterized by intensive sales and marketing activities. There are few barriers to entry that would prevent new entrants or existing competitors from developing products that could compete with ours. There are many companies, both public and private, that are developing devices that use light-based, radiofrequency-based and alternative technologies. Additional competitors may enter the market and we are likely to compete with new companies in the future. To compete effectively, we have to spend significantly on sales and marketing activities and differentiate our products on the basis of performance, brand name, reputation and price. We have encountered and expect to continue to encounter potential customers who, due to existing relationships with our competitors, are committed to, or prefer the products offered by these competitors.

Research and Development

The focus of our research and development team is to provide technological innovation and associated intellectual property that expands the value proposition of our Thermage and Fraxel brand technology and product platforms. We work closely with medical thought leaders and physician entrepreneurs to understand unmet needs and emerging applications in aesthetic medicine. We continually improve the utility of existing products as well as develop new technology platforms for emerging aesthetic applications. At Solta Medical, we strengthen and accelerate the development process by engaging our fully-staffed, co-located aesthetic clinic and our on-site biomedical laboratory in technological innovation. This collaboration promotes the rapid conversion of concepts into products that are well differentiated, meet our recurring revenue business model, work and bring

high praise from our customers. Our primary ongoing investments are in skin tightening, non-ablative and minimally ablative skin resurfacing, body shaping and contouring. We are committed to a secured, recurring revenue business model and our research and development team is guided by this commitment to fuel a balanced, long-term sales growth product portfolio with both disposable/consumable and capital equipment products. Current research and development activities address both the professional and consumer markets and are focused on:

•

Developing new laser wavelengths, laser delivery systems and new treatment indications;

•

Improving the efficacy and predictability of monopolar RF treatment and developing new energy delivery technologies for the future;

•

Developing algorithms, technology and devices for on-board skin diagnostics, precision dosage control and patient comfort management; and

•

Improving and developing state of the art security systems to ensure the safety and efficacy of our systems. These security systems also maintain integrity of our long-term recurring revenue in the form of tips, hand pieces and other consumables.

As of December 31, 2009, we had a staff of 53 technical professionals focused on product development projects and the clinical, biomedical and regulatory support of these projects. We use off-site animal testing facilities and our fully equipped, on-site biomedical lab for the early development and evaluation of product concepts and for providing support to scientific and clinical studies conducted by our co-located clinic and by off-site investigators and institutions. We use transmission electron microscopy on biopsied tissue samples to corroborate that our products induce the denaturing of collagen that leads to immediate tissue tightening. We have developed histology techniques to investigate the depth of heat in tissue and the wound healing process that we believe is responsible for long-term improvement and tightening of tissue. Our staff of laser tissue interaction specialists has amassed over 50,000 histological images in the quantification of treatment parameters. We have also created three-dimensional computer models to study tissue treatment with our products. In addition, we have also formed strategic relationships with outside contractors for assistance on specialized projects, and we work closely with experts in the medical community to supplement our internal research and development resources. Research and development expenses for 2009, 2008 and 2007 were $16.2 million, $9.5 million and $9.1 million, respectively. The advanced research and development team includes physicists and biomedical systems engineers who create the prototype devices that enable the biomedical engineering team to explore the skin science. The biomedical engineering team is led by RF and laser tissue interaction specialists who model the laser tissue interactions, and create the databases that are utilized for the design of treatment systems. The product engineering team consists of experienced program managers, optical engineers, mechanical engineers, electrical engineers and embedded machine control software engineers who have the responsibility for design of ergonomic, reliable products, for documentation of those products, release to manufacturing and long-term design support.

Products for the Consumer Market

A significant portion of our research and development resources are directed towards development of technology for the consumer market. We entered into an agreement with Philips Consumer Lifestyle B.V. (“Philips”) in March 2008 to develop and commercialize a home-use, laser-based device for skin rejuvenation. We believe this represents a significant opportunity to bring laser-based devices directly to consumers. Under the agreement, Philips is currently making quarterly payments to us for research and development related to the device. Under the terms of this arrangement, Philips will make advance quarterly payments for the costs incurred in performing activities under the arrangement. Approximately $3 million of payments remained as of December 31, 2009, to be received by us over the next 3 quarters, or as agreed upon. Philips may terminate the agreement at any time if it chooses not to proceed with commercialization of the device. Upon commercialization of the device, Philips will pay us a percentage of net sales of the device and related products. As long as certain

technology transfer payments are paid to us, the agreement is exclusive with respect to the right of Philips to manufacture, distribute, sell and commercialize the device and the related products. After termination of the agreement and/or termination of the exclusivity period as described above, we are prohibited from directly or indirectly manufacturing, selling, distributing and commercializing any laser-based devices for home-use by consumers that are similar to the device developed under this agreement. This program, by its nature, is generating component and system level cost reduction opportunities for our future professional products, as well.

Patents and Proprietary Technology

Our patent applications may not result in issued patents, and we cannot assure you that any patents that issue will protect our intellectual property rights. Third parties may challenge any patents issued to us as invalid, may independently develop similar or competing technology or may design around any of our patents. We cannot be certain that the steps we have taken will prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights in these foreign countries as fully as in the United States.

As a result of a settlement of litigation reached in June 2005, we and Syneron have granted each other a non-exclusive paid-up license under the patents asserted in the lawsuit and related patents under the parties’ control. We excluded from this license any rights to utilize monopolar RF technologies and capacitive electrical coupling, which we believe in combination allow the Thermage procedure to create a reverse thermal gradient and deep, near uniform, volumetric heating to achieve tissue tightening effects. Syneron excluded from its license any patents related to its proprietary Electro-Optical Synergy technology. Both parties admitted the validity of all patents in the litigation, but neither admitted any wrongdoing or liability.

We advised Alma Lasers Ltd. and Alma Lasers, Inc (together “Alma”) as early as February 2006 that Alma’s Accent product infringed numerous Thermage patents. On April 26, 2007 Alma filed a lawsuit against us in the United States District Court for the District of Delaware requesting a declaratory judgment that Alma’s Accent product does not infringe our patents and that our patents are invalid. We believe that we have meritorious defenses in this action and intend to defend the action vigorously.

On June 20, 2007, we filed patent infringement counterclaims against Alma in the United States District Court for the District of Delaware asserting that that Alma’s Accent^XL and Harmony systems infringe ten of our U.S. patents. The counterclaims were amended on December 10, 2007 to include a claim of infringement of an eleventh patent. In addition to damages and attorney fees, we are asking the Court to enjoin Alma from further infringement. During May, June and July 2008, Alma filed with the United States Patent and Trademark Office requests that all of the 11 patents asserted by us be reexamined. The United States Patent and Trademark Office has made rejections of some claims in each of these 11 patents. We believe the United States Patent and Trademark Office will reaffirm the validity of our patents. We do not believe the final disposition of these matters will have a material adverse effect on our financial statements and future cash flows.

Through the acquisition of Reliant Technologies, Inc. (“Reliant”) in December 2008, we have an exclusive, royalty bearing, worldwide license, with the right to sub-license, with Massachusetts General Hospital

to a patent application relating to some of the technology used in the Fraxel laser systems. Under the agreement, we made a payment to Massachusetts General Hospital upon achievement of a described milestone, and we pay royalties on sales of Fraxel laser systems and consumable tips. Massachusetts General Hospital has the right to control the prosecution of the patent application subject to this license and the enforcement of any patent that may issue, subject to our right to enforce it should Massachusetts General Hospital elect not to do so. The license agreement with Massachusetts General Hospital will remain in effect until the later of (a) the date on which all issued patents and filed patent applications within the patent application subject to the agreement have expired or been abandoned, and (b) one year after the last commercial sale for which a royalty is due under the agreement, unless the agreement is terminated earlier in accordance with its terms.

On November 10, 2008, we entered into agreements with Palomar Medical Technologies and Massachusetts General Hospital to create the Fractional Technology Open Patent Program (“FTOPP”). The FTOPP was designed to provide third parties the opportunity to license technology related to fractional light-based treatments in the professional field. Subject to certain conditions, we agreed to license patents that are included in the FTOPP on a non-discriminatory basis to such third parties. The FTOPP agreements require that the royalties from FTOPP licensees be allocated amongst the three parties.

The FTOPP comprises six patent families, including 11 issued and pending U.S. patents and applications, along with foreign counterparts. Included in the FTOPP are: U.S. patent numbers 6,632,219 and 6,059,820 and patent application number 11/250,139 (the “Tankovich-Baranov” patent family named for inventors Dr. Nikolai Tankovich and Dr. Eugene Baranov); U.S. patent application number 10/542,390 (the “1678” patent family licensed by us from Massachusetts General Hospital); and U.S. patent application number 10/367,582 (the “582” patent family). Included in the FTOPP from Palomar Medical Technologies are: U.S. patent number 6,997,923 and patent application number 11/235,697 (the “923” patent family); and U.S. patent number 6,723,090 and patent application number 11/408,272 (the “Fiber Laser” patent family). Also included in the FTOPP from Massachusetts General Hospital is U.S. patent number 7,331,953 and patent application number 11/931,232 (the “953” patent family).

In conjunction with the FTOPP, we and Palomar Medical Technologies entered into a cross-license agreement by which we have licensed certain patents to each other and have granted covenants not to sue with respect to each other’s existing products and technologies.

In addition, we have notified certain competitors of our belief that they may be infringing or may need a license under one or more of our issued patents. These notices may result in other patent litigation in the future. Patent litigation is very expensive and could divert management’s attention from our core business. Patent litigation could also result in our patents being held invalid or narrowly construed. We have in the past and may in the future offer certain of our intellectual property rights for license to our competitors. As of December 31, 2009, we have not entered into any such licenses with our competitors other than our licenses with Syneron and Palomar. We granted Edward Knowlton, one of our founders and inventor of our original patents, an exclusive license under the original Thermage patents and related patents for certain non-cosmetic applications. We also granted Relay Technologies, Inc. an exclusive license under the Reliant intellectual property for certain non-cosmetic applications, as part of the merger transaction between Reliant and us.

Solta Medical has several registered trademarks and service marks. “Thermage,” “ThermaCool,” “NXT,”, “Reliant,” and “Fraxel,” are registered trademarks in the United States and several foreign countries. As of December 31, 2009, we have 392 pending and registered trademark filings worldwide, some of which apply to multiple countries, providing coverage in 60 countries. We intend to file for additional trademarks to strengthen our trademark rights, but we cannot be certain that our trademark applications will issue or that our trademarks will be enforceable.

All employees and technical consultants are required to execute confidentiality agreements in connection with their employment and consulting relationships with us. We also require them to agree to disclose and assign to us all inventions conceived or made in connection with the employment or consulting relationship.

We cannot provide any assurance that employees and consultants will abide by the confidentiality or invention assignment terms of their agreements. Despite measures taken to protect our intellectual property, unauthorized parties may copy aspects of our products or obtain and use information that we regard as proprietary.

Clinical Research

We are co-located with an aesthetic clinic managed by an independent plastic surgeon medical director. The aesthetic clinic is funded and administratively managed by the Company. The staff of the clinic performs Thermage and Fraxel procedures, participates in clinical studies and assists in research into new therapies using our systems. These studies provide us with immediate feedback on treatment parameters and treatment protocols which enable us to develop and improve the safety and efficacy of our aesthetic treatment systems. The clinic also conducts on-site clinical studies in support of obtaining additional regulatory clearances, applications development and photographic documentation. The clinic also offers us a hands-on observation and training center for potential physician and nurse customers or for those interested in advanced training in treatment protocols and system parameters to achieve optimal outcomes.

Manufacturing

Our manufacturing strategy involves the combined utilization of our internal manufacturing resources and expertise, approved suppliers and contract manufacturers. Our internal manufacturing activities include the assembly, testing and packaging of Thermage and Fraxel branded treatment tips and hand pieces, as well as the final integration, system testing and packaging of Thermage and Fraxel systems. We outsource the manufacture of components, subassemblies and certain finished products that are produced to our specifications and shipped to our facility for final assembly or inspection, testing and certification. Finished product is stored at and distributed primarily from our Hayward facility. Quality control, risk management, efficiency and the ability to respond quickly to changing requirements are the primary goals of our manufacturing operations.

We have arrangements with our suppliers that allow us to adjust the delivery quantities of components, subassemblies and finished products, as well as delivery schedules, to match our changing requirements. The forecasts we use are based on historical trends, current utilization patterns and sales forecasts of future demand. Lead times for components, subassemblies and finished products may vary significantly depending on the size of the order, specific supplier requirements and current market demand for the components and subassemblies. Most of our suppliers have no contractual obligations to supply us with, and we are not contractually obligated to purchase from them, the components used in our devices.

We obtain programmable memory chips for our treatment tips and the coolant valve for our hand piece and systems from single suppliers, for which we attempt to mitigate risks through inventory management and purchase order commitments. Other products and components come from single suppliers, but alternate suppliers have been qualified or, we believe, can be readily identified and qualified. In addition, the availability of cryogen for our cooling module, which we can source from multiple suppliers, may fluctuate due to changes in the global supply of this material. To date, we have not experienced material delays in obtaining any of our components, subassemblies or finished products, nor has the ready supply of finished product to our customers been adversely affected.

We are required to manufacture our products in compliance with the FDA’s Quality System Regulation, or QSR. The QSR covers the methods and documentation of the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products. We maintain quality assurance and quality management certifications to enable us to market our products in the member states of the European Union, the European Free Trade Association and countries which have entered into Mutual Recognition Agreements with the European Union. These certifications include EN ISO 9001:2000 and CAN/CSA ISO 13485:2003 and are also required to maintain our product registration in a number of other foreign markets such as Canada.

We use small quantities of common cleaning products in our manufacturing operations, which are lawfully disposed of through a normal waste management program. We do not forecast any material costs due to compliance with environmental laws or regulations.

Services and Support

We strive to provide highly responsive service and support for both our Thermage and Fraxel systems and our treatment tip and consumable products.

Our treatment tips and consumables are shipped from finished goods inventory typically on the day of the order. All treatment tips are identified with lot numbers and date codes that indicate the expiration date of the product and are fully warranted until the date of expiration. We maintain a staff of customer service personnel in our Hayward, California facility that is available by phone to our customers to answer questions regarding the use of our products. In addition, in the United States our direct sales force provides on-site support and training to our customers in the use of Thermage and Fraxel systems.

In the United States, our systems and accessory products are shipped to a customer’s site for initial installation and training by one of our direct sales consultants. Our direct sales force, our customer service personnel and our product service staff provide post-installation support and service. In the event of a failure of a system, our customer service department arranges in most cases for the immediate shipment of “loaner” equipment to the customer for its use during the time that the equipment is being repaired. Our goal is to minimize the disruption caused by a service event, and our customers typically receive loaner equipment within two days after notifying us of a problem. In addition, we arrange for the customer’s equipment to be returned to our Hayward facility where we confirm and diagnose the problem. Any necessary repairs are performed either at our facility or, in the case of the first generation Thermage system, at a contract manufacturer’s facility. All systems and components are serialized or lot tracked, and device history records are maintained that track service history and configuration. In markets outside of the United States, our products are serviced and supported through our independent distributors or, in our directly supported international markets, by our field service personnel and/or third party service providers.

Government Regulation

Our Thermage and Fraxel systems are medical devices and are subject to extensive and rigorous regulation by the U.S. Food and Drug Administration (“FDA”), as well as other federal and state regulatory bodies in the United States and laws and regulations of foreign authorities in other countries. FDA regulations govern the following activities that we perform, or that are performed on our behalf, to ensure that medical products distributed domestically or exported internationally are safe and effective for their intended uses:

•

product design and development;

•

product testing;

•

product manufacturing;

•

product safety;

•

product labeling;

•

product storage;

•

recordkeeping;

•

premarket clearance or approval;

•

advertising and promotion;

•

production; and

•

product sales and distribution.

FDA’s Premarket Clearance and Approval Requirements

Unless an exemption applies, each medical device we wish to commercially distribute in the United States will require either prior 510(k) clearance or premarket approval from the FDA. The FDA classifies medical devices into one of three classes. Devices deemed to pose lower risks are placed in either class I or II, which requires the manufacturer to submit to the FDA a premarket notification requesting clearance to commercially distribute the device. This process is generally known as 510(k) clearance. Some low risk devices are exempted from this requirement. Devices deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices, or devices deemed not substantially equivalent to a previously cleared 510(k) device, are placed in class III, requiring premarket approval. All of our current products are class II devices.

510(k) Clearance Pathway

When a 510(k) clearance is required, we must submit a premarket notification to the FDA demonstrating that our proposed device is substantially equivalent to a previously cleared and legally marketed 510(k) device or a device that was in commercial distribution before May 28, 1976 for which the FDA has not yet called for the submission of premarket approval applications (“PMA”). By regulation, the FDA is required to clear or deny a 510(k) premarket notification within 90 days of submission of the application. As a practical matter, clearance often takes significantly longer. The FDA may require further information, including clinical data, to make a determination regarding substantial equivalence. If the FDA determines that the device, or its intended use, is not substantially equivalent to a previously cleared device or use, the FDA will place the device, or the particular use, into class III, requiring premarket approval.

Radiofrequency devices used for aesthetic procedures, such as wrinkle reduction, are generally regulated as Class II medical devices and are qualified for clearance under 510(k) procedures. We have received 17 510(k) clearances for the Thermage system for multiple indications. We received FDA clearance to market our Thermage system for the treatment of periorbital wrinkles and rhytides in November 2002 and for treatment of facial wrinkles and rhytides in June 2004. In December 2005, we received FDA clearance to market our Thermage system for full body treatment of wrinkles. In October 2006, we received FDA clearance to market the Thermage system, for the temporary improvement in the appearance of cellulite. In June 2007, we received clearance to market our Thermage system for treatment of wrinkles and rhytides for the upper and lower eyelids. In June 2009, we received FDA clearance to market our latest Thermage system and hand piece configuration for wrinkles, rhytides and for the temporary improvement in the appearance of cellulite.

Laser devices used for aesthetic procedures, such as skin resurfacing, are also generally regulated as Class II medical devices, requiring 510(k) clearance. The FDA has granted 11 510(k) clearances for four Fraxel devices relating to multiple indications for use. We received FDA clearance to market our first generation Fraxel SR750 system for coagulation of soft tissue in November 2003 and subsequently for treatment of periorbital wrinkles (June 2004), pigmented lesions (June 2004), melasma (March 2005), skin resurfacing procedures (July 2005) and acne and surgical scars (March 2006). In March 2006, we received FDA clearance to market our Fraxel re:store system for soft tissue coagulation and for treatment of periorbital wrinkles, pigmented lesions, melasma and skin resurfacing. We subsequently received FDA clearance for the Fraxel re:store for treatment of acne and surgical scars in January 2007 and for actinic keratoses in May 2007. In April 2007, we received FDA clearance to market the Fraxel re:fine system for soft tissue coagulation and for treatment of periorbital wrinkles, pigmented lesions, melasma, skin resurfacing, acne scars and surgical scars. The Fraxel re:pair system was cleared for ablation, coagulation and resurfacing of soft tissue in April 2007 and for treatment of wrinkles, pigmentation, textural irregularities and vascular dyschromia in November 2007. We received FDA clearance for

two additional Fraxel re:pair hand pieces in July 2008, which deliver ablative and incisional treatments for surgical applications. . We received FDA clearance for the Fraxel re:store DUAL Laser System in October 2009, which offer the 1550nm and 1927nm wavelengths.

Premarket Approval Pathway

A PMA must be submitted to the FDA if the device cannot be cleared through the 510(k) process. A PMA must be supported by extensive data, including but not limited to, technical, preclinical, clinical, manufacturing and labeling, to demonstrate to the FDA’s satisfaction the safety and effectiveness of the device.

Upon submission, the FDA determines if the PMA application is sufficiently complete to permit a substantive review, and, if so, the application is accepted for filing. The FDA then commences an in-depth review of the PMA application, which typically takes one to three years, but may last longer. An advisory panel of experts from outside the FDA is typically convened to review and evaluate the PMA applications and provide recommendations to the FDA as to the approval of the device. As part of the PMA review, the FDA will typically inspect the manufacturer’s facilities for compliance with Quality System Regulation, or QSR, requirements, which impose specific testing, control, documentation and other quality assurance procedures.

To date, no device that we have developed has required premarket approval, nor do any of the devices currently in development require premarket approval.

Product Modifications

After a device receives 510(k) clearance, any product modification that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance or could require a PMA approval. The FDA requires each manufacturer to make this determination initially, but the FDA can review any decision and disagree with a manufacturer’s determination not to file a new 510(k) or PMA. If the FDA disagrees with our determination, the FDA may retroactively require us to seek 510(k) clearance or premarket approval. The FDA could also require us to cease marketing and distribution and/or recall the modified device until 510(k) clearance or premarket approval is obtained. Also, in these circumstances, we may be subject to significant regulatory fines or penalties. We have modified aspects of our Thermage and Fraxel Systems and accessories since receiving regulatory clearance, and we have made additional 510(k) filings when we deem it necessary. Decisions and rationale not to file a 510(k) for device modifications are documented.

Clinical Trials

Clinical trials are almost always required to support an FDA premarket application and are sometimes required for 510(k) clearance. In the United States, these trials generally require submission of an application for an Investigational Device Exemption (“IDE”), to the FDA. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE must be approved in advance by the FDA for a specific number of patients unless the product is deemed a non-significant risk device eligible for more abbreviated IDE requirements. Clinical trials for significant risk devices may not begin until the IDE application is approved by the FDA and the appropriate institutional review boards, (“IRB”), at the clinical trial sites.

Our clinical trials must be conducted under the oversight of an IRB at the relevant clinical trial sites and in accordance with FDA regulations, including but not limited to those relating to good clinical practices (GCP). We are also required to obtain patients’ informed consent in compliance with both FDA requirements and state and federal privacy regulations. We, the FDA or the IRB at each site at which a clinical trial is being performed may suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the benefits. Even if a trial is completed, the results of clinical testing may not demonstrate the safety

and efficacy of the device, may be equivocal, or may otherwise not be sufficient to obtain clearance or approval of the product. Similarly, in Europe, clinical studies must be approved by the local ethics committee and in some cases, including studies with high-risk devices, by the Ministry of Health in the applicable country.

Pervasive and Continuing Regulation

After a device is placed on the market, numerous regulatory requirements continue to apply. These include:

•

Quality System Regulations (“QSR”) which require manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process;

•

labeling regulations and FDA prohibitions against the promotion of products for uncleared, unapproved or “off-label” uses;

•

medical device reporting (“MDR”) regulations, which require that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction were to recur; and

•

post-market surveillance regulations, which apply when necessary to protect the public health or to provide additional safety and effectiveness data for the device.

The FDA has broad post-market and regulatory enforcement powers. We and our repair subcontractor are subject to unannounced inspections by the FDA and the Food and Drug Branch of the California Department of Health Services, or CDHS, to determine compliance with the QSR and other regulations. In the past, our facility has been inspected, and observations were noted. The FDA and CDHS have accepted our responses to these observations, and we believe that we are in substantial compliance with the QSRs. The most recent FDA establishment inspection of the Solta Medical facility occurred during the fourth quarter of 2007 and resulted in no observations (483s) noted.

Failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following sanctions:

•

warning letters, fines, injunctions, consent decrees and civil penalties;

•

repair, replacement, refunds, recall or seizure of our products;

•

operating restrictions, partial suspension or total shutdown of production;

•

refusing our requests for 510(k) clearance or premarket approval of new products or new intended uses;

•

withdrawing 510(k) clearance or premarket approvals that are already granted; and

•

criminal prosecution.

If any of these events were to occur, they could have a material adverse effect on our business.

We are also subject to a wide range of federal, state and local laws and regulations, including those related to the environment, health and safety, land use and quality assurance. We believe that compliance with these laws and regulations as currently in effect will not have a material adverse effect on our capital expenditures, earnings and competitive and financial position.

International

International sales of medical devices are subject to foreign governmental regulations, which vary substantially from country to country. The time required to obtain clearance or approval by a foreign country may be longer or shorter than that required for FDA clearance or approval, and the requirements may be different. Some countries, such as Japan, have their own governmental approval process through which clinical trial data and other information are submitted to a regulatory authority. In other countries, a medical device may be commercialized if the product has been approved in the United States or in Europe.

The primary regulatory environment in Europe is that of the European Union, which is primarily governed by the European Union Directive 93/42/EEC, also known as the Medical Device Directive. The European Union and European Standardization Committees have promulgated voluntary standards regulating the design, manufacture, clinical trials, labeling and adverse event reporting for medical devices. Devices that comply with the requirements of a relevant directive will be entitled to bear CE conformity marking, indicating that the device conforms to the essential requirements of the applicable directives and, accordingly, can be commercially distributed throughout the European Union. The method of assessing conformity varies, depending on the type and class of the product, but normally involves a combination of self-assessment by the manufacturer and a third-party assessment by a Notified Body, an independent and neutral institution appointed by a country to conduct an assessment of compliance with applicable directives. This third-party assessment may consist of an audit of the manufacturer’s quality system, standards, and specific testing of the manufacturer’s device. An assessment by a Notified Body is required in order for a manufacturer to commercially distribute a product throughout the participating countries. Our Thermage and Fraxel devices were all previously CE Marked in conformance with applicable medical device directives and can be commercially sold throughout the European Union, as well as in other countries that recognize products bearing the CE Mark. Our facility in Hayward, California was previously awarded the ISO 9001:2000 and the CAN/CSA ISO 13485:2003 certifications. In order to apply CE marking to the Thermage and Fraxel devices under the governance of one Notified Body, we are currently completing a recertification process, which includes a Notified Body reassessment.

Employees

As of December 31, 2009, we had 265 employees, with 111 employees in sales and marketing, 15 employees in technical services, 44 employees in manufacturing operations, 53 employees in research and development including clinical, regulatory and certain quality functions, and 42 employees in general and administrative. We believe that our future success will depend in part on our continued ability to attract, hire and retain qualified personnel. None of our employees is represented by a labor union, and we believe our employee relations are good.

Available Information

You may find on our website at http://www.solta.com electronic copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934. Such filings are placed on our website as soon as reasonably possible after they are filed with the SEC. Our most recent charter for our Audit and Compensation Committees and our Code of Ethics are available on our website as well. In the event that we grant a waiver under our Code of Ethics to any of our officers or directors we will publish it on our website.

You can read our SEC filings over the Internet at the SEC’s web site at www.sec.gov. You may also read and copy any document we file with the SEC at its public reference facilities at 100 F Street, N.E., Room 1580, Washington, D.C. 20549. You may also obtain copies of the documents at prescribed rates by writing to the Public Reference Section of the SEC at 100 F Street, N.E., Room 1580, Washington, D.C. 20549. Please call the SEC at (202) 551-8090 or (800) 732-0330 for further information on the operation of the public reference facilities.

Item 1A.

Risk Factors

Risks Related to Our Business

We are in a difficult economic period, and the uncertainty in the economy has reduced and may continue to reduce patient demand for our products; if there is not sufficient patient demand for Thermage, Fraxel or our recently acquired Isolaz and Isolaz Pro procedures, practitioner demand for our Thermage, Fraxel or our recently acquired Isolaz and Isolaz Pro systems could drop, resulting in unfavorable operating results.

Recent distress in the financial markets has had an adverse impact on our business. The aesthetic treatment system industry in which we operate is particularly vulnerable to economic trends. The decision to undergo a Thermage, Fraxel, Isolaz or Isolaz Pro procedure is driven by consumer demand. Most procedures performed using our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems are elective procedures, the cost of which must be borne by the patient, and are not reimbursable through government or private health insurance. In times of economic uncertainty or recession, individuals often reduce the amount of money that they spend on discretionary items, including aesthetic procedures. The general economic difficulties being experienced by our customers and the lack of availability of consumer credit for some of our customers are adversely affecting the market in which we operate.

If the current situation continues or deteriorates further, our business would be negatively impacted and our financial performance would be materially harmed in the event that any of the above factors discourage patients from seeking Thermage, Fraxel or our recently acquired Isolaz and Isolaz Pro procedures.

We are totally dependent upon the success of our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems, which have a limited commercial history. If our products fail to achieve sufficient market acceptance, our business will suffer.

We expect that sales of our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems, including our treatment tips, will account for substantially all of our revenue for the foreseeable future. We expect to continue to expand our line of systems and treatment tips. This may not occur when expected, or at all, which would negatively affect our anticipated revenue. Our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems may not significantly penetrate current or new markets. If demand for our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems does not increase as we anticipate, or declines, our business, financial condition and results of operations will be harmed.

Our financial results may fluctuate unpredictably, making it difficult to forecast future performance.

Our limited operating history makes it difficult for us to predict future performance. Historically, the demand for our Thermage and Fraxel systems has varied from quarter to quarter. A number of factors, over which we have limited or no control, may contribute to fluctuations in our financial results, such as:

•

delays in receipt of anticipated purchase orders;

•

seasonal variations in patient demand for aesthetic procedures;

•

the impact of general economic conditions on the demand for aesthetic procedures;

•

performance of our independent distributors;

•

the lack of credit available to physicians to finance capital equipment purchases;

•

positive or negative media coverage of our products or products of our competitors or our industry;

•

our ability to obtain further regulatory clearances or approvals;

•

delays in, or failure of, product and component deliveries by our subcontractors and suppliers;

•

changes in the length of the sales process;

•

the costs of litigation claims or adverse outcomes from legal proceedings;

•

customer response to the introduction of new product offerings;

•

fluctuations in foreign currency; and

•

excess or obsolete inventory charges.

Our success depends on growing physician adoption of our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems and continued use of our treatment tips.

Our target physician customers typically already own one or more aesthetic device products. Our ability to grow our business and convince physicians to purchase our systems and products depends on the success of our clinical and sales and marketing efforts. Our business model involves both a capital equipment purchase of our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems and continued purchases by our customers of our treatment tips. This may be a novel business model for many potential customers who may be used to competing products that are either exclusively capital equipment, such as many laser-based systems, or that are exclusively single-use products, such as Botox or dermal fillers. In addition, the lack of credit available to physicians to finance the purchase of Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems may also impact the adoption of these systems. We must be able to demonstrate that the cost of our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems and the revenue that the physician can derive from performing procedures using our product are compelling when compared to the cost and revenue associated with alternative products. When marketing to plastic surgeons, we must also, in some cases, overcome a bias against non-invasive or minimally invasive aesthetic procedures. If we are unable to increase physician adoption of our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems and use of our treatment tips, our financial performance will be adversely affected.

We may not be able to achieve or sustain profitability even if we are able to generate significant revenue.

We incurred a loss of $11.2 million and $16.4 million in the year ended December 31, 2009 and 2008, respectively. In the past, we have expanded our business and increased our expenses in order to grow revenue. We will have to increase our revenue while effectively managing our expenses in order to achieve sustained profitability. Our failure to achieve or sustain profitability could negatively impact the market price of our common stock.

We may not be successful in selling and marketing our new products.

The commercial success of the products and technologies we develop will depend upon the acceptance of these products by physicians and their patients. It is difficult for us to predict how successful recently introduced products and procedures including the Thermage CPT system and Fraxel re:store Dual system, or products we are currently developing, will be over the long term. If the products we develop do not gain market acceptance, our revenues and operating results will suffer. In addition, we expect to face significant competition, in some cases from companies that are more established, market more widely known products and have greater resources than we do. We may not be able to differentiate our new products sufficiently from our competitors’ products to achieve significant market penetration. As a result of these factors, we may incur significant sales and marketing expenses for our new products without achieving commercial success, which could harm our business and our competitive position.

In addition, as new or enhanced products are introduced, we must successfully manage the transition from older products in order to minimize disruption in customers’ ordering patterns, avoid excessive levels of older product inventories, and ensure that enough supplies of new products can be delivered to meet customer demand.

The failure of our systems to meet patient expectations or the occurrence of unpleasant side effects from the Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro procedures could impair our financial performance.

Our future success depends upon patients having a positive experience with the Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro procedures in order to increase physician demand for our products, as a result of both individual patients’ repeat business and as a result of word-of-mouth referrals. We believe that patients may be dissatisfied with the Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro procedures if they find it to be too painful. Furthermore, patients may experience temporary swelling or reddening of the skin as a procedure side effect. In rare instances, patients may receive burns, blisters, skin discoloration or skin depressions. Experiencing excessive pain or any of these side effects or adverse events could discourage a patient from having a Thermage. Fraxel and our recently acquired Isolaz and Isolaz Pro procedure or discourage a patient from having additional procedures or referring Thermage and Fraxel procedures to others. In order to generate repeat and referral business, we also believe that patients must be satisfied with the effectiveness of the procedures. Results obtained from a Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro procedure are subjective and may be subtle. A Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro treatment may produce results that may not meet patients’ expectations. If patients are not satisfied with the procedure or feel that it is too expensive for the results obtained, our reputation and future sales will suffer.

The conditions of our secured term loan contain certain financial covenants with respect to our performance and other covenants that restrict our activities. If we are unable to comply with these covenants, we would have to negotiate an amendment to the loan agreement or the lender could accelerate the repayment of our indebtedness.

Our secured term loan contains certain financial covenants which require us to maintain specified levels of positive EBITDA and tangible net worth (both as defined in the loan agreement) each fiscal quarter. We are also subject to restrictive covenants, including among others covenants that restrict our ability to incur additional indebtedness, to dispose of assets, to effect certain corporate transactions, including specified mergers or acquisitions, and to pay dividends. The loan agreement generally provides for customary events of default, including among others non-payment defaults, covenant defaults, and a default in the event a material adverse change occurs. There is no assurance that we will be able to comply with our financial covenants. Upon the occurrence of an event of default under the term loan, the lender will be entitled to acceleration of all obligations under the loan agreement and an obligation to repay all obligations in full and such event of default could result in an increase to the applicable interest rate of 5.00%. Any acceleration in the repayment of our indebtedness could adversely affect our business.

We may face problems with our acquisition of Aesthera Corporation.

On February 26, 2010, we completed our acquisition of Aesthera Corporation, or Aesthera, a developer, manufacturer and marketer of light-based aesthetic treatment systems. We cannot be certain that the acquisition of Aesthera will be successful or that we will realize the anticipated benefits of the acquisition. In particular, we may not be able to realize the strategic and operational benefits and objectives we had anticipated, including, greater revenue and market opportunities, maintaining industry leadership and consistent profitability. In addition, the demand for our combined product offerings may fluctuate and we may face increased competition into the markets for our products. Any of these factors and the following factors, as well as the inability to realize

the long-term anticipated efficiencies and synergies of the acquisition of Aesthera, may have a material adverse effect on our business, operating results and financial condition. These factors may include:

•

the potential disruption of the combined company’s ongoing business and diversion of management resources;

•

the possibility that the business cultures are not compatible;

•

the difficulty of incorporating acquired products, technology and rights into the combined company’s products and services;

•

unanticipated expenses related to integration of operations;

•

the impairment of relationships with employees and customers as a result of any integration of new personnel;

•

potential unknown liabilities associated with the acquired business and technology;

•

potential periodic impairment of goodwill and intangible assets acquired; and

•

potential inability to retain, integrate and motivate key personnel.

Any acquisitions that we make could disrupt our business and harm our financial condition.

Our growth strategy includes evaluation of potential strategic acquisitions of complementary businesses, products or technologies. We may also consider joint ventures and other collaborative projects. We have incurred integration costs related to the acquisition of Reliant. We may incur similar expenses in future periods as we complete our integration plan in connection with our acquisition of Aesthera Corporation, as well as expenses associated with evaluation of other potential strategic transactions. Such expenditures could negatively impact our financial performance in future periods.

We may not be able to successfully integrate the combined business, products or technologies. In addition, the integration of such acquisition and management of any collaborative project may divert management’s time and resources from our core business and disrupt our operations. If we decide to expand our product offerings, we may spend time and money on projects that do not increase our revenue. Any cash acquisition we pursue would diminish funds available to us for other uses, and any stock acquisition would dilute our stockholders’ ownership. While we from time to time evaluate potential collaborative projects and acquisitions of businesses, products and technologies, and anticipate continuing to make these evaluations, we have no present understandings, commitments or agreements with respect to any other acquisitions or collaborative projects.

We may fail to effectively build and manage our sales force or to market and distribute our products.

We rely on a direct sales force to sell our products in the United States and in certain international regions. As the Company grows, we expect to grow or realign our sales organization to meet our anticipated sales objectives. There are significant risks involved in building and managing our sales organization, including risks related to our ability to:

•

hire qualified individuals as needed;

•

provide adequate training for the effective sale of our products; and

•

retain and motivate our sales employees.

In addition, sales to non-traditional practitioners of aesthetic procedures is a key element of our growth strategy. However, our sales force historically has sold primarily to dermatologists and plastic surgeons. Also, our systems compete with products that are well-established in the market. Accordingly, it is difficult for us to predict how well our sales force will perform. Our failure to adequately address these risks could have a material adverse effect on our ability to sell our products, causing our revenue to be lower than expected and harming our results of operations.

We may be required to raise additional capital and/or debt financing on unfavorable terms.

Our future liquidity requirements may increase beyond currently expected levels if we fail to achieve sustained profitability or if unanticipated expenses or other uses of cash arise. In order to meet our liquidity needs, we may be required to seek additional equity and/or debt financing. Additional financing may not be available on a timely basis on terms acceptable to us, or at all, particularly in the short-term due to the current credit and equity market funding environments. The availability of financing will depend, in part, on market conditions, and the outlook for our company. Any future equity financing would result in substantial dilution to our stockholders. If we raise additional funds by issuing debt, we may be subject to limitations on our operations, through debt covenants or other restrictions. If adequate funds are not available, we may have to delay development of new products or reduce marketing, customer support or other resources devoted to our products. In addition, if we are unable to obtain financing as needed, we may come into breach of our outstanding loan covenants. Any of these factors could harm our business and financial condition.

We are involved in intellectual property litigation, which could be costly and time consuming, and may impact our future business and financial performance.

We advised Alma Lasers Ltd. and Alma Lasers, Inc. (together “Alma”) as early as February 2006 that Alma’s Accent product infringed numerous Thermage patents. On April 26, 2007 Alma filed a lawsuit against us in the United States District Court for the District of Delaware requesting a declaratory judgment that Alma’s Accent product does not infringe our patents and that our patents are invalid. We believe that we have meritorious defenses in this action and intend to defend the action vigorously. On June 20, 2007, we filed patent infringement counterclaims against Alma in the United States District Court for the District of Delaware asserting that Alma’s AccentXL and Harmony systems infringe ten of our U.S. patents. The counterclaims were amended on December 10, 2007 to include a claim of infringement of an eleventh patent. In addition to damages and attorney fees, we are asking the Court to enjoin Alma from further infringement. During May, June and July 2008, Alma filed with the United States Patent and Trademark Office requests that all of the 11 patents asserted by us be reexamined. The United States Patent and Trademark Office has made rejections of some claims in each of these 11 patents. We believe the United States Patent and Trademark Office will reaffirm the validity of our patents. Although we do not believe the final disposition of these matters will have a material adverse effect on our financial statements and future cash flows, our intellectual property has not been tested at trial. If we initiate litigation to protect our rights, we run the risk of having our patents invalidated, which would undermine our competitive position.

Litigation related to infringement and other intellectual property claims, with or without merit, is unpredictable, can be expensive and time-consuming and could divert management’s attention from our core business. If we lose this kind of litigation, a court could require us to pay substantial damages, and prohibit us from using technologies essential to our products, any of which would have a material adverse effect on our business, results of operations and financial condition. We do not know whether necessary licenses would be available to us on satisfactory terms, or whether we could redesign our products or processes to avoid infringement.

Our industry has been characterized by frequent intellectual property litigation. Our competitors or other patent holders may assert that our products and the methods we employ are covered by their patents. If our products or methods are found to infringe, we could be prevented from marketing them. In addition, we do not

know whether our competitors or potential competitors have applied for, or will apply for or obtain, patents that will prevent, limit or interfere with our ability to make, use, sell, import or export our products. Competing products may also appear in other countries in which our patent coverage might not exist or be as strong. If we lose a foreign patent lawsuit, we could be prevented from marketing our products in one or more countries.

In addition, we may hereafter become involved in litigation to protect our trademark rights associated with our company name or the names used with our products. Names used with our products and procedures may be claimed to infringe names held by others or to be ineligible for proprietary protection. If we have to change the name of our company or products, we may experience a loss in goodwill associated with our brand name, customer confusion and a loss of sales.

We are involved in litigation relating to our acquisition of Reliant Technologies, Inc., which could be costly and time consuming.

On December 21, 2009, a complaint was filed in the Santa Clara County Superior Court by three former stockholders of Reliant Technologies, Inc. against Reliant and certain former officers and directors of Reliant in connection with our acquisition of Reliant, which closed on December 23, 2008. The complaint purports to be brought on behalf of the former common stockholders of Reliant. As a result of the acquisition, a successor entity to Reliant, Reliant Technologies, LLC, became our wholly-owned subsidiary. Eric Stang and Leonard DeBenedictis are among the defendants named in the complaint. Messrs. Stang and DeBenedictis are members of our board of directors, and Mr. DeBenedictis is our Chief Technology Officer. The principal claim, among others, is that Reliant violated the California Corporations Code by failing to obtain the vote from a majority of holders of Reliant’s common stock prior to the consummation of the acquisition. The complaint also purports to challenge disclosures made by Reliant in connection with its entry into the acquisition and that the defendants failed to maximize the value of Reliant for the benefits of Reliant’s common stockholders. We believe that this suit is without merit, and we intend to vigorously defend it. Although we do not expect that the final disposition of this litigation will have a material adverse effect on our financial results, we may have to devote certain personnel and resources to resolve this litigation.

Intellectual property rights may not provide adequate protection for our products, which may permit third parties to compete against us more effectively.

We rely on a combination of patent, copyright, trademark and trade secret laws and confidentiality and invention assignment agreements to protect our intellectual property rights. As of December 31, 2009, we had 74 issued U.S. patents, 73 pending U.S. patent applications, 52 issued foreign patents and 72 pending foreign patent applications, some of which foreign applications preserve an opportunity to pursue patent rights in multiple countries. Some of our system components are not, and in the future may not be, protected by patents. Additionally, our patent applications may not issue as patents or, if issued, may not issue in a form that will be advantageous to us. Any patents we obtain may be challenged, invalidated or legally circumvented by third parties. Consequently, competitors could market products and use manufacturing processes that are substantially similar to, or superior to, ours. We may not be able to prevent the unauthorized disclosure or use of our technical knowledge or other trade secrets by consultants, vendors, former employees or current employees, despite the existence generally of confidentiality agreements and other contractual restrictions. Monitoring unauthorized uses and disclosures of our intellectual property is difficult, and we do not know whether the steps we have taken to protect our intellectual property will be effective. Moreover, we do not have patent rights in all foreign countries in which a market may exist, and where we have applied for foreign patent rights, the laws of many foreign countries will not protect our intellectual property rights to the same extent as the laws of the United States.

In addition, competitors could purchase our systems and attempt to replicate some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our protected technology or develop their own competitive technologies that fall outside of our intellectual property

rights. If our intellectual property is not adequately protected so as to protect our market against competitors’ products and methods, our competitive position could be adversely affected, as could our business.

Performing clinical studies on, and collecting data from, the Thermage or Fraxel procedures is inherently subjective, and we have limited data regarding the efficacy of our systems. If future data is not positive or consistent with our prior experience, rates of physician adoption will likely be harmed.

We believe that in order to significantly grow our business, we will need to conduct future clinical studies of the effectiveness of our Thermage and Fraxel systems. Clinical studies of aesthetic treatments are subject to a number of limitations. First, these studies do not involve well-established objective standards for measuring the effectiveness of treatment. Subjective, before and after, evaluation of the extent of change in the patient’s appearance, performed by a medical professional or by the patient, is the most common method of evaluating effectiveness. A clinical study may conclude that a treatment is effective even if the change in appearance is subtle and not long-lasting. Second, as with other non-invasive or minimally invasive energy-based devices, the effect of the Thermage and Fraxel procedures vary from patient to patient and can be influenced by a number of factors, including the area of the body being treated, the age and skin laxity of the patient and operator technique.

We have not conducted any head-to-head clinical studies that compare results from treatment with our systems to surgery or treatment with other aesthetic devices. Without head-to-head studies against competing alternative treatments, which we have no current plans to conduct, potential customers may not find clinical studies of our technology sufficiently compelling to purchase our Thermage and Fraxel systems. If we decide to pursue additional studies in the future, they could be expensive and time consuming, and the data collected may not produce favorable or compelling results. If the results of such studies do not meet physicians’ expectations, our Thermage and Fraxel systems may not become widely adopted, physicians may recommend alternative treatments for their patients, and our business may be harmed.

To successfully market and sell our systems internationally, we must address many issues with which we have limited experience.

International sales accounted for 54% of our revenue for the year ended December 31, 2009 and 48% of our revenue for each of the years ended December 31, 2008 and 2007. We believe that a significant portion of our business will continue to come from international sales through increased penetration in countries where we currently sell our products, combined with expansion into new international markets. However, international sales are subject to a number of risks, including:

•

difficulties in staffing and managing our international operations;

•

difficulties in penetrating markets in which our competitors’ products are more established;

•

reduced or no protection for intellectual property rights in some countries;

•

export restrictions, trade regulations and foreign tax laws;

•

regulation of the sale of the hydroflurocarbon used with our ThermaCool system;

•

fluctuating foreign currency exchange rates;

•

foreign certification and regulatory clearance or approval requirements;

•

difficulties in developing effective marketing campaigns for unfamiliar, foreign countries;

•

dependence on third-party distributors in some territories;

•

customs clearance and shipping delays;

•

political and economic instability;

•

preference for locally produced products;

•

business interruption resulting from transitioning to direct sales from international distributors in certain international regions; and

•

difficulties in getting distributors to relinquish regulatory documentation.

If one or more of these risks were realized, it could require us to dedicate significant resources to remedy the situation, and if we are unable to find a solution, our revenue may decline.

To market and sell our products internationally, we depend on distributors, and they may not be successful.

We currently depend primarily on third-party distributors to sell and service our products internationally and to train our international customers, and if these distributors terminate their relationships with us or under-perform we may be unable to maintain or increase our level of international revenue. We will also need to engage additional international distributors to grow our business and expand the territories in which we sell our systems. Distributors may not commit the necessary resources to market, sell and service our products to the level of our expectations. If current or future distributors do not perform adequately, or if we are unable to engage distributors in particular geographic areas, our revenue from international operations will be adversely affected. In addition, from time to time, legal disputes arise when we wish to discontinue a distributor relationship in a given territory or otherwise feel a distributor is not performing adequately. Such disputes have led to legal proceedings that are costly to litigate and that could result in outcomes that are not favorable to us.

New legislation regarding healthcare reform may affect our revenue and financial condition.

The U.S. government is currently considering and may in the future consider healthcare policies and proposals intended to curb rising costs, including those that could significantly affect both private and public reimbursement for healthcare services. State and local governments, as well as a number of foreign governments, are also considering or have adopted similar types of policies. Such policies and proposals include changes that would change the dynamics of the health care industry, including having the federal or one or more state governments assume a larger role in the health care system such as competing with private health insurers, imposing new taxes on health insurers, or restructuring of the Medicare or Medicaid programs. It is unclear which, if any, of the various U.S. healthcare reforms currently being discussed and/or proposed might be enacted by the U.S. Congress and signed into law. We are unable to predict what healthcare reform legislation or regulations, if any, will be enacted in the U.S.; whether other healthcare legislation or regulations affecting our business may be proposed or enacted in the future; what effect any legislation or regulation would have on our business; or the effect ongoing uncertainty about these matters will have on the purchasing decisions of our customers.

We compete against companies that have more established products, longer operating histories and greater resources, which may prevent us from achieving significant market penetration or increased operating results.

The aesthetics market is highly competitive and dynamic, and is marked by rapid and substantial technological development and product innovations. Demand for our products could be diminished by equivalent or superior products and technologies offered by competitors. Specifically, our products compete against a variety of offerings in the aesthetics market, including laser and other light-based medical devices, pharmaceutical products such as Botox, filler injections, chemical peels, microdermabrasion, liposuction,

cosmetic surgical procedures and less invasive surgical solutions such as implanted sutures. Our closest competitors are makers of laser and other light-based devices, which include companies such as Alma Lasers, Cutera, Cynosure, Lumenis, Lutronic, Palomar Medical Technologies, Sciton and Syneron Medical.

Competition in the aesthetics market could result in price-cutting, reduced profit margins and loss of market share, any of which would harm our business, financial condition and results of operations. Our ability to compete effectively depends upon our ability to distinguish our company and our products from our competitors and their products, and on such factors as:

•

safety and effectiveness;

•

product pricing;

•

success of our marketing initiatives;

•

compelling clinical data;

•

intellectual property protection;

•

quality of customer support; and

•

development of successful distribution channels, both domestically and internationally.

Some of our competitors have more established products and customer relationships than we do, which could inhibit our market penetration efforts. For example, we have encountered, and expect to continue to encounter, situations where, due to pre-existing relationships, potential customers decided to purchase additional products from our competitors. Potential customers also may need to recoup the cost of expensive products that they have already purchased from our competitors and thus may decide not to purchase our products, or to delay such purchase. If we are unable to achieve continued market penetration, we will be unable to compete effectively and our business will be harmed.

In addition, some of our current and potential competitors have significantly greater financial, research and development, manufacturing, and sales and marketing resources than we have. Our competitors could utilize their greater financial resources to acquire other companies to gain enhanced name recognition and market share, as well as new technologies or products that could effectively compete with our existing product line. Given the relatively few competitors currently in the market, any business combination could exacerbate any existing competitive pressures, which could harm our business.

Competition among providers of devices for the aesthetics market is characterized by rapid innovation, and we must continuously develop new products or our revenue may decline.

While we attempt to protect our products through patents and other intellectual property rights, there are few barriers to entry that would prevent new entrants or existing competitors from developing products that compete directly with ours. As we continue to create market demand for non-surgical, non-invasive or minimally invasive treatments, competitors will enter the market with other products making similar or superior claims. We expect that any competitive advantage we may enjoy from our current and future innovations may diminish over time, as companies successfully respond to our, or create their own, innovations. Consequently, we believe that we will have to continuously innovate and improve our products and technology to compete successfully. If we are unable to innovate successfully, our systems could become obsolete and our revenue will decline as our customers purchase competing products.

Our products may have undetected and unforeseen design flaws, and may experience failures particularly when first introduced, or at any time during their lifecycle. Any product recall as a result of flaws or failures could result in the loss of or delays in market acceptance of our products and adversely affect our business and reputation. Correcting defects can be time consuming. Any significant returns or warranty claims could result in significant additional costs to us and could adversely affect our results of operations.

Negative publicity regarding our Thermage, Fraxel or future procedures could harm demand, which would adversely affect sales and our financial performance.

We have in the past experienced, and expect that in the future we will experience, negative media exposure. Such publicity may present negative individual physician or patient experience regarding the safety or effectiveness of our procedures. Competitors could attempt to use such publicity to harm our reputation and disrupt current or potential future customer relationships. While, to date, we have not observed a material impact on our quarterly financial results of operations from negative publicity, future results could be negatively impacted. Additionally, while we believe that obtaining positive publicity is important to our success, and it is an important component of our marketing efforts, we have also not observed a material impact on our quarterly financial results of operations from positive publicity.

Our reputation and competitive position may be harmed not only by negative media exposure, but also by other publicly-available information suggesting that our procedures are not safe. For example, we file adverse event reports with the FDA that are publicly available on the FDA’s website if our product may have caused or contributed to a serious injury or malfunctioned in a way that would likely cause or contribute to a serious injury if it were to recur. Competitors may attempt to harm our reputation by pointing to isolated injuries that have been reported or publicized, or by claiming that their product is superior because they have not filed as many adverse event reports with the FDA. Such negative publicity and competitor behavior could harm our reputation and our future sales.

Our manufacturing operations and those of our key manufacturing subcontractors are dependent upon third-party suppliers, making us vulnerable to supply shortages and price fluctuations, which could harm our business.

Several components and materials that comprise our products are currently manufactured by a single supplier or a limited number of suppliers. In many of these cases, we have not yet qualified alternate suppliers and rely upon purchase orders, rather than long-term supply agreements. A supply interruption or an increase in demand beyond our current suppliers’ capabilities could harm our ability to manufacture our products until new sources of supply are identified and qualified. Our reliance on these suppliers subjects us to a number of risks that could harm our business, including:

•

interruption of supply resulting from modifications to or discontinuation of a supplier’s operations;

•

delays in product shipments resulting from uncorrected defects, reliability issues or a supplier’s variation in a component;

•

a lack of long-term supply arrangements for key components with our suppliers;

•

inability to obtain adequate supply in a timely manner, or to obtain adequate supply on commercially reasonable terms;

•

difficulty locating and qualifying alternative suppliers for our components in a timely manner;

•

production delays related to the evaluation and testing of products from alternative suppliers, and corresponding regulatory qualifications;

•

delay in delivery due to our suppliers prioritizing other customer orders over ours;

•

damage to our brand reputation caused by defective components produced by our suppliers;

•

increased cost of our warranty program due to product repair or replacement based upon defects in components produced by our suppliers; and

•

fluctuation in delivery by our suppliers due to changes in demand from us or their other customers.

Any interruption in the supply of components or materials, or our inability to obtain substitute components or materials from alternate sources at acceptable prices in a timely manner, could impair our ability to meet the demand of our customers, which would have an adverse effect on our business.

If, in the future, we decide to perform additional manufacturing functions internally that we currently outsource, our business could be harmed by our limited manufacturing experience and related capabilities.

We currently perform certain value-added and proprietary manufacturing processes internally at our principal facility, and we outsource the manufacture of components, subassemblies and certain finished products to a limited number of third parties. For financial or operational purposes, we may elect to perform additional component or system manufacturing functions internally. In that event, we may face a number of challenges beyond those that we currently address in our internal assembly, inspection, testing and certification activities. Implementing complex or specialized manufacturing processes could lead to difficulties in producing sufficient quantities of manufactured items that meet our quality standards and that comply with applicable regulatory requirements in a timely and cost-effective manner. In addition, if we experience these types of internal manufacturing difficulties, it may be expensive and time consuming to engage a new or previous subcontractor or supplier to fulfill our replacement manufacturing needs. The occurrence of any of these events could harm our business.

Problems in our manufacturing processes, or those of our manufacturing subcontractors, that lead to an actual or possible malfunction in our products, may require us to recall products from customers and could disrupt our operations. Our results of operations, our reputation and market acceptance of our products could be harmed if we encounter difficulties in manufacturing that result in a recall or patient injury, and delays in our ability to fill customer orders.

We outsource the repair of key elements of some products to sole-source service subcontractors.

We outsource the repair of certain key elements of our systems to sole source contract service providers. If the operations of those service subcontractors are interrupted, we may be limited in our ability to repair equipment. Our service subcontractors are dependent on trained technical labor to effectively repair our products. In addition, our service subcontractors may be operating as medical device manufacturers and as such are required to demonstrate and maintain compliance with the FDA’s Quality System Regulation, or QSR. If our service subcontractors fail to comply with the FDA’s QSR, repair operations could be affected and our ability to repair certain systems may be impaired.

We may not be able to develop an alternative cooling system that will be in compliance with changing environmental regulations in a timely or cost-effective manner.

The cooling capability of our Thermage systems relies upon a hydroflurocarbon, or HFC, called R134a, to protect the outer layer of the skin from over-heating while our device delivers RF energy to the subcutaneous tissue. New environmental regulations phasing out certain HFCs over the next decade have been adopted or are

under consideration in a number of countries, and recent European Union directives require the phase-out of certain HFCs. We have also put in place a solution for the European Union import restrictions. If we are unable to develop an alternative cooling system for our device which is not dependent on R134a in a timely or cost-effective manner, our Thermage systems may not be in compliance with environmental regulations, which could result in fines, civil penalties and the inability to sell our products in certain major international markets.

We forecast sales to determine requirements for components and materials used in our systems, and if our forecasts are incorrect, we may experience delays in shipments or increased inventory costs.

We keep limited materials, components and finished product on hand. To manage our manufacturing operations with our suppliers, we forecast anticipated product orders and material requirements to predict our inventory needs up to six months in advance and enter into purchase orders on the basis of these requirements. Our limited historical experience may not provide us with enough data to accurately predict future demand. If our business expands, our demand for components and materials would increase and our suppliers may be unable to meet our demand. If we overestimate our component and material requirements, we will have excess inventory, which would increase our expenses. If we underestimate our component and material requirements, we may have inadequate inventory, which could interrupt, delay or prevent delivery of systems to our customers. Any of these occurrences would negatively affect our financial performance and the level of satisfaction our customers have with our business.

Even though we require training for users of Thermage and Fraxel systems and do not sell our systems to non-physicians, there exists a potential for misuse, which could harm our reputation and our business.

While we only sell our products to licensed physicians who have met our training requirements, federal regulations allow us to sell our systems to “licensed practitioners.” The definition of “licensed practitioners” varies from state to state. As a result, our systems may be operated by licensed practitioners with varying levels of training, and in many states by non-physicians, including physician assistants, registered nurses and nurse practitioners. Thus, in some states, the definition of “licensed practitioner” may result in the legal use of our products by non-physicians. Outside the United States, our independent distributors sell in many jurisdictions that do not require specific qualifications or training for purchasers or operators of products. We do not supervise the procedures performed with our systems, nor can we be assured that direct physician supervision of our equipment occurs according to our recommendations. We, and our distributors, require purchasers of our products to undergo an initial training session as a condition of purchase, but do not require ongoing training. In addition, we prohibit the sale of our systems to companies that rent our systems to third parties without our approval, but cannot prevent an otherwise qualified physician from contracting with a rental company in violation of their purchase agreement with us. The use of our systems by non-physicians, as well as noncompliance with the operating guidelines set forth in our training programs, may result in product misuse and adverse treatment outcomes, which could harm our reputation and expose us to costly product liability litigation.

Product liability suits could be brought against us due to defective design, labeling, material or workmanship, or misuse of our products, and could result in expensive and time-consuming litigation, payment of substantial damages and an increase in our insurance rates.

If our products are defectively designed, manufactured or labeled, contain defective components or are misused, we may become subject to substantial and costly litigation by our customers or their patients. Misusing our products or failing to adhere to operating guidelines could cause significant skin damage and underlying tissue damage. In addition, if our operating guidelines or product design are found to be inadequate, we may be subject to liability. We have been, continue to be and may, in the future, be involved in litigation related to the use of our products. Product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizable damage awards against us. We may not have sufficient insurance coverage for all future claims. We may not be able to obtain insurance in amounts or scope sufficient to provide

us with adequate coverage against all potential liabilities. Any product liability claim brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing continuing coverage, could harm our reputation in the industry and reduce product sales. Product liability claims in excess of our insurance coverage would be paid out of cash reserves, harming our financial condition and reducing our operating results.

After-market modifications to our treatment tips by third parties and the development of counterfeit treatment tips could reduce our sales, expose us to product liability litigation and dilute our brand quality.

Third parties have introduced adulterated after-market modifications to our treatment tips which have enabled re-use of our treatment tips in multiple procedures. Because our treatment tips are designed to withstand a finite number of firings, modifications intended to increase the number of firings could result in patient injuries caused by the use of worn-out or damaged treatment tips. In addition, third parties may seek to develop counterfeit treatment tips that are compatible with our systems and available to practitioners at lower prices than our own. If security features incorporated into the design of our systems are unable to prevent after-market modifications to our treatment tips or the introduction of counterfeit treatment tips, we could be subject to reduced treatment tip sales, product liability lawsuits resulting from the use of damaged or defective goods and damage to our reputation for providing a quality product.

We depend on skilled and experienced personnel to operate our business effectively. If we are unable to recruit, hire and retain these employees, our ability to manage and expand our business will be harmed, which would impair our future revenue and profitability.

Our success largely depends on the skills, experience and efforts of our officers and other key employees. Many of our officers and key employees do not have employment contracts with us and can terminate their employment at any time. The loss of any of our senior management team members could weaken our management expertise and harm our business.

Our ability to retain our skilled labor force and our success in attracting and hiring new skilled employees will be a critical factor in determining whether we will be successful in the future. We may not be able to meet our future hiring needs or retain existing personnel. We will face particularly significant challenges and risks in hiring, training, managing and retaining engineering and sales and marketing employees, as well as independent distributors, most of whom are geographically dispersed and must be trained in the use and benefits of our products. Failure to attract and retain personnel, particularly technical and sales and marketing personnel, would materially harm our ability to compete effectively and grow our business.

Risks Related to Regulatory Matters

If we fail to obtain and maintain necessary FDA clearances for our systems and indications, if clearances for future products and indications are delayed, not issued or rescinded or if there are federal or state level regulatory changes, our commercial operations would be harmed.

Our Thermage, Fraxel and our recently acquired Isolaz and Isolaz Pro systems are medical devices that are subject to extensive regulation in the United States by the FDA for manufacturing, labeling, sale, promotion, distribution and shipping. Before a new medical device, or a new use of or claim for an existing product, can be marketed in the United States, it must first receive either 510(k) clearance or premarket approval from the FDA, unless an exemption applies. Either process can be expensive and lengthy. The FDA’s 510(k) clearance process usually takes from three to 12 months, but it can last significantly longer. The process of obtaining premarket approval is much more costly and uncertain than the 510(k) clearance process, and it generally takes from one to three years, or even longer, from the time the application is filed with the FDA.

Medical devices may be marketed only for the indications for which they are approved or cleared. We have obtained 510(k) clearance for various indications for our Thermage and Fraxel systems. In addition, 510(k) clearance has been obtained for various indications of our recently acquired Isolaz and Isolaz Pro systems. However, our clearances can be revoked if safety or effectiveness problems develop. We are also subject to Medical Device Reporting regulations, which require us to report to the FDA if our product causes or contributes to a death or serious injury, or malfunctions in a way that would likely cause or contribute to a death or serious injury. Our products are also subject to state regulations which are, in many instances, in flux. Changes in state regulations may impede sales. For example, federal regulations allow our systems to be sold to, or on the order of, “licensed practitioners,” as determined on a state-by-state basis. As a result, in some states, non-physicians may legally purchase and operate our systems. However, a state could change its regulations at any time, disallowing sales to particular types of end users. We cannot predict the impact or effect of future legislation or regulations at the federal or state levels.

The FDA and state authorities have broad enforcement powers. Our failure to comply with applicable regulatory requirements could result in enforcement action by the FDA or state agencies, which may include any of the following sanctions:

•

warning letters, fines, injunctions, consent decrees and civil penalties;

•

repair, replacement, refunds, recall or seizure of our product;

•

operating restrictions or partial suspension or total shutdown of production;

•

refusing our requests for 510(k) clearance or premarket approval of new products, new intended uses or modifications to our existing products;

•

withdrawing 510(k) clearance or premarket approvals that have already been granted; and

•

criminal prosecution.

If any of these events were to occur, our business could be harmed.

If we modify our FDA-cleared devices, we may need to seek and obtain new clearances, which, if not granted, would prevent us from selling our modified product or require us to redesign our product.

Any modification to an FDA-cleared device that would significantly affect its safety or effectiveness or that would constitute a major change in its intended use would require a new 510(k) clearance or possibly a premarket approval. We may not be able to obtain additional 510(k) clearances or premarket approvals for new products or for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and potential future profitability. We have made modifications to our device in the past and may make additional modifications in the future that we believe do not or will not require additional clearances or approvals. If the FDA disagrees, and requires new clearances or approvals for the modifications, we may be required to recall and to stop marketing the modified device, which could harm our operating results and require us to redesign our product.

If we or our repair subcontractors fail to comply with the FDA’s Quality System Regulation, our business would suffer.

We and our repair subcontractors are required to demonstrate and maintain compliance with the FDA’s Quality System Regulation, or QSR. The QSR is a complex regulatory scheme that covers the methods and documentation of the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and

shipping of our product. The FDA enforces the QSR through periodic unannounced inspections. We have been, and anticipate in the future being, subject to such inspections. Our failure, or the failure of our repair subcontractors, to take satisfactory corrective action in response to an adverse QSR inspection could result in enforcement actions, including a public warning letter, a shutdown of our manufacturing operations, a recall of our products, civil or criminal penalties or other sanctions, which would cause our sales and business to suffer.

We may be unable to obtain or maintain international regulatory qualifications or approvals for our current or future products and indications, which could harm our business.

Sales of our products outside the United States are subject to foreign regulatory requirements that vary widely from country to country. In addition, the FDA regulates exports of medical devices from the United States. Complying with international regulatory requirements can be an expensive and time-consuming process and approval is not certain. The time required to obtain clearance or approvals, if required by other countries, may be longer than that required for FDA clearance or approvals, and requirements for such clearances or approvals may significantly differ from FDA requirements. We primarily rely upon third-party distributors to obtain all regulatory clearances and approvals required in countries outside of the United States, and these distributors may be unable to obtain or maintain such clearances or approvals. Our distributors may also incur significant costs in attempting to obtain and in maintaining foreign regulatory approvals or qualifications, which could increase the difficulty of attracting and retaining qualified distributors. If our distributors experience delays in receiving necessary qualifications, clearances or approvals to market our products outside the United States, or if they fail to receive those qualifications, clearances or approvals, we may be unable to market our products or enhancements in international markets effectively, or at all. To support the registration of products outside the United States, we must comply with and be registered to the ISO 13485: 2003-2007 Quality System Standard. Failure to adequately maintain our ISO 13485: 2003-2007 registration may adversely impact or prevent the registration of our products in some foreign countries.

Risks Related to Our Internal Control over Financial Reporting

While we believe we currently have adequate internal control over financial reporting, we are required to assess our internal control over financial reporting on an annual basis and any future adverse results from such assessment could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock.

Pursuant to the Sarbanes-Oxley Act of 2002 and the rules and regulations promulgated by the SEC, we are required to maintain disclosure controls and procedures and adequate internal control over financial reporting. Under such requirements we must furnish in our Form 10-K a report by our management regarding the effectiveness of our internal control over financial reporting. The report includes, among other things, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether or not our internal control over financial reporting is effective. This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by management. While we currently believe our internal control over financial reporting is effective, the effectiveness of our internal controls in future periods is subject to the risk that our controls may become inadequate because of changes in conditions. The effectiveness of our controls and procedures may in the future be limited by a variety of factors, including:

•

faulty human judgment and simple errors, omissions or mistakes;

•

fraudulent action of an individual or collusion of two or more people;

•

inappropriate management override of procedures; and

•

the possibility that any enhancements to controls and procedures may still not be adequate to assure timely and accurate financial information.

If we are unable to assert that our internal control over financial reporting is effective in any future period, or if and when applicable, our auditors are unable to express an opinion on the effectiveness of our internal controls, or conclude that our internal controls are ineffective, or if we fail to maintain adequate and effective internal control over financial reporting, we could lose investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our stock price.

Risks Related to Our Common Stock

If our public guidance or our future operating performance does not meet investor expectations, our stock price could decline.

We provide guidance to the investing community regarding our anticipated future operating performance. Our business typically has a short sales cycle, so that we do not have significant backlog of orders at the start of a quarter, and our ability to sell our products successfully is subject to many uncertainties, as discussed in the foregoing risk factors. In light of these factors, and the uncertainty as a result of the general economic situation, it is difficult for us to estimate with accuracy our future results. Our expectations regarding these results will be subject to numerous risks and uncertainties that could make actual results differ materially from those anticipated. If our actual results do not meet our public guidance or our guidance or actual results do not meet the expectations of third-party financial analysts, our stock price could decline significantly.

We expect that the price of our common stock will fluctuate substantially.

The market price of our common stock is likely to be highly volatile and may fluctuate substantially due to many factors, including:

•

volume and timing of sales of our products;

•

the introduction of new products or product enhancements by us or our competitors;

•

disputes or other developments with respect to our intellectual property rights or the intellectual property rights of others;

•

our ability to develop, obtain regulatory clearance or approval for and market new and enhanced products on a timely basis;

•

product liability claims or other litigation;

•

quarterly variations in our or our competitors’ results of operations;

•

sales of large blocks of our common stock, including sales by our executive officers and directors;

•

developments in our industry;

•

media exposure of our products or products of our competitors;

•

changes in governmental regulations or in the status of our regulatory approvals or applications;

•

changes in earnings estimates or recommendations by securities analysts; and

•

general market conditions and other factors, including factors unrelated to our operating performance or the operating performance of our competitors.

These and other factors may make the price of our stock volatile and subject to unexpected fluctuation.

A sale of a substantial number of shares of our common stock may cause the price of our common stock to decline.

If our stockholders sell substantial amounts of our common stock in the public market, for example, liquidation of shares held by our principal stockholders, including shares issued upon the exercise of outstanding options, the market price of our common stock could decline. These sales also might make it more difficult for us to sell equity or equity-related securities in the future at a time and price that we deem reasonable or appropriate.

Our directors, officers and principal stockholders have significant voting power and may take actions that may not be in the best interests of our other stockholders.

Our officers, directors and principal stockholders each holding more than 5% of our common stock collectively control approximately 35% of our outstanding common stock. As a result, these stockholders, if they act together, will be able to significantly influence the management and affairs of our company and most matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. This concentration of ownership may have the effect of delaying or preventing a change in control and might adversely affect the market price of our common stock. This concentration of ownership may not be in the best interests of our other stockholders.

Anti-takeover provisions in our Amended and Restated Certificate of Incorporation and Bylaws, and Delaware law, contain provisions that could discourage a takeover.

Our certificate of incorporation and bylaws, and Delaware law, contain provisions that might enable our management to resist a takeover, and might make it more difficult for an investor to acquire a substantial block of our common stock. These provisions include:

•

a classified board of directors;

•

advance notice requirements to stockholders for matters to be brought at stockholder meetings;

•

a supermajority stockholder vote requirement for amending certain provisions of our Amended and Restated Certificate of Incorporation and Bylaws;

•

limitations on stockholder actions by written consent; and

•

the right to issue preferred stock without stockholder approval, which could be used to dilute the stock ownership of a potential hostile acquirer.

These provisions might discourage, delay or prevent a change in control of our company or a change in our management. The existence of these provisions could adversely affect the voting power of holders of common stock and limit the price that investors might be willing to pay in the future for shares of our common stock.

We have a large number of authorized but unissued shares of stock, which could negatively impact a potential investor if they purchased our common stock.

Our certificate of incorporation provides for 100,000,000 shares of authorized common stock, of which more than one-third of the shares are available for future issuance, and 10,000,000 shares of authorized preferred stock, all of which are available for future issuance. The issuance of additional shares of common stock may have a dilutive effect on earnings per share and relative voting power. We could use the shares of common stock that are available for future issuance in dilutive equity financing transactions, or to oppose a hostile takeover attempt

or delay or prevent changes in control or changes in or removal of management, including transactions that are favored by a majority of the stockholders or in which the stockholders might otherwise receive a premium for their shares over then-current market prices or benefit in some other manner.

Our board of directors will be authorized, without further stockholder approval, to issue up to 10,000,000 shares of preferred stock with such rights, preferences and privileges as our board may determine. These rights, preferences and privileges may include dividend rights, conversion rights, voting rights and liquidation rights that may be greater than the rights of our common stock. As a result, the rights of holders of our common stock will be subject to, and could be adversely affected by, the rights of holders of any preferred stock that may be issued in the future.

We have not paid dividends in the past and do not expect to pay dividends in the future, and any return on investment may be limited to the value of our stock.

We have never paid cash dividends on our common stock and do not anticipate paying cash dividends on our common stock in the foreseeable future. The payment of dividends on our common stock will depend on our earnings, financial condition and other business and economic factors affecting us at such time as our board of directors may consider relevant. If we do not pay dividends, our stock may be less valuable because a return on your investment will only occur if our stock price appreciates.

Item 1B.

Unresolved Staff Comments

None.

Item 2.

Properties

We occupy an 88,000 square foot facility in Hayward, California, under a lease that ends in September 2013, with an option to extend for an additional thirty months. We believe our facilities are adequate for our current and future needs for at least the next 12 months.

Item 3.

Legal Proceedings

We advised Alma Lasers, Ltd. and Alma Lasers, Inc. (together, “Alma”) as early as February 2006 that its Accent product infringed numerous Thermage patents.

On April 26, 2007, Alma filed a lawsuit against us in the United States District Court for the District of Delaware requesting declaratory judgment that Alma’s Accent product does not infringe Thermage’s patents and that Thermage’s patents are invalid. We believe that we have meritorious defenses in this action and intend to defend the action vigorously.

On December 21, 2009, a complaint was filed in the Santa Clara County Superior Court by three former stockholders of Reliant Technologies, Inc. against Reliant and certain former officers and directors of Reliant in connection with our acquisition of Reliant, which closed on December 23, 2008. The complaint purports to be brought on behalf of the former common stockholders of Reliant. As a result of the acquisition, a successor entity to Reliant, Reliant Technologies, LLC, became our wholly-owned subsidiary. Two of the Company’s Board of Directors are among the defendants named in the complaint, and one of the two is also the Company’s Chief Technology Officer. The principal claim, among others, is that Reliant violated the California Corporations Code by failing to obtain the vote from a majority of holders of Reliant’s common stock prior to the consummation of the acquisition. The complaint also purports to challenge disclosures made by Reliant in connection with its entry into the acquisition and that the defendants failed to maximize the value of Reliant for the benefits of Reliant’s common stockholders. We believe that this suit is without merit, and we intend to vigorously defend it. Although we do not expect that the final disposition of this litigation will have a material adverse effect on our financial results, we may have to devote certain personnel and resources to resolve this litigation.

On December 4, 2009, Aesthera was served with a class action complaint filed in the United States District Court for the District of Connecticut alleging that Aesthera caused unsolicited fax advertisements to be sent to the plaintiffs in violation of the Telephone Consumer Protection Act, or TCPA, and Connecticut state law. The complaint purports to be filed on behalf of a class, and it alleges that Aesthera caused unsolicited fax advertisements to be sent from August 1, 2006 through the present. Plaintiffs seek statutory damages under the TCPA and Connecticut state law, attorneys’ fees and costs of the action, and an injunction to prevent any future violations. We do not believe the final disposition of this action will have a material adverse effect on our financial statements and future cash flows. We believe that we have meritorious defenses in this action and intend to defend the action vigorously.

In addition, from time to time, we are subject to legal proceedings and claims with respect to such matters as patents, intellectual property rights, product liability claims and contractual disputes with distributors, suppliers and others, arising out of the normal course of business. Litigating claims of these types, whether or not ultimately determined in our favor or settled by us, is costly and diverts the efforts of management and other personnel from normal business operations. The results of legal proceedings cannot be predicted with certainty. Should the Company fail to prevail in any of these legal matters or should several of these legal matters be resolved against the Company in the same reporting period, the operating results of a particular reporting period could be materially adversely affected.

Item 4.

Removed and Reserved.

PART II

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities

Stock Exchange Listing

Our common stock trades on the Nasdaq Global Market under the symbol “SLTM”. On February 26, 2010, the closing sale price of our common stock was $1.98 per share.

Common Stockholders

As of February 26, 2010, there were approximately 179 stockholders of record of our common stock, one of whom was CEDE & Co, a large clearing house that holds shares in its name for banks, brokers and institutions, in order to expedite the sale and transfer of stock. Since many stockholders’ shares are listed under their brokerage firm’s name, we believe the actual number of stockholders is approximately 3,400.

Stock Prices

The following table sets forth quarterly high and low closing sales prices of our common stock for the indicated periods:


	High		Low
Year Ended December 31, 2008
First Quarter	$	6.25	$	3.28
Second Quarter		3.44		2.65
Third Quarter		4.34		2.20
Fourth Quarter		3.50		1.15

Year Ended December 31, 2009
First Quarter	$	1.56	$	0.64
Second Quarter		1.67		0.60
Third Quarter		2.27		1.27
Fourth Quarter		2.72		1.88

Dividend Policy

We have never paid a cash dividend and have no present intention to pay cash dividends in the foreseeable future. The board of directors currently intends to retain any future earnings for use in our business. Pursuant to our loan agreement with Silicon Valley Bank, we are prohibited from making any cash payments for dividends or purchasing or redeeming any of our equity securities, returning any capital to any holder of our equity securities.

Securities Authorized for Issuance Under Equity Compensation Plans

The information required by this Item regarding equity compensation plans is incorporated by reference to the information set forth in PART III Item 12 of this Annual Report on Form 10-K.

Stock Performance Graph

The following graph compares the cumulative total stockholder return on our common stock with the cumulative total return of the Nasdaq Composite Index and the Nasdaq Medical Equipment Index for the period beginning on November 10, 2006, our first day of trading after our initial public offering, and ending on December 31, 2009.

LOGO

The graph assumes that $100 was invested on November 10, 2006 in our common stock, or on October 31, 2006 in the Nasdaq Composite Index and the Nasdaq Medical Equipment Index, and that all dividends were reinvested. No dividends have been declared or paid on our common stock. Stock performance shown in the above chart for the common stock is historical and should not be considered indicative of future price performance. This graph was prepared by Research Data Group, Inc.

Item 6.

Selected Financial Data

The following table presents certain financial data for each of the last five fiscal years. You should read the 2009 through 2007 financial information together with the information under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes included in this Form 10-K.

Consolidated Statement of Operations Data


	Years Ended December 31,
*(in thousands of dollars, except share and per share data)*	2009			2008*			2007		2006			2005
Net revenue	$	98,818		$	56,681		$	63,101	$	54,320		$	40,655
Cost of revenue	$	40,565			15,066			15,976		15,259			12,309

Gross margin		58,253			41,615			47,125		39,061			28,346
Operating expenses
Sales and marketing	$	38,931			27,001			26,195		24,071			19,997
Research and development	$	16,246			9,502			9,099		9,639			8,908
General and administrative	$	14,659			13,662			11,300		9,973			7,414
Acquired in-process research and development		—			9,060			—		—			—
Litigation settlement gain		—			—			—		—			(1,646	)

Total operating expenses		69,836			59,225			46,594		43,683			34,673

Income (loss) from operations		(11,583	)		(17,610	)		531		(4,622	)		(6,327	)
Interest and other income	$	462			2,334			2,520		768			340
Interest, warrants and other expenses	$	(394	)		(15	)		—		(55	)		(1,549	)
Loss on investments	$	224			(1,088	)		—		—			—

Income (loss) before income taxes and cumulative effect of change in accounting principle		(11,291	)		(16,379	)		3,051		(3,909	)		(7,536	)
Provision (benefit) for income taxes		(99	)		14			271		—			—

Net income (loss) before cumulative effect of change in accounting principle		(11,192	)		(16,393	)		2,780		(3,909	)		(7,536	)

Cumulative effect of change in accounting principle		—			—			—		—			(697	)

Net income (loss)	$	(11,192	)	$	(16,393	)	$	2,780	$	(3,909	)	$	(8,233	)

Net income (loss) allocable to common stockholders	$	(11,192	)	$	(16,393	)	$	2,780	$	(3,909	)	$	(8,233	)

Net income (loss) per share — basic and diluted:
Before cumulative effect of change in accounting principle												$	(2.06	)
Cumulative effect of change in accounting principle													(0.19	)

Net income (loss) per share — basic	$	(0.23	)	$	(0.67	)	$	0.12	$	(0.60	)	$	(2.25	)

Net income (loss) per share — diluted	$	(0.23	)	$	(0.67	)	$	0.11	$	(0.60	)	$	(2.25	)

Weighted average shares outstanding used in calculating net income (loss) per common share:
Basic		47,848,258			24,506,673			23,241,031		6,561,648			3,664,990

Diluted		47,848,258			24,506,673			24,884,458		6,561,648			3,664,990

*	Includes the effect of the acquisition of Reliant Technologies, Inc. on December 23, 2008 and the results of operations of Reliant Technologies, Inc from December 23, 2008 to December 31, 2008.

Consolidated Balance Sheet Data


	As of December 31,
*(in thousands of dollars)*	2009		2008		2007		2006		2005
Cash and cash equivalents	$	14,744	$	7,556	$	13,650	$	45,915	$	10,121
Marketable investments		—		17,870		38,707		—		—
Working capital		14,462		13,864		55,834		46,153		10,947
Total assets		136,149		149,168		68,727		59,875		24,032
Short and long-term borrowings		11,058		12,399		—		—		4,848
Preferred stock warrant liability		—		—		—		—		3,937
Redeemable convertible preferred stock		—		—		—		—		45,169
Total stockholders’ equity (deficit )	$	100,237	$	107,824	$	58,118	$	49,121	$	(38,733	)

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the attached financial statements and notes thereto. This Annual Report on Form 10-K, including the following sections, contains forward-looking statements within the meaning of the federal securities laws. These statements include, but are not limited to, introduction of new procedures and associated treatment tips in the future; sales organization growth; growth in international sales and expansion into new international markets; and our belief that our cash, cash equivalents and marketable investments, along with our credit facility will satisfy our anticipated cash requirements. These statements are subject to risks and uncertainties that could cause actual results and events to differ materially from those expressed or implied by such forward-looking statements. For a detailed discussion of these risks and uncertainties, see “Risk Factors” section in Item 1A of this Annual Report on Form 10-K. We caution the reader not to place undue reliance of these forward-looking statements, which reflect management’s analysis only as of the date of this Form 10-K. We undertake no obligation to update forward-looking statements, which reflect events or circumstances occurring after the date of this Form 10-K.

Overview

We design, develop, manufacture and market aesthetic energy devices to address aging skin. We were incorporated in 1996 and received FDA clearance for treatment of periorbital wrinkles and commercially launched our first Thermage system in 2002. In June 2004, we received FDA clearance for the treatment of facial wrinkles and rhytides. In December 2005, we received FDA clearance to market our system for the treatment of wrinkles and rhytides, without limitation to particular areas of the body. In October 2006, we received FDA clearance to market our system for the temporary improvement in the appearance of cellulite. In June 2007, we received clearance to market our system for treatment of wrinkles and rhytides for the upper and lower eyelids. In June 2009, we received FDA clearance to market our latest Thermage system and hand piece configuration for wrinkles, rhytides and for the temporary improvement in the appearance of cellulite. Our patented and FDA-cleared systems uses radiofrequency, or RF, energy to heat and shrink collagen and tighten tissue while simultaneously cooling and protecting the surface of the skin.

Laser devices used for aesthetic procedures, such as skin resurfacing, are also generally regulated as Class II medical devices, requiring 510(k) clearance. The FDA has granted eleven 510(k) clearances for four Fraxel devices relating to multiple indications for use. We received FDA clearance to market our first generation Fraxel SR750 system for coagulation of soft tissue in November 2003 and subsequently for treatment of periorbital wrinkles (June 2004), pigmented lesions (June 2004), melasma (March 2005), skin resurfacing procedures (July 2005) and acne and surgical scars (March 2006). In March 2006, we received FDA clearance to market our Fraxel re:store system for soft tissue coagulation and for treatment of periorbital wrinkles, pigmented lesions, melasma and skin resurfacing. We subsequently received FDA clearance for the Fraxel re:store for treatment of acne and surgical scars in January 2007 and for actinic keratoses in May 2007. In April 2007, we received FDA clearance to market the Fraxel re:fine system for soft tissue coagulation and for treatment of periorbital wrinkles, pigmented lesions, melasma, skin resurfacing, acne scars and surgical scars. The Fraxel re:pair system was cleared for ablation, coagulation and resurfacing of soft tissue in April 2007 and for treatment of wrinkles, pigmentation, textural irregularities and vascular dyschromia in November 2007. We received FDA clearance for two additional Fraxel re:pair hand pieces in July 2008, which deliver ablative and incisional treatments for surgical applications. In October 2009, we received FDA clearance to market the Fraxel DUAL system, which consists of 1550nm and 1927nm wavelength lasers. As of December 31, 2009, we had a global installed base of over 5,000 systems.

On February 26, 2010, we acquired 100% of the common stock of Aesthera Corporation (“Aesthera”), a privately held medical device company, for $4.75 million in shares of our common stock to Aesthera senior debt holders and $501,000 in cash to such holders, certain security holders and certain obligation holders of Aesthera, including advisors and severance recipients. The shares were valued at $1.95 per share. In connection with this transaction, the Company entered into a contingent consideration arrangement which requires payments of up to

$10.75 million in shares of our common stock if certain criteria in relation to revenue recognized on the sale of Aesthera products and collection of certain Aesthera receivables are met during the one year period beginning April 1, 2010.

On December 23, 2008, as described below, we acquired Reliant Technologies, Inc. (“Reliant”), a privately held company, for $25 million in cash, 23.6 million shares of our common stock and assumption of $9.4 million of debt, including a $5 million note payable to Thermage. The acquisition resulted in a combined company with two strong brand names and one of the largest direct U.S. sales forces in the industry. Following the acquisition, we changed our name to Solta Medical, Inc.

Net revenue for the year ended December 31, 2009 increased 74% or $42.1 million, to $98.8 million, from $56.7 million in 2008, mainly from the contribution from the sale of products and services previously marketed by Reliant under the Fraxel brand name. Our business continued to be impacted by the weakness in global economic conditions and tightening of the credit markets, which resulted in a slowdown in customer purchase decisions. As our procedures are generally elective, the slowing economy reduced demand for our procedures. The tight credit markets limited the ability of some of our customers to obtain financing for the purchase of our products. In response to the continuing difficulties in the economy, we have implemented a number of initiatives in response to the tight worldwide credit market, including expanding our partner program to include Fraxel consumables as well as offering incentives to doctors who become both Fraxel and Thermage customers.

Acquisition of Reliant Technologies, Inc.

On December 23, 2008, we acquired 100% of the common stock of Reliant for $25 million in cash and 23.6 million shares of Solta Medical common stock and assumption of $9.4 million of debt, including a $5 million note payable to Thermage. This acquisition expands the market presence of the Company. Complementary product offerings allow us to cross-sell a more complete product line to physicians and their patients through one of the largest direct U.S. sales forces in the industry and an expansive international distribution network.

The acquisition purchase price totaled a combined $25 million cash paid, $61.4 million for 23.6 million shares issued at the $2.60 share price on the date of announcement, $181,000 fair value of assumed warrants and approximately $4.1 million in direct transaction costs.

We recorded an estimate for costs to terminate some activities associated with the Reliant operations. The restructuring accrual of approximately $3.0 million at December 31, 2008 was principally related to the termination of 45 Reliant employees of approximately $1.8 million and restructuring of facilities of $1.2 million.

The valuation of identified intangible assets acquired was based on management’s estimates, currently available information and reasonable and supportable assumptions. The allocation was based on the fair value of these assets determined using the income approach. The income approach, using a discounted cash flow model, was used to determine the estimated fair values of the acquired intangible assets. The Company calculated the present value of the expected future cash flows attributable to the acquired intangibles using an 18% to 22% discount rate. With respect to intangible assets, there are several methods available under the income approach to quantify fair value. Under this approach the Company used the following methods to quantify fair value of the acquired intangibles at the acquisition date. The excess earnings method was used for the following four intangible assets: product technology, customer relationships, royalties intangible and product development contract. The relief from royalties method was used for the core technology and Fraxel trade name intangibles with a royalty rate of 5% and 1%, respectively. The lost profits method (also referred to as the “with and without method”) was used for the non-compete agreement with a probability of competition rate of 10%. The Company utilized third-party market data (i.e. license agreements) to derive valuation assumptions used to fair value certain intangible assets, such as the Fraxel trade name and core technology.

Of the total original purchase price of approximately $90.6 million, approximately $41.1 million was allocated to amortizable intangible assets. Approximately $37.2 million of the amortizable intangible assets are being amortized using a straight-line method over their respective estimated useful lives of two to 12 years.

In conjunction with the acquisition of Reliant, we recorded an expense of approximately $9.1 million for acquired in-process research and development (“IPR&D”) during the quarter and year ended December 31, 2008, because feasibility of the acquired technology had not been established and no alternative future use exists. The IPR&D is related to the development of three new products. The three significant IPR&D projects at date of acquisition were as follows: Project A — a next generation dual wave-length Fraxel re:store system; Project B — a body shaping product; and Project C — a resurfacing product for the professional market being developed in a collaborative partnership. At the date of acquisition, it was estimated that Project A would be completed in 2009, Project B would be completed in 2010 and Project C would be completed in 2011. Project A was completed in September 2009 and FDA clearance was received in October 2009. Project B and C are currently in clinical investigations and commercialization is expected in 2011, at which time cash flows are expected to commence.

We used the income approach (excess earnings method) to determine the estimated fair values of the acquired IPR&D, which uses a discounted cash flow model, based on estimates of successful product development and commercialization to estimate future net cash flows resulting from projected revenues and related costs. These estimates take into account the stages of completion and the risks surrounding successful development and commercialization of the underlying product candidates. We calculated the present value of the expected future cash flows attributable to the in-process technology using a 21% to 23% discount rate for the related projects. The after tax cash flows are calculated by applying cost, expense, income tax and contributory asset charge assumptions to the IPR&D revenue streams.

The major risks and uncertainties associated with the timely and successful completion of these IPR&D projects include delays caused by legal actions brought by our competitors and the timing of the receipt of necessary regulatory approvals. No assurances can be given that the underlying assumptions used to prepare the discounted cash flow analysis will not change or the timely completion of each project to commercial success will occur. For these and other reasons, actual results may vary significantly from estimated results.

We allocated the residual value of approximately $48.2 million to goodwill at December 23, 2008, and adjusted this amount to $47.3 million during the year ended December 31, 2009 for adjustments to the valuation of inventory acquired, accrued restructuring, prepaid expenses, and adjustments of the acquisition consideration for a shortfall in Reliant’s closing working capital.

Goodwill represents the excess of the purchase price over the fair value of the net tangible and intangible assets acquired. Goodwill is not amortized, but is tested for impairment on an annual basis or when events and circumstances indicate that the carrying amount of goodwill may not be recoverable. The factors that contributed to a premium on the purchase price that resulted in the recognition of goodwill were:

•

The expansion of our recurring revenue model allowing for increased treatment tip usage as well as expanding clinical applications for our physician customers.

•

Access to an expanded base of industry knowledge and expertise.

•

Opportunity to complement our existing products for the aesthetic market with a synergistic technology and new clinical treatment applications.

•

Expansion of our global presence thereby increasing our market penetration.

The Company performed a goodwill impairment test at the end of 2009 and as a result, no goodwill impairment was identified through December 31, 2009. The test was based on our single operating segment and reporting unit structure.

Significant Business Trends

We derive revenue primarily from the sale of systems, treatment tips and consumables. For the years ended December 31, 2009, 2008 and 2007 we derived 48%, 73% and 71% respectively, of our revenue from treatment tips and consumable sales, and 43%, 24% and 26% respectively, of our revenue from system sales. The balance of our revenue is derived from service, research and development and shipping. During 2007, we launched four new procedures and associated treatment tips, including the premium STC tip for skin tightening and contouring, and the DC tip for deep contouring and body shaping. In March 2008, we introduced the cellulite tip. During 2009, we launched two new systems, the Thermage CPT and Fraxel re:store Dual.

With the acquisition of Reliant, we have seen sales of treatment tips and consumables decrease as a percentage of Solta revenue versus system sales, and revenue derived from sales of products and services within the United States decrease as a percentage of total Solta revenue. During the second quarter of 2009, we announced the termination of the upgrade program for our first generation Thermage and Fraxel systems to the current versions of these systems. As a result, we experienced a high volume of system upgrade sales, which contributed to the increase in the proportion of revenue from system sales.

We market our products in the United States to physicians, primarily dermatologists and plastic surgeons, through a direct sales force and internationally in over 100 countries through a network of independent distributors and direct sales force in certain countries. In the years ended December 31, 2009, 2008 and 2007 we derived 46%, 52% and 52%, respectively, of our revenue from sales of our products and services within the United States, and 54%, 48% and 48%, respectively, of our total sales outside of the United States. We believe that a significant portion of our business will continue to come from international sales through increased penetration in countries where we currently sell our products, combined with expansion into new international markets. The percentages of our revenue by region are presented in the table below:


	Years Ended December 31,
	2009		2008		2007
United States	46	%	52	%	52	%
Asia Pacific	25	%	24	%	21	%
Europe/Middle East	23	%	14	%	17	%
Rest of the world	6	%	10	%	10	%

Total net revenue	100	%	100	%	100	%

We continue to believe our bifurcated sales force will serve us well. With the acquisition of Reliant, we have one of the largest direct U.S. sales forces in the industry, with about half of the sales force focusing on existing customers and sales of treatment tips, upgrades and training, and the remainder focusing on securing new accounts.

Future operating results are difficult to predict accurately. We anticipate that our quarterly results of operations may fluctuate for the foreseeable future due to several factors, including prevailing economic conditions and our customers’ access to the credit market, the timing of introduction and the degree of acceptance of future product offerings, unanticipated interruptions and expenses related to our manufacturing operations, and the performance of our direct sales force and international distributors. The tight credit markets limited the ability of some of our customers to obtain financing for the purchase of our products. In response to the continuing difficulties in the economy, we have implemented a number of initiatives in response to the tight worldwide credit market, including expanding our partner program to include Fraxel consumables as well as offering incentives to doctors who become both Fraxel and Thermage customers.

We introduced two new products during the second half of 2009, the commercial success of which will depend upon the acceptance of these products by physicians and their patients. As new or enhanced products are introduced, we must successfully manage the transition from older products in order to minimize disruption in customers’ ordering patterns, avoid excessive levels of older product inventories, and ensure that enough supplies of new products can be delivered to meet customer demand.

Significant Industry Factors

The growth of our business relies on current economic conditions and their impact on the growth of the industry, our ability to continue to develop new products, applications and innovative technologies, obtain and maintain regulatory clearances for our products, protect our proprietary technology, and successfully market and distribute our products. Our industry is characterized by seasonally lower demand during the third calendar quarter of the year, when both physicians and prospective patients take summer vacations. Additionally, our industry is highly competitive and our success depends on our ability to compete successfully. Our business is sensitive to a number of factors that influence the levels of consumer spending, including political and economic conditions such as recessionary environments, the level of disposable consumer income, consumer debt, interest rates and consumer confidence. Declines in consumer spending on aesthetic procedures could have an adverse effect on our operating results. A detailed discussion of these and other factors that impact our business is provided in the “Risk Factors” section in this Annual Report on Form 10-K.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations is based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of financial statements requires management to make estimates and judgments that affect the reported amounts of assets and liabilities, revenue and expenses, and disclosures at the date of the financial statements. On a periodic basis, we evaluate our estimates, including those described below. We use authoritative pronouncements, historical experience and other assumptions as the basis for making estimates. Actual results could differ from those estimates.

We believe that the following critical accounting policies are affected by our more significant judgments and estimates used in the preparation of our financial statements.

Revenue Recognition

Product revenue is recognized when title and risk of ownership have been transferred, provided that persuasive evidence of an arrangement exists, the price is fixed or determinable, remaining obligations are insignificant and collectability is reasonably assured. Transfer of title and risk of ownership typically occur when the product is shipped to the customer. Revenue is recorded net of customer and distributor discounts. Revenue from the sale of extended service contracts for products beyond their warranty term is recognized on a straight-line basis over the period of the applicable extended contract. We also earn service revenue from customers outside of their warranty term or extended service contracts. Such service revenue is recognized as the services are provided.

Our system sales in the United States typically have post-sale obligations of installation and training. These obligations are fulfilled after product shipment. When we have objective and reliable evidence of fair value of the undelivered elements, we defer revenue attributable to the post-shipment obligations and recognize such revenue when the obligation is fulfilled. Otherwise, we will defer all revenue until all elements are delivered.

We sell to end-users in the United States and primarily to distributors outside of the United States. Sales to end-users and distributors do not include return rights. We typically recognize revenues upon shipment for sales to our independent third party distributors as we have no continuing obligations subsequent to shipment, other than replacement parts warranty coverage. The distributors are responsible for all marketing, sales, installation, training and warranty services for our products. We do not provide price protection or stock rotation rights to any of our distributors. In addition, our distributor agreements do not allow the distributors to return or exchange products and the distributors are obligated to pay us for the sale regardless of whether the distributors are able to resell the product. For sales transactions with non-standard extended payment terms or when collectability is not reasonably assured, we recognize revenue upon receipt of cash payment.

Allowance for Doubtful Accounts

Accounts receivable are typically unsecured and derived from revenues earned from customers. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. We estimate appropriate allowances based upon any specific customer collection issues, our history of losses, economic conditions and age of customer balances. Our assessment of the ability of our customers to pay generally includes direct contact with the customer, a review of their financial status, as well as consideration of their payment history with us.

Warranty Reserve

We provide for the estimated cost of product warranties at the time revenue is recognized. As we sell new products to our customers, we must exercise considerable judgment in estimating the expected failure rates. Should actual product failure rates, material usage or service delivery costs differ from our estimates, revisions to the estimated warranty liability would be required. We offered a three year warranty for Thermage systems sold in the United States, one year for Fraxel systems sold worldwide and a one year replacement parts warranty for systems sold to distributors outside of the United States through December 31, 2008. Beginning in January 1, 2009, we offered a one year warranty period for systems sold worldwide. We also provide a warranty for our consumable products.

Inventory Valuation

We state our inventories at the lower of cost or market value, cost being determined on a standard cost basis (which approximates actual cost on a first-in, first-out basis) and market value being determined as the lower of replacement cost or net realizable value. Standard costs are monitored on a monthly basis and updated quarterly and as necessary to reflect changes in raw material costs and labor and overhead rates. Inventory reserves are established when conditions indicate that the selling price could be less than cost due to physical deterioration, usage, obsolescence, reductions in estimated future demand and reductions in selling prices. Inventory reserves are charged to cost of revenue and establish a lower cost basis for the inventory. We balance the need to maintain strategic inventory levels with the risk of obsolescence due to changing technology and customer demand levels. Unfavorable changes in market conditions may result in a need for additional inventory reserves that could adversely impact our gross margins. Conversely, favorable changes in demand could result in higher gross margins.

Impairment of Goodwill

Goodwill represents the excess of the purchase price over the fair value of the net tangible and intangible assets acquired. The Company’s goodwill is not amortized but is tested for impairment on an annual basis or when events and circumstances indicate that the carrying amount of goodwill may not be recoverable. This impairment review involves a two-step process as follows:

Step 1 – The Company compares its fair value to the carrying value including goodwill. If the carrying value including goodwill exceeds its fair value, the Company moves on to step 2. If the fair value exceeds the carrying value, no further work is performed and no impairment charge is necessary. To date, the fair value of the Company has exceeded the carrying value and thus no goodwill impairment change has been recorded.

Step 2 – The Company performs an allocation of the fair value to its identifiable tangible and intangible assets (other than goodwill) and liabilities. This allows the Company to derive an implied fair value of goodwill. The Company then compares the implied fair value of goodwill to the carrying value of goodwill. If the carrying amount of goodwill is greater than the implied fair value of goodwill, an impairment change would be recognized for the excess.

We test goodwill for impairment at least annually or more frequently if events or changes in circumstances indicate that this asset may be impaired. The goodwill test is based on our single operating segment and reporting unit structure. No goodwill impairment was identified through December 31, 2009.

Impairment of Long-Lived Assets

We review long-lived assets, including property and equipment and finite lived intangibles, for impairment whenever events or changes in business circumstances indicate that the carrying amount of the assets may not be fully recoverable. An impairment loss would be recognized when estimated undiscounted future cash flows expected to result from the use of the asset and its eventual disposition is less than its carrying amount. Impairment, if any, is measured as the amount by which the carrying amount of a long-lived asset exceeds its fair value.

Litigation and Claims

From time to time, we are involved in litigation relating to claims arising from the ordinary course of business. We routinely assess the likelihood of any adverse judgments or outcomes related to legal matters and claims, as well as ranges of probable losses. A determination of the amount of the reserves required, if any, for these contingencies is made after thoughtful analysis of each known issue and an analysis of historical experience. We do not believe the final disposition of these matters will have a material adverse effect on the financial statements and future cash flows of the Company. Also, we do not record gain contingencies.

Income Taxes

We make certain estimates and judgments in determining income tax expense for financial statement purposes. These estimates and judgments occur in the calculation of tax credits, benefits and deductions, such as tax benefits from our non-U.S. operations and in the calculation of certain tax assets and liabilities, which arise from differences in the timing of revenue and expense for tax and financial statement purposes.

We record a valuation allowance to reduce our deferred tax assets to an amount that more-likely-than-not will be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of our net recorded amount, an adjustment to the allowance for the deferred tax asset would increase income in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of our net deferred tax asset in the future, an adjustment to the valuation allowance for the deferred tax asset would be charged to income in the period such determination was made.

We believe we have provided adequate reserves for uncertain tax positions for anticipated audit adjustments by U.S. federal, state and local, as well as foreign tax authorities based on our estimate of whether, and the extent to which, additional taxes, interest and penalties may be due. If events occur which indicate payment of these amounts is unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when we determine the accrued liabilities are no longer warranted. If our estimate of tax liabilities proves to be less than the ultimate assessment, a further charge to expense would result.

Valuation of Share-Based Awards

Share-based compensation expense is measured at the grant date based on the value of the award and is recognized as expense over the vesting period. Determining the fair value of option awards at the grant date requires judgment, including estimating the expected term of stock options, the expected volatility of our stock,

expected forfeitures and expected dividends. The computation of the expected volatility assumption used in the Black-Scholes option pricing model for option grants incorporates our historical volatility and volatility of similar public entities in the aesthetics market due to a lack of historical information regarding the volatility of our stock price. When establishing the expected term assumption, we review annual historical employee exercise behavior of option grants with similar vesting periods. In addition, judgment is also required in estimating the amount of share-based awards that are expected to be forfeited. If actual forfeitures differ significantly from these estimates, share-based compensation expense and our results of operations could be materially affected.

Results of Operations

Years Ended December 31, 2009 and December 31, 2008

Net Revenue. Revenue is derived from the sales of systems, treatment tips and other consumables, and service and other revenue. Net revenue was $98.8 million for the year ended December 31, 2009, an increase of $42.1 million, or 74%, compared to $56.7 million for the year ended December 31, 2008. This increase is primarily due to the contribution from Fraxel sales in 2009 resulting from the Reliant acquisition in December 2008. System sales for the year ended December 31, 2009 was $42.5 million, an increase of $29.0 million, or 213%, compared to $13.6 million for the same period in 2008. Sales of treatment tips and other consumables was $47.3 million, an increase of $5.9 million, or 14%, compared to $41.4 million for the same period in 2008. These increases were due to the contributions from Fraxel sales resulting from the Reliant acquisition and an increase in Thermage system upgrades during 2009, partially offset by a decrease in Thermage tip revenue.

Cost of Revenue. Our cost of revenue consists primarily of material, labor and manufacturing overhead expenses. Gross margin was 59% of revenue for the year ended December 31, 2009, compared with 73% of revenue for the same period in 2008. The decrease in gross margin as a percent of revenue for the year ended December 31, 2009 was primarily due to a $2.9 million fair value adjustment to cost of sales resulting from sales of inventory assumed in the Reliant acquisition, $2.8 million of amortization expense from intangible assets from the Reliant acquisition, a higher proportion of lower-margin system and system upgrade sales than higher-margin tip sales primarily resulting from the Reliant acquisition, unfavorable overhead absorption due to lower than planned production volume, and downward sales-pricing pressure caused by the continuing difficulties in the economy,

Sales and Marketing. Sales and marketing expenses consist primarily of personnel costs and costs related to customer-attended workshops and trade shows and advertising, as well as marketing and customer service expenses. Sales and marketing expenses in the year ended December 31, 2009 was $38.9 million, an increase of $11.9 million, or 44%, compared to $27.0 million for the same period in 2008. The increase was primarily attributable to increased headcount and related personnel and travel and entertainment expenses of $5.7 million from the Reliant acquisition, an increase of $3.3 million in discretionary marketing expenses, an increase of $1.4 million in professional services, an increase of $0.8 million in supplies, telecommunication, depreciation and allocated information technology and facility expenses, and $0.7 million of amortization of intangibles acquired in the Reliant acquisition.

Research and Development. Research and development expenses consist primarily of personnel costs, clinical and regulatory costs, material costs and regulatory and quality assurance costs not directly related to the manufacturing of our products. Research and development expenses in the year ended December 31, 2009 was $16.2 million, an increase of $6.7 million, or 71%, compared to $9.5 million for the same period in 2008. Compared to the same period of 2008, employee payroll and related expenses increased $2.8 million which was primarily attributable to the Reliant acquisition, clinical studies and other R&D project costs increased $1.4 million, professional services increased by $1.2 million, allocated information technology and facility expenses, and depreciation and amortization expenses were higher by $1.3 million, including $0.6 million of amortization of intangibles acquired from the Reliant acquisition.

General and Administrative. General and administrative expenses consist primarily of personnel costs, legal and accounting fees, human resources costs and other general operating expenses. General and administrative expenses in the year ended December 31, 2009 was $14.7 million, an increase of $1.0 million, or 7%, compared with $13.7 million for the same period in 2008. The increase from the prior year period was due to an increase of $1.5 million in employee payroll and related expenses, and an increase of $0.9 million in professional fees primarily due to increased outside accounting, tax and legal fees; partially offset by $1.4 million in merger related expenses incurred in 2008. During the first quarter of 2008, we reached an advanced stage of negotiations with a potential acquisition target and had performed significant due diligence on the project before negotiations were terminated. The $1.0 million in outside advisory fees incurred in the first quarter of 2008 in pursuing this acquisition did not recur in 2009.

Interest and Other Income. Interest and other income consist primarily of interest income generated from our cash, cash equivalents and marketable investments. Interest and other income decreased $1.9 million, or 80%, from $2.3 million for the year ended December 31, 2008 to $0.5 million for the same period in 2009, due to lower average cash and investment balances following our use of cash in the Reliant acquisition.

Interest and Other Expense. Interest and other expense consist primarily of interest expense resulting from borrowings on the margin account, line of credit and term loan during 2009, none of which existed in 2008. Interest and other expenses were $394,000 and $15,000 in the years ended December 31, 2009 and 2008, respectively.

Gain (Loss) on Investments. During the year ended December 31, 2009, we realized $0.2 million in gains on investments that had either been sold or matured in our portfolio during the 2009. During 2008, we deemed certain declines in the fair market value of our “available-for-sale” marketable securities to be other than temporary and as a result, recorded a $1.1 million loss in the year ended December 31, 2008. Of the $1.1 million loss recorded during the year, approximately $0.9 million was related to a single security in our investment portfolio.

Provision (benefit) for Income Taxes. There was an income tax provision of $14,000 and a tax benefit of $99,000 for the years ended December 31, 2008 and 2009, respectively. The provision for income taxes for the year ended December 31, 2008 primarily represented additions to AMT taxes and additions to reserves for uncertain tax positions, while the benefit for income taxes for the year ended December 31, 2009 primarily represented refunds of income taxes, partially offset by additions to reserves for uncertain tax positions. We did not recognize any tax benefits in relation to the loss before income taxes for the year ended December 31, 2009 as we maintained a full valuation allowance for deferred taxes.

Years Ended December 31, 2008 and December 31, 2007

Effect of acquisition of Reliant Technologies, Inc. Our results of operations in the year ended December 31, 2008 included the effect of the acquisition of Reliant on December 23, 2008 and the results of operations of Reliant from December 23, 2008 to December 31, 2008.

Net Revenue. Revenue is derived from the sales of systems, treatment tips and other consumables and service and other revenue. Net revenue was $56.7 million for the year ended December 31, 2008, a decrease of $6.4 million, or 10%, compared to $63.1 million for the same period in 2007. The decrease in sales in 2008 from 2007 was primarily due to a comparative weakening of global economic conditions, and tightening of the credit market that resulted in a slowdown of customer purchasing decisions during the second half of 2008. Sales of treatment tips and other consumables was $41.4 million for the year ended December 31, 2008, a decrease of $3.7 million, or 8%, compared to $45.1 million for the same period in 2007. The decrease in treatment tips and consumables revenue was due primarily to a decrease in units sold, partially offset by an increase in average selling price of tips, driven by sales of premium tips. Sales of premium tips such as the STC tip for skin tightening and contouring, the DC tip for deep contouring and body shaping and the CL tip for Cellulite represented approximately 63% of total sales of treatment tips and consumables during the year ended

December 31, 2008. System revenue was $13.6 million, a decrease of $2.7 million, or 17%, compared to $16.3 million for the same period in 2007. The decrease in systems revenue was primarily due to a decrease in units sold as a result of the factors above, which was partially offset by an increase in average selling price.

Cost of Revenue. Our cost of revenue consists primarily of material, labor and manufacturing overhead expenses. Gross margin was 73.4% in the year ended December 31, 2008, compared with 74.7% for the same period in 2007. During 2008, gross margins were favorably impacted by higher average selling price of treatment tips and higher sales mix towards the higher margin treatment tip products. These favorable variances, however, were offset by lower production volumes, provision for obsolete and excess inventories and loss on disposal of service inventories.

Sales and Marketing. Sales and marketing expenses consist primarily of personnel costs and costs related to customer-attended workshops and trade shows and advertising, as well as marketing and customer service expenses. Sales and marketing expenses for the year ended December 31, 2008 was $27.0 million, an increase of $0.8 million, or 3%, compared to $26.2 million for the same period in 2007. The increase was primarily attributable to increased headcount and related personnel and travel and entertainment expenses of $1.3 million, a result of our expansion of the U.S. sales force, $0.6 million in severance expenses related to our restructuring after the acquisition of Reliant, which was partially offset by lower discretionary marketing expenses of $0.8 million and lower stock-based compensation expenses of $0.3 million.

Research and Development. Research and development expenses consist primarily of personnel costs, clinical and regulatory costs, material costs and regulatory and quality assurance costs not directly related to the manufacturing of our products. Research and development expenses for the year ended December 31, 2008 was $9.5 million, an increase of $0.4 million, or 4%, compared to $9.1 million for the same period in 2007. The increase was primarily related to increased headcount and related personnel and infrastructure expenses of $0.4 million; severance and write off of assets of $0.4 million, and higher spending on clinical studies and other R&D project costs of $0.1 million, which were partially offset by a decrease of $0.5 million in stock-based compensation charges.

General and Administrative. General and administrative expenses consist primarily of personnel costs, legal and accounting fees, information technology costs, human resources costs and other general operating expenses. General and administrative expenses for the year ended December 31, 2008 was $13.7 million, an increase of $2.4 million, or 21%, compared to $11.3 million for the same period in 2007. During the first quarter of 2008, we reached an advanced stage of negotiations with a potential acquisition target and had performed significant due diligence on the project before negotiations were terminated. We incurred approximately $1.0 million in outside advisory fees pursuing this acquisition. The remaining increase from 2007 was due to an increase of $0.6 million in legal fees related to patent litigation and new patent filings and $0.5 million in professional fees associated with compliance, bad debt expenses of $0.1 million and severance expenses of $0.1 million.

Acquired in-process research and development. In conjunction with the acquisition of Reliant, we recorded an expense of $9.1 million for acquired in-process research and development during the year ended December 31, 2008 because feasibility of the acquired technology had not been established and no alternative future use exists.

Severance Expenses. As a result of the acquisition of Reliant, the Company recorded $1.0 million related to severance expenses for 23 former Thermage employees for the year ended December 31, 2008. The severance expenses were included in the results of operations in the following report captions: cost of sales $0.1 million; research and development expenses $0.3 million; sales and marketing expenses $0.6 million.

Interest and Other Income. Interest and other income consist primarily of interest income generated from our cash, cash equivalent and marketable investments. Interest and other income decreased $0.2 million, or 7%, to $2.3 million from $2.5 million for the years ended December 31, 2008 and 2007, respectively.

Loss on Investments. During 2008, we deemed certain declines in the fair market value of our “available-for-sale” marketable securities to be other than temporary and as a result, recorded those losses in the results of operations. Of the $1.1 million loss recorded during the year, approximately $0.9 million was related to a single security in our investment portfolio.

Provision for Income Taxes. Provision for income taxes for the year ended December 31, 2008 was $14,000, compared with $271,000 provision for income taxes in 2007. The provision for income taxes for both periods represented alternative minimum taxes and additions to ASC 740 reserves.

Stock-Based Compensation

For the years ended December 31, 2007 and 2008 and 2009, employee and non-employee stock-based compensation expense were allocated as follows (in thousands):


	Years Ended December 31,
	2009		2008		2007
Cost of revenue	$	241	$	190	$	288
Sales and marketing		1,244		1,449		1,796
Research and development		273		385		903
General and administrative		1,486		1,655		1,811

Total stock-based compensation expense	$	3,244	$	3,679	$	4,798

At December 31, 2009, the total compensation cost related to stock-based awards granted or modified to employees and directors but not yet recognized was approximately $4.3 million, net of estimated forfeitures. We will amortize this cost on a straight-line basis over the remaining weighted average period of approximately 3.4 years.

Stock-based compensation expense related to stock options granted to non-employees is recognized on a straight-line basis. The options generally vest ratably over four years. The values attributable to these options are amortized over the service period and the unvested portion of these options is remeasured as the services are provided and the options are earned. The stock-based compensation expense will fluctuate as the deemed fair value of the common stock fluctuates. In connection with the grant of stock options to non-employees, we recorded stock-based compensation expense of $1,000, $6,000 and $128,000 for the years ended December 31, 2009 and 2008 and 2007, respectively.

Liquidity and Capital Resources

On December 31, 2009, we had working capital of $14.5 million, which included $14.7 million of cash and cash equivalents.

In the fourth quarter of 2008, in anticipation of the acquisition of Reliant Technologies, Inc., we drew down on funds from a margin account with JP Morgan Chase, collateralized by our marketable investments. Pursuant to the terms of credit offered by JP Morgan Chase, we may borrow up to 75% of the market value of our investment account at an interest rate of the 30-day Libor rate plus 100 basis points. We had no marketable securities as of December 31, 2009, and accordingly, the margin account had a zero balance as of that date.

In March 2009, we entered into a Loan and Security Agreement with Silicon Valley Bank for a $6.0 million secured revolving loan facility and a $3.0 million secured term loan. We drew down $3.8 million on the revolving loan facility and $3.0 million as a term loan in March 2009, and repaid the revolving loan in full in April 2009. On June 30, 2009, we entered into an amendment to the Loan Agreement which provides for an increase of the secured revolving loan facility to $8.0 million and an additional $1.0 million secured term loan. At December 31, 2009, the outstanding balance on the revolving loan facility was $8,000,000. Borrowings under

the revolving loan facility accrue interest at prime plus 1.00% per annum, subject to a minimum of 5.00% per annum. Borrowings under the term loans accrue interest at an effective rate of 6.39% per annum. Interest on borrowings under the revolving loan facility is payable monthly. The term loans are payable in 33 equal monthly payments of principal and interest. The revolving loan facility and term loans subject the Company to certain financial and non-financial covenants and the bank has a first security interest in all of the Company’s assets including intellectual property. We were in compliance with these covenants as of December 31, 2009, except for maintaining the minimum liquidity ratio as required by the Loan Agreement. The Lender issued us a formal waiver of the liquidity covenant violation. We repaid all funds drawn from the revolving loan facility in January 2010.

In connection with the Loan and Security Agreement, the Company’s subsidiary, Reliant Technologies, LLC (“Reliant LLC”), entered into an Unconditional Guaranty, dated as of March 9, 2009 (the “Guaranty”), in favor of Lender, pursuant to which Reliant LLC guaranteed all of the obligations of the Company under the Loan Agreement, and a Security Agreement, dated as of March 9, 2009 (the “Security Agreement”), with Lender, pursuant to which Reliant LLC granted a security interest in substantially all of its personal property to collateralize its obligations under the Guaranty.

Our future capital requirements depend on a number of factors, including the rate of market acceptance of our current and future products, the resources we devote to developing and supporting our products, and continued progress of our research and development of new products.

We expect to increase capital expenditures consistent with our anticipated growth in manufacturing, infrastructure and personnel. We also may increase our capital expenditures as we expand our product lines or invest to address new markets.

In January 2010, the Company entered into securities purchase agreements in connection with a private placement of its securities to certain institutional and other accredited investors pursuant to which the Company agreed to sell and issue (i) an aggregate of 8,529,704 newly issued shares of its common stock, par value $0.001 per share and (ii) warrants to purchase an aggregate of 4,264,852 shares of common stock. The sale of securities resulted in aggregate gross proceeds of approximately $17.2 million. The net proceeds, after deducting offering expenses were approximately $15.9 million.

We believe that our current cash and cash equivalent balances and cash generated from operations, along with the credit facilities made available to us in 2009, will meet our anticipated cash needs for working capital and capital expenditures for at least the next 12 months. Our future liquidity requirements may increase beyond currently expected levels if we fail to maintain compliance with such covenants or if unanticipated expenses or other uses of our cash arise. In order to meet our future liquidity needs, we may become reliant on additional equity and/or debt financing. Such additional financing may not be available on a timely basis on terms acceptable to us, or at all, particularly in the short-term due to the current credit and equity market funding environments. Any future equity financing would result in substantial dilution to our stockholders. The availability of financing or merger opportunities will depend, in part, on market conditions, and the outlook for our company.

Contractual Obligations

The following table discloses aggregate information about our contractual obligations and the periods in which payments are due as of December 31, 2009 (in thousands):


	Payments Due by Period
	Total		Less than 1 Year		1-3 Years
Term loans	$	3,058	$	1,432	$	1,626
Operating leases	$	3,683	$	1,114	$	2,569

Total contractual obligations	$	6,741	$	2,546	$	4,195

Cash Flows for the Years Ended December 31, 2009, December 31, 2008 and December 31, 2007

Net Cash Provided by (Used in) Operating Activities. Net cash used in operating activities was $6.8 million in the year ended December 31, 2009, compared to net cash of $1.9 million used in operating activities in the prior year ended December 31, 2008. Net cash provided by operating activities was $5.9 million for the year ended December 31, 2007. During the year ended December 31, 2009, cash was used to fund an increase of $7.6 million in accounts receivable that was primarily due to increased revenue and a higher percentage of sales late in the period, a decrease of $2.5 million in accrued and other liabilities, a $1.4 million decrease in accounts payable, and a $0.7 million increase in prepaid expenses and other current assets. These were partially offset by cash used due to a decrease of $3.7 million in accrued restructuring, $2.9 million of cash provided by a decrease in inventory and $0.2 million net cash provided from net loss after adjusting for non-cash items. The decrease in inventory during 2009 was primarily due to sales during the period supplemented by tighter management of inventory purchases. During 2008, cash used for changes in assets and liabilities of $1.8 million was primarily from use of cash from a decrease in accrued and other liabilities of $5.3 million, increase in prepaid expenses and other current assets of $1.7 million and increase in inventories of $0.8 million. This use of cash was partially offset by cash provided from an increase in accrued restructuring of $3.5 million, a decrease in accounts receivable of $1.9 million and an increase in accounts payable of $0.6 million. The decrease in accrued and other liabilities was due to lower payroll and related expenses. The increase in accrued restructuring is primarily due to the termination of employees and restructuring of facilities related to the Reliant acquisition. The increase in prepaid expenses and other current assets was primarily due to an increase of prepaid income taxes and deferred tax assets and an increase in prepayment related to inventory purchases and other prepayments. The increase in inventories was primarily due to lower than anticipated sales in the fourth quarter of 2008. Lower accounts receivable balance was primarily due to a decrease in sales during the fourth quarter of 2008. During 2007, $9.0 million net cash was provided from net income after adjusting for non-cash items, which was offset by $3.1 million net cash used in assets and liabilities. Cash was used in the increase of accounts receivable and purchase of inventories in support of actual and anticipated increases in revenue. This was partially offset by cash provided from higher deferred revenue as a result of deferral of revenue on sales of our predecessor generators with rights to upgrade to the new Thermage NXT system.

Net Cash Used in Investing Activities. Net cash provided by investing activities was $15.0 million for the year ended December 31, 2009. Net cash used in investing activities was $13.1 million and $39.5 million for the years ended December 31, 2008 and December 31, 2007, respectively. Our investing activities in 2009 consisted principally of sales and maturities related to our marketable securities of $18.0 million, partially offset by the purchases of property and equipment of $1.8 million and transaction cost payments, net of escrow settlement relating to the Reliant acquisition of $1.1 million. On December 23, 2008, we acquired Reliant Technologies, Inc. We used $25.4 million in cash to acquire the company and to pay transaction costs associated with the acquisition. We provided $5.0 million of debt financing to Reliant prior to the acquisition in accordance with the merger agreement, and also made net payments of $0.5 million of expenses on behalf of Reliant prior to the acquisition. Additionally, capital expenditure in 2008 was $1.6 million, an amount higher than prior years, primarily due to preparation of our facilities for the relocation of Reliant operations from their Mountain View headquarters to our Hayward facilities at the beginning of January 2009, as well as capital expenditures in IT equipment and software to facilitate the integration of the two companies. We used the proceeds from sale of marketable investments to partially fund our acquisition of Reliant. Our investing activities in 2007 consisted principally of property and equipment purchases and activities related to our marketable investments which began in the third quarter of 2007.

Net Cash Provided by Financing Activities. Net cash used in financing activities was $1.0 million for the year ended December 31, 2009. Net cash provided by financing activities was $8.8 million and $1.3 million for the years ended December 31, 2008 and 2007, respectively During 2009, we made net borrowings of $11.1 million in term loans and under the line of credit from Silicon Valley Bank, and repaid $12.4 million on the margin account maintained with JP Morgan Chase related to our marketable investments. In addition there were proceeds from exercise of stock options and employee stock purchase of $0.4 million. In 2008, in addition to

proceeds from exercise of stock options and employee stock purchase plans, cash was also provided by proceeds from a margin account collateralized by our marketable investments. We used cash to pay off several Reliant notes payable subsequent to the acquisition. In 2007, cash provided from financing activities was primarily from proceeds from exercise of stock options and employee stock purchase plans and collection of a note receivable from a stockholder, partially offset by payment of initial public offering costs

Off-Balance Sheet Arrangements

We do not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not have any undisclosed borrowings or debt, and we have not entered into any synthetic leases. We are, therefore, not materially exposed to any financing, liquidity, market or credit risk that could arise if we engaged in such relationships.

Recent Accounting Pronouncements

In December 2007, ASC 805, Business Combinations (“ASC 805”) was revised. This revision changes the accounting for business combinations including the measurement of acquirer shares issued in consideration for a business combination, the recognition of contingent consideration, the accounting for preacquisition gain and loss contingencies, the recognition of capitalized in-process research and development, the accounting for acquisition-related restructuring cost accruals, the treatment of acquisition-related transaction costs and the recognition of changes in the acquirer’s income tax valuation allowance. ASC 805 is effective for fiscal years beginning after December 15, 2008, with early adoption prohibited. Additionally, in February 2009, ASC 805-20-35-3, Accounting for Assets Acquired and Liabilities Assumed in a Business Combination That Arise from Contingencies, amended the provisions related to the initial recognition and measurement, subsequent measurement and disclosure of assets and liabilities arising from contingencies in a business combination under ASC 805. The Company adopted ASC 805-20-35-3 on January 1, 2009 and will apply this new accounting standard for future business combinations.

In December 2007, ASC 810-10-65-1, Non-controlling Interests in Consolidated Financial Statements, was amended. This amendment changes the accounting for non-controlling (minority) interests in consolidated financial statements including the requirements to classify non-controlling interests as a component of consolidated stockholders’ equity, and the elimination of “minority interest” accounting in results of operations with earnings attributable to non-controlling interests reported as part of consolidated earnings. Additionally, ASC 810-10-65-1 revises the accounting for both increases and decreases in a parent’s controlling ownership interest. ASC 810-10-65-1 is effective for fiscal years beginning after December 15, 2008, with early adoption prohibited. The Company’s adoption of ASC 810-10-65-1 on January 1, 2009 did not have a material impact on the Company’s financial position, results of operations or cash flows.

In February 2008, ASC 820-10-15-1A was amended, which delayed the effective date of ASC 820, Fair Value Measurements and Disclosures, for all non-financial assets and non-financial liabilities, except for items that are recognized or disclosed at fair value in the financial statements on a recurring basis (at least annually), until the beginning of the first quarter of fiscal year 2009. The Company’s adoption of 820-10-15-1A on January 1, 2009 did not have a material impact on the Company’s financial position, results of operations or cash flows.

350 and the period of expected cash flows used to measure the fair value of an asset under ASC 805. ASC 350-30-65-1 also requires enhanced disclosures when an intangible asset’s expected future cash flows are affected by an entity’s intent and/or ability to renew or extend the arrangement. ASC 350-30-65-1 is effective for financial statements issued for fiscal years beginning after December 15, 2008 and is applied prospectively. Early adoption is prohibited. The Company’s adoption of ASC 350-30-65-1 on January 1, 2009 did not have a material impact on the Company’s financial position, results of operations or cash flows.

In June 2008, ASC 815-10-65-3, Determining Whether an Instrument (or Embedded Feature) is Indexed to an Entity’s Own Stock, provides guidance for determining whether an equity-linked financial instrument (or embedded feature) is indexed to an entity’s own stock, which would qualify as a scope exception under ASC 815-10-15-74(a), Accounting for Derivative Instruments and Hedging Activities. ASC 815 is effective for fiscal years beginning after December 15, 2008 and early adoption for an existing instrument is not permitted. The Company’s adoption of ASC 815 on January 1, 2009 did not have a material impact on the Company’s financial position, results of operations or cash flows.

In April 2009, ASC 820-10-65-4, Determining Fair Value When the Volume and Level of Activity for the Asset or Liability Have Significantly Decreased and Identifying Transactions That Are Not Orderly, provided additional guidance for estimating fair value in accordance with ASC 820, Fair Value Measurements and Disclosures, when the volume and level of activity for the asset or liability have significantly decreased. This ASC also includes guidance on identifying circumstances that indicate a transaction is not orderly. This ASC emphasizes that even if there has been a significant decrease in the volume and level of activity for the asset or liability and regardless of the valuation technique(s) used, the objective of a fair value measurement remains the same. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction (that is, not a forced liquidation or distressed sale) between market participants at the measurement date under current market conditions. ASC 820-10-65-4 is effective for interim and annual reporting periods ending after June 15, 2009, and is applied prospectively. Accordingly, the Company adopted the provisions of ASC 820-10-65-4 on April 1, 2009. The adoption of this guidance did not have a material impact on the Company’s financial position, results of operations or cash flows.

In April 2009, ASC 825-10-65-1, Interim Disclosures about Fair Value of Financial Instruments, was revised to require disclosures about fair value of financial instruments in interim as well as annual financial statements. This standard is effective for periods ending after June 15, 2009. Accordingly, the Company adopted the provisions of ASC 825-10-65-1 on April 1, 2009. The adoption of this guidance did not have a material impact on the Company’s financial position, results of operations or cash flows. However, the provisions of ASC 825-10-65-1 result in additional disclosures with respect to the fair value of the Company’s financial instruments.

In June 2009, ASC 105, Generally Accepted Accounting Principles, was issued. ASC 105 relates to the Financial Accounting Standards Board (FASB) Accounting Standards Codification (Codification), which organizes thousands of U.S. GAAP pronouncements under approximately 90 accounting topic areas. The ASC states that the Codification will become the single source for all authoritative GAAP recognized by the ASC to be applied for financial statements issued for periods ending after September 15, 2009. The Codification does not change GAAP and did not have an affect on the Company’s financial position, results of operations or cash flows.

In October 2009, the FASB issued Accounting Standards Update (ASU), 2009-13, Revenue Recognition (“Topic 605”): Multiple Deliverable Revenue Arrangements — A Consensus of the FASB Emerging Issues Task Force. This update provides application guidance on whether multiple deliverables exist, how the deliverables should be separated and how the consideration should be allocated to one or more units of accounting. This update establishes a selling price hierarchy for determining the selling price of a deliverable. The selling price used for each deliverable will be based on vendor-specific objective evidence, if available, third-party evidence if vendor-specific objective evidence is not available, or estimated selling price if neither vendor-specific or third-party evidence is available. The Company will be required to apply this guidance prospectively for revenue

arrangements entered into or materially modified after January 1, 2011; however, earlier application is permitted, as early as interim periods ended September 30, 2009. The Company has not determined the impact that this update may have on its financial statements.

In January 2010, the FASB issued ASU, 2010-06, Fair Value Measurement and Disclosures (“Topic 820”), which relates to the disclosure requirements for fair value measurements and provides clarification for existing disclosures requirements. More specifically, this update will require (a) an entity to disclose separately the amounts of significant transfers in and out of Levels 1 and 2 fair value measurements and to describe the reasons for the transfers; and (b) information about purchases, sales, issuances and settlements to be presented separately (i.e. present the activity on a gross basis rather than net) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3 inputs). This guidance clarifies existing disclosure requirements for the level of disaggregation used for classes of assets and liabilities measured at fair value and requires disclosures about the valuation techniques and inputs used to measure fair value for both recurring and nonrecurring fair value measurements using Level 2 and Level 3 inputs. The new disclosures and clarifications of existing disclosure are effective for fiscal years beginning after December 15, 2009, except for the disclosure requirements for related to the purchases, sales, issuances and settlements in the rollforward activity of Level 3 fair value measurements. Those disclosure requirements are effective for fiscal years ending after December 31, 2010. We do not believe the adoption of this guidance will have a material impact to our consolidated financial statements.

Item 7A.

Quantitative and Qualitative Disclosures about Market Risk

Foreign Currency Risk

Currently, most of our sales and purchases are denominated in U.S. dollars, although, future fluctuations in the value of the U.S. dollar may affect the price competitiveness of our products. We do not believe, however, that we currently have significant direct foreign currency exchange rate risk and have not hedged exposures denominated in foreign currencies.

Interest Rate Risk

Changes in interest rates will impact our interest sensitive credit agreement and accordingly may impact interest expense. We have determined that if interest rates were to instantaneously increase (decrease) by 100 basis points, there would be no material impact to interest expense over a year period.

Item 8.

Financial Statements and Supplementary Data

SOLTA MEDICAL, INC.

ANNUAL REPORT ON FORM 10-K

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS


		Page
Report of Deloitte & Touche, LLP, Independent Registered Public Accounting Firm		64
Report of PricewaterhouseCoopers, LLP, Independent Registered Public Accounting Firm		65
Consolidated Balance Sheets		66
Consolidated Statements of Operations		67
Consolidated Statements of Stockholders’ Equity		68
Consolidated Statements of Cash Flows		69
Notes to Consolidated Financial Statements		70

The following Financial Statement Schedule of the Registrant for the years ended December 31, 2009, 2008 and 2007 is filed as part of this Report as required to be included in Item 8 and should be read in conjunction with the Consolidated Financial Statements of the Registrant:


		Page
Schedule II Valuation and Qualifying Accounts		102

All other required schedules are omitted because of the absence of conditions under which they are required or because the required information is given in the Consolidated Financials Statements or the Notes thereto.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Solta Medical, Inc.

We have audited the accompanying consolidated balance sheet of Solta Medical, Inc. and subsidiaries (the “Company”) as of December 31, 2009, and the related consolidated statements of operations, stockholders’ equity, and cash flows for the year then ended. Our audit also included the consolidated financial statement schedule listed in the Index at Item 15(a)2. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and the financial statement schedule based on our audit. The consolidated financial statements of the Company for the years ended December 31, 2008 and 2007 were audited by other auditors whose report was dated March 30, 2009 on those statements.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, such 2009 consolidated financial statements present fairly, in all material respects, the financial position of Solta Medical, Inc. and subsidiaries as of December 31, 2009 and the results of their operations and their cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, present the information set forth therein.

/s/ DELOITTE & TOUCHE LLP

San Francisco, California

March 22, 2010

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Solta Medical, Inc.

In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Solta Medical, Inc. and its subsidiaries at December 31, 2008, and the results of their operations and their cash flows for each of the two years in the period ended December 31, 2008 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the accompanying index presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and financial statement schedule based on our audits. We conducted our audits of these statements in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

/s/ PricewaterhouseCoopers LLP

San Jose, California

March 30, 2009

Solta Medical, Inc.

CONSOLIDATED BALANCE SHEETS


	December 31,
*(in thousands of dollars, except share and per share data)*	2009			2008
ASSETS
Current assets:
Cash and cash equivalents	$	14,744		$	7,556
Marketable investments		—			17,870
Accounts receivable, net of allowance for doubtful accounts in 2009 and 2008 of $397 and $217, respectively		12,381			5,119
Inventories		14,117			18,304
Prepaid expenses and other current assets		4,748			4,074

Total current assets		45,990			52,923
Property and equipment, net		5,613			6,841
Purchased intangible assets, net		36,799			40,999
Goodwill		47,289			48,158
Other assets		458			247

Total assets	$	136,149		$	149,168

LIABILITIES AND STOCKHOLDERS’ EQUITY
Liabilities:
Accounts payable	$	6,065		$	8,080
Accrued liabilities		10,961			11,085
Accrued restructuring		7			3,549
Current portion of deferred revenue		4,534			3,658
Short-term borrowings		9,432			12,399
Customer deposits		529			288

Total current liabilities		31,528			39,059
Deferred revenue, net of current portion		612			688
Term loan, net of current portion		1,626			—
Non-current tax liabilities		1,862			1,464
Other liabilities		284			133

Total liabilities		35,912			41,344

Commitments and contingencies (Note 7)
Stockholders’ equity:
Preferred stock, $0.001 par value:
Authorized: 10,000,000 shares at December 31, 2009 and 2008
Issued and outstanding: none at December 31, 2009 and 2008		—			—
Common stock, $0.001 par value:
Authorized: 100,000,000 shares at December 31, 2009 and 2008
Issued and outstanding: 48,077,028 and 47,758,823 shares at December 31, 2009 and 2008, respectively		48			48
Additional paid-in capital		169,283			165,680
Deferred stock-based compensation		—			(2	)
Accumulated deficit		(69,094	)		(57,902	)

Total stockholders’ equity		100,237			107,824

Total liabilities and stockholders’ equity	$	136,149		$	149,168

The accompanying notes are an integral part of these consolidated financial statements.

Solta Medical, Inc.

CONSOLIDATED STATEMENTS OF OPERATIONS


	Years Ended December 31,
*(in thousands of dollars, except share and per share data)*	2009			2008			2007
Net revenue	$	98,818		$	56,681		$	63,101
Cost of revenue		40,565			15,066			15,976

Gross margin		58,253			41,615			47,125

Operating expenses
Sales and marketing		38,931			27,001			26,195
Research and development		16,246			9,502			9,099
General and administrative		14,659			13,662			11,300
Acquired in-process research and development		—			9,060			—

Total operating expenses		69,836			59,225			46,594

Income (loss) from operations		(11,583	)		(17,610	)		531
Interest and other income		462			2,334			2,520
Interest and other expenses		(394	)		(15	)		—
Gain (loss) on investments		224			(1,088	)		—

Income (loss) before income taxes		(11,291	)		(16,379	)		3,051
Provision (benefit) for income taxes		(99	)		14			271

Net income (loss)	$	(11,192	)	$	(16,393	)	$	2,780

Net income (loss) per share — basic and diluted:
Net income (loss) per share — basic	$	(0.23	)	$	(0.67	)	$	0.12

Net income (loss) per share — diluted	$	(0.23	)	$	(0.67	)	$	0.11

Weighted average shares outstanding used in calculating net income (loss) per common share:
Basic		47,848,258			24,506,673			23,241,031

Diluted		47,848,258			24,506,673			24,884,458

The accompanying notes are an integral part of these consolidated financial statements.

Solta Medical, Inc.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY


	Common Stock				Additional Paid-In Capital			Deferred Stock-Based Compensation			Notes Receivable from Stockholders			Accumulated Deficit			Accumulated Other Comprehensive Income (Loss)			Total Stockholders’ Equity
*(in thousands of dollars, except share amounts)*	Shares		Amount		Additional Paid-In Capital			Deferred Stock-Based Compensation			Notes Receivable from Stockholders			Accumulated Deficit			Accumulated Other Comprehensive Income (Loss)			Total Stockholders’ Equity
Balances, December 31, 2006	22,906,851		$	23	$	93,418		$	(6	)	$	(125	)	$	(44,189	)	$	—		$	49,121
Exercise of stock options	475,230			1		689			—			—			—			—			690
Amortization of deferred stock-based employee compensation	—			—		—			2			—			—			—			2
Issuance of common stock in settlement of restricted stock units, net of shares withheld for employee taxes	59,999			—		738			—			—			—			—			738
Issuance of common stock under employee stock purchase plan	167,085			—		952			—			—			—			—			952
Charge to retained earnings upon adoption of certain tax law	—			—		—			—			—			(100	)		—			(100	)
Employee stock-based compensation expense, net of estimated forfeitures	—			—		3,658			—			—			—			—			3,658
Repurchase of unvested common stock	(3,750	)		—		(15	)		—			—			—			—			(15	)
Collection of notes and interest receivable	—			—		—			—			125			—			—			125
Nonemployee stock compensation expense	—			—		128			—			—			—			—			128
Tax benefit from exercise of stock options	—			—		20			—			—			—			—			20
Components of comprehensive income:
Net income	—			—		—			—			—			2,780			—			2,780
Other comprehensive income	—			—		—			—			—			—			19			19

Total comprehensive income																					2,799

Balances, December 31, 2007	23,605,415			24		99,588			(4	)		—			(41,509	)		19			58,118
Issuance of common stock for Reliant acquisition, net of issuance costs	23,599,762			24		61,383			—			—			—			—			61,407
Assumption of warrants upon Reliant acquisition	—			—		181			—			—			—			—			181
Exercise of stock options	391,551			—		536			—			—			—			—			536
Amortization of deferred stock-based employee compensation	—			—		—			2			—			—			—			2
Issuance of common stock in settlement of restricted stock units, net of shares withheld for employee taxes	5,005			—		—			—			—			—			—			—
Issuance of common stock under employee stock purchase plan	157,090			—		323			—			—			—			—			323
Employee stock-based compensation expense, net of estimated forfeitures	—			—		3,663			—			—			—			—			3,663
Nonemployee stock compensation expense	—			—		6			—			—			—			—			6
Components of comprehensive loss:
Net loss	—			—		—			—			—			(16,393	)		—			(16,393	)
Other comprehensive loss	—			—		—			—			—			—			(19	)		(19	)

Total comprehensive loss																					(16,412	)

Balances, December 31, 2008	47,758,823			48		165,680			(2	)		—			(57,902	)		—			107,824
Exercise of stock options	78,497			—		115			—			—			—			—			115
Amortization of deferred stock-based employee compensation	—			—		—			2			—			—			—			2
Issuance of common stock under employee stock purchase plan	239,708			—		246			—			—			—			—			246
Employee stock-based compensation expense, net of estimated forfeitures	—			—		3,241			—			—			—			—			3,241
Nonemployee stock compensation expense	—			—		1			—			—			—			—			1
Net loss	—			—		—			—			—			(11,192	)		—			(11,192	)

Balances, December 31, 2009	48,077,028		$	48	$	169,283		$	—		$	—		$	(69,094	)	$	—		$	100,237

The accompanying notes are an integral part of these consolidated financial statements.

Solta Medical, Inc.

CONSOLIDATED STATEMENTS OF CASH FLOWS


	Years Ended December 31,
(*in thousands of dollars)*	2009			2008			2007
Cash flows from operating activities
Net income (loss)	$	(11,192	)	$	(16,393	)	$	2,780
Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities:
Depreciation and amortization		6,909			1,496			1,386
Amortization of premium (discount) on marketable investments		106			275			(55	)
Realized loss (gain) on marketable securities		(224	)		1,088			—
Write-off of acquired in-process research and development		—			9,060			—
Loss on disposal of property, plant and equipment		57			376			56
Stock-based compensation		3,244			3,679			4,798
Tax expense from stock option exercises		—			—			20
Provision for doubtful accounts		362			135			51
Provision for excess and obsolete inventory		961			233			9
Change in assets and liabilities
Accounts receivable		(7,624	)		1,904			(1,575	)
Inventories		2,852			(789	)		(1,844	)
Prepaid expenses and other current assets		(703	)		(1,717	)		(65	)
Other assets		(211	)		10			(39	)
Accounts payable		(1,432	)		587			(57	)
Accrued and other liabilities		2,476			(5,293	)		237
Accrued restructuring		(3,691	)		3,549			—
Deferred revenue		800			(80	)		278
Customer deposits		241			(24	)		(44	)
Deferred rent		224			53			(8	)

Net cash provided by (used in) operating activities		(6,845	)		(1,851	)		5,928

Cash flows from investing activities
Acquisition of property and equipment		(1,832	)		(1,582	)		(903	)
Payments for acquisition, net of cash acquired and escrow settlement		(1,139	)		(25,388	)		—
Pre-acquisition debt financing provided to Reliant		—			(5,000	)		—
Pre-acquisition payment of expenses on behalf of Reliant, net		—			(548	)		—
Purchase of marketable investments		—			(8,567	)		(60,383	)
Proceeds from sale of marketable investments		17,990			28,022			21,750

Net cash provided by (used in) investing activities		15,019			(13,063	)		(39,536	)

Cash flows from financing activities
Repayment of equipment leases		(6	)		(1	)		—
Repayment of loan agreement borrowings		(15,917	)		(4,437	)		—
Repayment of short-term margin account borrowings		(12,399	)		(2,201	)		—
Collection of notes receivable from stockholders		—			—			125
Proceeds from exercise of stock options		115			536			690
Repurchase of unvested common stock		—			—			(15	)
Proceeds from employee stock purchase plan		246			323			952
Proceeds from loan agreement borrowings		26,975			14,600			—
Proceeds from IPO, net of capitalized IPO related costs		—			—			(409	)

Net cash provided (used) by financing activities		(986	)		8,820			1,343

Net increase (decrease) in cash and cash equivalents		7,188			(6,094	)		(32,265	)
Cash and cash equivalents at beginning of year		7,556			13,650			45,915

Cash and cash equivalents at end of year	$	14,744		$	7,556		$	13,650

Supplemental disclosure of cash flow information
Cash paid for interest	$	294		$	15		$	—
Cash paid for taxes		277			87			161
Supplemental disclosure of non-cash investing and financing activities
Issuance of common stock for acquisition		—			61,407			—
Assumption of warrants to purchase common stock upon acquisition		—			181			—
Interest on note receivable		—			335			—
Accounts payable and accrued liabilities related to property, plant and equipment purchases		109			584			92

The accompanying notes are an integral part of these consolidated financial statements.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands of dollars, except share and per share amounts)

NOTE 1 — THE COMPANY

Background

Solta Medical, Inc. (the “Company”) develops, manufactures, and markets aesthetic energy devices to address aging skin. The Company was incorporated in California on January 11, 1996 as Thermage, Inc. and reincorporated in Delaware on September 10, 2001. The Company commercially launched its first products in October 2002. Following the acquisition of Reliant Technologies, Inc. on December 23, 2008 (see note 3), the Company changed its name to Solta Medical, Inc.

Initial Public Offering

On November 9, 2006, the Company completed an initial public offering (“IPO”) of 6,000,000 shares of its common stock at $7.00 per share. Additionally, on December 8, 2006, the underwriters partially exercised their over-allotment option and purchased 150,000 shares at $7.00 per share. The Company raised approximately $38.3 million, net of underwriting discounts, commissions and other offering costs. Upon the closing of the offering, all the Company’s outstanding shares of redeemable convertible preferred stock converted on a one-to-one basis into 12,406,134 shares of common stock.

Liquidity

The Company’s future liquidity requirements may increase beyond currently expected levels if it fails to achieve sustained profitability or if unanticipated expenses or other uses of its cash arise. In order to meet its liquidity needs, the Company may be required to seek additional equity and/or debt financing. Additional financing may not be available on a timely basis on terms acceptable to the Company, particularly in the short-term due to the current credit and equity market funding environments. If adequate funds are not available, the Company may have to delay development of new products or reduce marketing, customer support or other resources devoted to its products. Any of these factors could harm the Company’s business and financial condition.

In January 2010, the Company entered into securities purchase agreements in connection with a private placement of its securities to certain institutional and other accredited investors pursuant to which the Company agreed to sell and issue (i) an aggregate of 8,529,704 newly issued shares of its common stock, par value $0.001 per share and (ii) warrants to purchase an aggregate of 4,264,852 shares of common stock. The sale of securities resulted in aggregate gross proceeds of approximately $17,230. The net proceeds, after deducting offering expenses were approximately $15,911 (see note 14).

NOTE 2 — SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of the Company and its subsidiaries, which are wholly owned. All intercompany balances and transactions have been eliminated.

Use of Estimates

The preparation of the accompanying financial statements in conformity with accounting principles generally accepted in the United States requires management to make certain estimates and assumptions that

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Cash and Cash Equivalents and Marketable Investments

The Company considers all highly liquid investments with an original maturity of three months or less at the time of purchase to be cash equivalents. Marketable investments are carried at fair value and consist of corporate debt securities and certificates of deposits which are accounted for as “available-for-sale” securities held for use in current operations and are classified in current assets as “Marketable Investments”. Available-for-sale securities with maturities less than twelve months are classified as short term as they represent investments that are available for use in current operations.

Realized gains and losses on marketable investments are included in earnings and are determined using the specific identification method. Unrealized holding gains and losses on marketable investments classified as available-for -sale are excluded from earnings and reported in accumulated other comprehensive income, net of related tax effects, unless the unrealized holding losses are deemed to be other than temporary, in which case they are realized and included in earnings. The amortized cost of debt securities is adjusted for amortization of premium and accretion of discounts to maturity. Such amortization and accretion is included in interest income.

Determining whether the decline in fair value of marketable investments is other than temporary requires management judgment based on the specific facts and circumstances of each investment. For investments in debt securities, these judgments primarily consider: the financial condition and liquidity of the issuer, the issuer’s credit rating, and any specific events that may cause management to believe that the debt securities will not mature and be paid in full; and the Company’s ability and intent to hold the investment to maturity.

Fair Value of Financial Instruments

Carrying amounts of the Company’s financial instruments, including cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities, approximate their fair values due to their short maturities and marketable investments are carried at fair value. Based on the borrowing rates available to the Company for loans with similar terms, the carrying value of the borrowings approximates their fair value. The carrying amounts of restricted cash, other liabilities and other assets approximate their fair values based upon their nature and size.

Concentration of Credit Risk and Other Risks and Uncertainties

Financial instruments that potentially subject the Company to concentrations of risk consist principally of cash and cash equivalents, marketable investments and accounts receivable. The Company’s cash and cash equivalents are primarily invested in deposits, certificates of deposit and money market accounts with two major banking institutions in the United States. Deposits in these institutions may exceed the amount of insurance provided on such deposits, if any. Management believes that these financial institutions are financially sound and, accordingly, minimal credit risk exists. The Company has not experienced any losses on its deposits of cash and cash equivalents.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

The Company invests in debt instruments and commercial paper of U.S. and foreign corporate issuers, as well as in certificates of deposit. To minimize the exposure due to adverse shifts in interest rates, the Company maintains the majority of its investments at a weighted average maturity of one year or less.

Concentration of credit risk with respect to trade accounts receivable is considered to be limited due to the diversity of the Company’s customer base and geographic sales areas. The Company performs ongoing credit evaluations of its customers and maintains reserves for potential credit losses.

One customer accounted for approximately 16% of accounts receivable as of December 31, 2009 and another customer accounted for approximately 12% of accounts receivable as of December 31, 2008. No customers accounted for more than 10% of net revenues for the years ended December 31, 2009, 2008 and 2007.

The Company is subject to risks common to companies in the medical device industry including, but not limited to, new technological innovations, dependence on key personnel, dependence on key suppliers, protection of proprietary technology, product liability and compliance with government regulations. To achieve sustained profitable operations, the Company must successfully design, develop, manufacture and market its products. There can be no assurance that current products will continue to be accepted in the marketplace. Nor can there be any assurance that any future products can be developed or manufactured at an acceptable cost and with appropriate performance characteristics, or that such products will be successfully marketed, if at all. These factors could have a material adverse effect on the Company’s future financial results, financial position and cash flows.

Future products developed by the Company may require clearances from the U.S. Food and Drug Administration or other international regulatory agencies prior to commercial sales. There can be no assurance that the Company’s products will continue to meet the necessary regulatory requirements. If the Company was denied such clearances or such clearances were delayed, it may have a materially adverse impact on the Company.

Accounts Receivable

Accounts receivable are typically unsecured and derived from revenues earned from customers. The Company performs ongoing credit evaluations of its customers and maintains an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. We estimate appropriate allowances based upon any specific customer collection issues, our history of losses, economic conditions and age of customer balances. Our assessment of the ability of our customers to pay generally includes direct contact with the customer, a review of their financial status, as well as consideration of their payment history with us.

Segment Information

The Company operates in one business segment, which encompasses the developing, manufacturing and marketing of aesthetic energy devices to address aging skin. Management uses one measurement of profitability and does not segregate its business for internal reporting. All long-lived assets are maintained in the United States. The Chief Operating Decision Maker is the Chairman, President and Chief Executive Officer of the Company.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

The following table summarizes net revenue by product:


	Years Ended December 31,
	2009		2008		2007
Systems	$	42,539	$	13,573	$	16,328
Tips and other consumables		47,293		41,402		45,087

Net revenue from products		89,832		54,975		61,415
Services and other		8,986		1,706		1,686

Total net revenue	$	98,818	$	56,681	$	63,101

The following table summarizes net revenue by geographic region (based on the ship to address on the invoice):


	Years Ended December 31,
	2009		2008		2007
United States	$	45,086	$	29,741	$	32,660
Asia Pacific		24,680		13,444		13,350
Europe/Middle East		23,020		8,026		10,875
Rest of the world		6,032		5,470		6,216

Total net revenue	$	98,818	$	56,681	$	63,101

Inventories

Inventory is stated at the lower of cost or market, cost being determined on a standard cost basis (which approximates actual cost on a first-in, first-out basis) and market being determined as the lower of replacement cost or net realizable value. Lower of cost or market is evaluated by considering obsolescence, excessive levels of inventory, deterioration and other factors.

Property and Equipment

Property and equipment are stated at cost and depreciated on a straight-line basis over the estimated useful lives of the related assets, which is five to seven years for furniture and fixtures, three to five years for machinery and equipment, and three years for software and computers and equipment. Amortization of leasehold improvements is computed using the straight-line method over the shorter of the remaining lease term or the estimated useful life of the related assets, typically five years. Upon sale or retirement of assets, the costs and related accumulated depreciation and amortization are removed from the balance sheet and the resulting gain or loss is reflected in operations. Maintenance and repairs are charged to operations as incurred.

Goodwill

Step 1 — The Company compares its fair value to the carrying value including goodwill. If the carrying value including goodwill exceeds its fair value, the Company moves on to step 2. If the fair value exceeds the

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

carrying value, no further work is performed and no impairment charge is necessary. To date, the fair value of the Company has exceeded the carrying value and thus no goodwill impairment change has been recorded.

Step 2 — The Company performs an allocation of the fair value to its identifiable tangible and intangible assets (other than goodwill) and liabilities. This allows the Company to derive an implied fair value of goodwill. The Company then compares the implied fair value of goodwill to the carrying value of goodwill. If the carrying amount of goodwill is greater than the implied fair value of goodwill, an impairment change would be recognized for the excess.

No goodwill impairment was identified through December 31, 2009.

Valuation of Long-Lived Assets and Purchased Intangible Assets

The Company reviews long-lived assets, including property and equipment and finite lived intangibles, for impairment whenever events or changes in business circumstances indicate that the carrying amount of the assets may not be fully recoverable. An impairment loss would be recognized when estimated undiscounted future cash flows expected to result from the use of the asset and its eventual disposition is less than its carrying amount. Impairment, if any, is measured as the amount by which the carrying amount of a long-lived asset exceeds its fair value. Through December 31, 2009, there have been no such impairments.

Acquired intangible assets with finite lives are amortized using the straight-line method over their useful lives ranging from two to twelve years. If the acquired intangible asset is not currently generating revenue, amortization is deferred until the acquired intangible asset begins to generate revenue.

Revenue Recognition

Product revenue is recognized when title and risk of ownership has been transferred, provided that persuasive evidence of an arrangement exists, the price is fixed or determinable, remaining obligations are insignificant and collectability is reasonably assured. Transfer of title and risk of ownership typically occurs when the product is shipped to the customer. Revenue is recorded net of customer and distributor discounts. For sales transactions with non-standard extended payment terms, or when collectability is not reasonably assured, the Company recognizes revenue upon receipt of cash payment.

The Company’s system sales in the United States typically have post-sale obligations of installation and training. These obligations are fulfilled after product shipment. When the Company has objective and reliable evidence of fair value of the undelivered elements, it defers revenue attributable to the post-shipment obligations and recognizes such revenue when the obligation is fulfilled. Otherwise, the Company will defer all revenue until all elements are delivered. Since the introduction of the Thermage NXT system in February 2007, the Company continued to sell Thermage TC systems to customers in countries where the Company has not yet obtained approval on the Thermage NXT system. Accordingly, the Company deferred the fair value of the customer’s right to upgrade to the Thermage NXT system until the earlier of final delivery or expiration of such rights. In 2009, such rights expired and the related revenue was recognized.

The Company sells to end-users in the United States and primarily to distributors outside of the United States. Sales to end-users and distributors do not include return rights. The Company typically recognizes revenues upon shipment for sales through independent, third party distributors as the Company has no continuing

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

obligations subsequent to shipment, other than replacement parts warranty coverage. The distributors are responsible for all marketing, sales, installation, training and warranty services for the Company’s products. The Company does not provide price protection or stock rotation rights to any of its distributors. In addition, the Company’s distributor agreements do not allow the distributor to return or exchange products and the distributor is obligated to pay the Company for the sale regardless of whether the distributor is able to resell the product.

The Company offers either a one or three year warranty for systems sold in the United States and a one year replacement parts warranty for systems sold to distributors outside of the United States. The Company also provides a warranty for its consumable products. The Company provides for the estimated cost to repair or replace products under warranty at the time of sale. The Company also offers customers extended warranty service contracts. Revenue from the sale of extended service contracts is recognized on a straight-line basis over the period of the applicable extended contract. The Company also earns service revenue from customers outside of their warranty term or extended service contracts. Such service revenue is recognized as the services are provided.

In conjunction with the Reliant acquisition, the Company assumed an agreement with an external party to collaborate regarding the joint development and the worldwide commercialization of devices and accessories that incorporate Fraxel technology. Under the terms of this arrangement, the external party will make advance quarterly payments for the costs incurred in performing activities under the arrangement. Approximately $3,000 of payments remained as of December 31, 2009, to be received by the Company over the next three quarters in 2010.

Shipping and Handling Costs

Shipping and handling costs charged to customers are included in net revenue and the associated expense is included in cost of revenue in the statements of operations.

Research and Development Expenditures

Costs related to research, design and development of products are charged to research and development expense as incurred.

Advertising Costs

Advertising costs are included in sales and marketing expenses and are expensed as incurred. Advertising costs were $420, $490 and $765 for the years ended December 31, 2009, 2008 and 2007, respectively.

Stock-Based Compensation

The Company recognizes stock-based compensation expense, using a fair-value based method, for costs related to all share-based payments including stock options. The Company estimates the fair value of share-based payment awards on the date of grant using an option-pricing model. The Company adopted the prospective transition method, which requires that for nonpublic entities that used the minimum value method for either pro forma or financial statement recognition purposes, shall be applied to option awards granted, modified,

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

repurchased or cancelled after the required effective date. For options granted prior January 1, 2006, which the requisite service period has not been performed as of January 1, 2006, the Company will continue to recognize compensation expense on the remaining unvested awards under the intrinsic-value method. For options that were granted prior to January 1, 2006 and then modified after January 1, 2006, the Company will apply a fair-value based method to these option grants upon the date of modification. All option grants valued after January 1, 2006 will be expensed on a straight-line basis.

Equity instruments issued to non-employees are recorded at their fair value on the measurement date and are subject to periodic adjustment as the underlying equity instruments vest. Non-employee stock-based compensation charges are amortized over the vesting period, on a straight-line basis.

Income Taxes

Deferred tax assets and liabilities are determined based on the differences between the financial reporting and tax bases of assets and liabilities, measured at tax rates that will be in effect when the differences are expected to reverse. Valuation allowances are established when necessary to reduce deferred tax assets to the amounts expected to be realized.

Foreign Currency Translation

The functional currency of the Company’s foreign subsidiary is the U.S. dollar. Translation adjustments resulting from remeasuring the foreign currency denominated financial statements of the subsidiary into U.S. dollars are included in the Company’s consolidated statements of operations. Translation gains and losses have not been significant to date.

Comprehensive Income (Loss)

Comprehensive income (loss) generally represents all changes in stockholders’ equity except those resulting from investments, contributions by, or distributions to stockholders. The Company’s unrealized gain (loss) on marketable investments, net of related taxes, represents the only component of comprehensive income (loss) that is excluded from net income (loss).

Net Income (Loss) Per Common Share

Basic net income (loss) per share is computed by dividing the net income (loss) for the period by the weighted average number of common shares outstanding during the period as reduced by the weighted average unvested common shares subject to repurchase by the Company.

Diluted net income (loss) per share attributed to common shares is computed by dividing the net income (loss) attributable to common shares for the period by the weighted average number of common and potential common shares outstanding during the period, if the effect of each class of potential common shares is dilutive. Potential common shares include common stock subject to repurchase rights and incremental shares of common stock issuable upon the exercise of stock options and warrants and upon conversion of preferred stock and incremental shares of common stock issuable under employee stock purchase plan and restricted stock units. The

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

dilutive effect of potential common shares is reflected in diluted net income (loss) per share by application of the treasury stock method, which includes consideration of stock-based compensation.


	Years Ended December 31,
	2009			2008			2007
Historical net income (loss) per share:
Numerator
Net income (loss)	$	(11,192	)	$	(16,393	)	$	2,780

Denominator
Weighted-average common shares outstanding		47,848,258			24,506,673			23,244,000
Less: weighted-average unvested common shares subject to repurchase		—			—			(2,969	)

Denominator for basic net income (loss) per share		47,848,258			24,506,673			23,241,031
Dilutive effect of potential common stock		—			—			1,640,458
Dilutive effect of common stock subject to repurchase		—			—			2,969

Denominator for diluted net income (loss) per share		47,848,258			24,506,673			24,884,458

Basic net income (loss) per share	$	(0.23	)	$	(0.67	)	$	0.12

Diluted net income (loss) per share	$	(0.23	)	$	(0.67	)	$	0.11

The following outstanding options, common stock subject to repurchase, warrants, restricted stock units and common stock issuable under the 2006 Employee Stock Purchase Plan were excluded from the computation of diluted net income (loss) per common share for the periods presented because including them would have had an antidilutive effect:


	Years Ended December 31,
	2009	2008	2007
Options to purchase common stock	6,763,252	5,174,124	1,494,691
Common stock subject to repurchase	—	—	—
Common stock warrants	316,327	344,105	—
Restricted stock units	132,108	170,652	—
Common stock issuable under Employee Stock Purchase Plan	—	89,628	—

Recent Accounting Pronouncements

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

In April 2008, ASC 350-30-65-1, Determination of the Useful Life of Intangible Assets (“ASC 350-30-65-1”), amended the factors considered in developing renewal or extension assumptions used to determine the useful life of a recognized intangible asset under ASC 350, Intangibles-Goodwill and Other, ASC 350-30-65-1 requires a consistent approach between the useful life of a recognized intangible asset under ASC 350 and the period of expected cash flows used to measure the fair value of an asset under ASC 805. ASC 350-30-65-1 also requires enhanced disclosures when an intangible asset’s expected future cash flows are affected by an entity’s intent and/or ability to renew or extend the arrangement. ASC 350-30-65-1 is effective for financial statements issued for fiscal years beginning after December 15, 2008 and is applied prospectively. Early adoption is prohibited. The Company’s adoption of ASC 350-30-65-1 on January 1, 2009 did not have a material impact on the Company’s financial position, results of operations or cash flows.

In April 2009, ASC 820-10-65-4, Determining Fair Value When the Volume and Level of Activity for the Asset or Liability Have Significantly Decreased and Identifying Transactions That Are Not Orderly, provided additional guidance for estimating fair value in accordance with ASC 820, Fair Value Measurements and Disclosures, when the volume and level of activity for the asset or liability have significantly decreased. This ASC also includes guidance on identifying circumstances that indicate a transaction is not orderly. This ASC emphasizes that even if there has been a significant decrease in the volume and level of activity for the asset or liability and regardless of the valuation technique(s) used, the objective of a fair value measurement remains the same. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction (that is, not a forced liquidation or distressed sale) between market participants at the measurement date under current market conditions. ASC 820-10-65-4 is effective for interim and annual reporting periods ending after June 15, 2009, and is applied prospectively. Accordingly, the Company adopted the provisions of ASC 820-10-65-4 on April 1, 2009. The adoption of this guidance did not have a material impact on the Company’s financial position, results of operations or cash flows.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

In April 2009, ASC 825-10-65-1, Interim Disclosures about Fair Value of Financial Instruments, was revised to require disclosures about fair value of financial instruments in interim as well as annual financial statements. This standard is effective for periods ending after June 15, 2009. Accordingly, the Company adopted the provisions of ASC 825-10-65-1 on April 1, 2009. The adoption of this guidance did not have a material impact on the Company’s financial position, results of operations or cash flows. However, the provisions of ASC 825-10-65-1 result in additional disclosures with respect to the fair value of the Company’s financial instruments.

In January 2010, the FASB issued ASU, 2010-06, Fair Value Measurement and Disclosures (Topic 820), which relates to the disclosure requirements for fair value measurements and provides clarification for existing disclosures requirements. More specifically, this update will require (a) an entity to disclose separately the amounts of significant transfers in and out of Levels 1 and 2 fair value measurements and to describe the reasons for the transfers; and (b) information about purchases, sales, issuances and settlements to be presented separately (i.e. present the activity on a gross basis rather than net) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3 inputs). This guidance clarifies existing disclosure requirements for the level of disaggregation used for classes of assets and liabilities measured at fair value and requires disclosures about the valuation techniques and inputs used to measure fair value for both recurring and nonrecurring fair value measurements using Level 2 and Level 3 inputs. The new disclosures and clarifications of existing disclosure are effective for fiscal years beginning after December 15, 2009, except for the disclosure requirements for related to the purchases, sales, issuances and settlements in the rollforward activity of Level 3 fair value measurements. Those disclosure requirements are effective for fiscal years ending after December 31, 2010. We do not believe the adoption of this guidance will have a material impact to our consolidated financial statements.

NOTE 3 — ACQUISITION OF RELIANT TECHNOLOGIES, INC.

On December 23, 2008, the Company acquired 100% of the common stock of Reliant Technologies, Inc. (“Reliant”), a privately held medical device company, for $25,000 in cash, 23.6 million shares of Solta Medical common stock and assumption of $9,438 of debt, including a $5,000 note payable to the Company. This

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

acquisition expands the market presence of the Company. Complementary product offerings allow the Company to cross-sell a more complete product line to physician and their patients through one of the largest direct U.S. sales forces in the industry and an expansive international distribution network.

The Company’s consolidated financial statements include the results of operations of Reliant from the date of acquisition through December 31, 2009. The purchase price is the total of $25,000 cash paid, $61,407 for 23.6 million shares issued at the $2.60 average closing share price over the period two days before to two days after the merger announcement date, $181 fair value of assumed warrants and $4,051 in direct transaction costs. During the year ended December 31, 2009, the Company reached an agreement and received from escrow approximately $1,200 for an adjustment of the acquisition consideration from a shortfall in Reliant’s closing working capital compared to the amount stipulated in the merger.

The original purchase price allocation adjustments primarily relate to adjustments to residual goodwill for changes in the valuation of inventory acquired, accrued restructuring, prepaid expenses, and an adjustment of the acquisition consideration for a shortfall in Reliant’s closing working capital. The following summarizes the purchase price allocation for the Reliant acquisition, adjusted through December 31, 2009:


Cash	$	1,281
Accounts receivable		2,349
Inventory		11,262
Prepaid expenses and other assets		789
Property and equipment		3,103
Intangible assets:		—
Fraxel trade name		3,580
Customer relationships		4,810
Non-compete agreement		500
Core technology		18,420
Product technology		9,270
Product development contract		620
Future royalties contract		3,890
In-process research and development		9,060
Goodwill		47,289

Total assets acquired		116,223
Liabilities assumed:
Accounts payable		6,182
Accrued liabilities		5,517
Accrued restructuring		3,116
Other liabilities		294
Deferred revenue		2,281
Notes payable (including a $5,000 note payable owed to Thermage)		9,438

Total liabilities acquired		26,828

Net acquired assets	$	89,395

The Company recorded an estimate for costs to terminate certain activities associated with the Reliant operations. The original restructuring accrual of $2,967 as of December 31, 2008 was principally related to the termination of 45 Reliant employees for $1,797 and restructuring of facilities of $1,170. As a result of payments and adjustment made during 2009, the restructuring accrual was $7 at December 31, 2009 (see note 4).

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Of the total original purchase price of $90,639, $41,090 was allocated to amortizable intangible assets. $37,200 of the amortizable intangible assets are being amortized using a straight-line method over their respective estimated useful lives of two to 12 years. The royalties intangible asset will be amortized using a straight-line method over its estimated useful life of 10 years once royalty revenues commence. During the quarter ended September 30, 2009, the Company reached an agreement and received from escrow approximately $1,200 related to an adjustment of the acquisition consideration for a shortfall in Reliant’s closing working capital and as a result the original purchase price was reduced to $89,395.

In conjunction with the acquisition of Reliant, the Company recorded an expense of $9,060 for acquired in-process research and development (IPR&D) during the quarter and year ended December 31, 2008 because feasibility of the acquired technology had not been established and no alternative future use exists. The IPR&D expense was included in operating expenses in the consolidated statement of operations for the year ended December 31, 2008.

The IPR&D is related to the development of three new products. The three significant IPR&D projects at date of acquisition were as follows: Project A — a next generation dual wave-length Fraxel re:store system; Project B — a body shaping product; and Project C — a resurfacing product for the professional market being developed in a collaborative partnership. At the date of acquisition, it was estimated that Project A would be completed in 2009, Project B would be completed in 2010 and Project C would be completed in 2011. Project A was completed in September 2009 and FDA clearance was received in October 2009. Project B and C are currently in clinical investigations and commercialization is expected in 2011, at which time cash flows are expected to commence.

The Company used the income approach (excess earnings method) to determine the estimated fair values of the acquired IPR&D, which uses a discounted cash flow model, based on estimates of successful product development and commercialization to estimate future net cash flows resulting from projected revenues and related costs. These estimates take into account the stages of completion and the risks surrounding successful development and commercialization of the underlying product candidates. The Company calculated the present value of the expected future cash flows attributable to the in-process technology using a 21% to 23% discount rate for the related projects. The after tax cash flows are calculated by applying cost, expense, income tax and contributory asset charge assumptions to the IPR&D revenue streams.

The major risks and uncertainties associated with the timely and successful completion of these IPR&D projects includes development and technological difficulties, delays caused by legal actions brought by the

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Company’s competitors and the timing of the receipt of necessary regulatory approvals. No assurances can be given that the underlying assumptions used to prepare the discounted cash flow analysis will not change or the timely completion of each project to commercial success will occur. For these reasons, actual results may vary significantly from estimated results.

The Company allocated the residual value of $48,158 to goodwill at December 23, 2008, and adjusted this amount to $47,289 during the year ended December 31, 2009 for adjustments of the acquisition consideration for a shortfall in Reliant’s closing working capital and adjustments to the valuation of inventory acquired, accrued restructuring, prepaid expenses.

•

The expansion of the Company’s recurring revenue model allowing for increased treatment tip usage as well as expanding clinical applications for our physician customers.

•

Access to an expanded base of industry knowledge and expertise.

•

Opportunity to complement our existing products for the aesthetic market with a synergistic technology and new clinical treatment applications.

•

Expansion of our global presence thereby increasing our market penetration.

Pro forma financial information (unaudited)

The unaudited financial information in the table below summarizes the combined results of operations of the Company and Reliant on a pro forma basis, as though the companies had been combined as of the beginning of each of the periods presented. The pro forma financial information is presented for informational purposes only and is not indicative of the results of operations that would have been achieved if the Reliant acquisition had taken place at the beginning of each of the periods presented.

The pro forma financial information for all periods presented includes the business combination accounting effect on the amortization charges from acquired intangible assets, adjustments to certain acquired assets and liabilities and acquisition costs reflected in the Company’s and Reliant’s historical statements of income for periods prior to the acquisition, and the related tax effects.

The unaudited pro forma financial information for the years ended December 31, 2008 and 2007 combines the historical results for the Company for those years, with the historical results for Reliant as a separate entity, for the years ended December 31, 2008 and 2007.


	Years ended December 31,
	2008			2007
Net revenue	$	127,761		$	133,247
Net loss		(24,142	)		(22,515	)
Net loss per share — basic	$	(0.99	)	$	(0.48	)
Net loss per share — diluted	$	(0.99	)	$	(0.48	)

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

NOTE 4 — BALANCE SHEET DETAIL

Cash, Cash Equivalent and Marketable Investments

The Company considers all highly liquid investments, with an original maturity of three months or less at the time of purchase to be cash equivalents. Investments in debt securities are accounted for as “available-for-sale” securities held for use in current operations and are classified in current assets within “Marketable Investments”. Cash, cash equivalents and marketable investments as of December 31, 2009 and 2008 consisted of the following:


December 31, 2009	Amortized Cost
Checking and money market accounts	$	14,744

Reported as:
Cash and cash equivalents	$	14,744


December 31, 2008	Amortized Cost
Checking and money market accounts	$	7,556
Corporate and Euro dollar bonds		7,291
Medium and short term notes		10,579

	$	25,426

Reported as:
Cash and cash equivalents	$	7,556
Marketable investments		17,870

	$	25,426

The Company’s “available-for-sale” marketable securities amortized cost approximates fair market value at December 31, 2008. The Company deemed certain declines in the fair market value of its “available-for-sale” marketable securities as at December 31, 2008 to be other than temporary and as a result, recorded those losses in the results of operations. For the year ended December 31, 2008, the Company recorded a $1,088 loss on these marketable securities; this was primarily related to a single security in its investment portfolio. The Company recorded a $224 gain on marketable securities for the year ended December 31, 2009. The Company had no marketable securities as of December 31, 2009 as all these securities matured during 2009.

The Company has a margin account with JP Morgan Chase, related to its marketable investments. The margin account had a liability balance of $12,399 as of December 31, 2008 and a zero balance as of December 31, 2009. The liabilities were included in the accompanying consolidated financial statements as short-term borrowings. Pursuant to the terms of credit offered by JP Morgan Chase, the Company may borrow up to 75% of the market value of the Company’s investment account with JP Morgan Chase at an interest rate of the 30-day Libor rate plus 100 basis points (1.23% and 2.08% as of December 31, 2009 and December 31, 2008, respectively). Under the terms of the Customer Agreement signed with JP Morgan Chase, an event of default would occur if, among other things: (i) the Company does not pay any liability or perform any obligation to JP Morgan Chase by the time the Company is obligated to perform such obligation; (ii) the Company otherwise breaches, repudiates or defaults under the Customer Agreement or any other agreement it has with JP Morgan Chase; (iii) the Company commences a proceeding in bankruptcy or insolvency or one is commenced against the

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Company; (iv) any guarantor, co-signer or other party (a “Responsible Party”) liable for or providing security for the Company’s obligations to JP Morgan Chase defaults in its obligation to JP Morgan Chase or commences a proceeding in bankruptcy or insolvency or one is commenced against it; (v) an attachment is made against the Company’s or a Responsible Party’s account(s) with JP Morgan Chase; (vi) a receiver is appointed with respect to the Company, any of the Company’s assets or the assets of a Responsible Party; or (vii) an event, circumstance or condition occurs that, in JP Morgan Chase’s judgment, materially impairs the Company’s creditworthiness or the Company’s ability to timely perform its obligations. As of December 31, 2009, there were no borrowings against this margin account. In addition, there was no event of default through December 31, 2009.

Fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. A fair value hierarchy prioritizes the inputs used in measuring fair value as follows: (Level 1) observable inputs such as quoted prices in active markets; (Level 2) inputs other than the quoted prices in active markets that are observable either directly or indirectly; and (Level 3) unobservable inputs in which there is little or no market data, which require the Company to develop its own assumptions. This hierarchy requires the Company to use observable market data, when available, and to minimize the use of unobservable inputs when determining fair value. On a recurring basis, the Company measures its cash equivalents and marketable investments at fair value.

The Company’s cash equivalents and marketable investments are classified within Level 1 or Level 2 of the fair value hierarchy because they are valued using quoted market prices, broker or dealer quotations, or alternative pricing sources with reasonable levels of price transparency.

Fair value hierarchy of the Company’s cash equivalents, which are money market funds that mature in three months or less, are classified as follows at December 31, 2009:


	Fair Market Value		Fair Value Measurements at Reporting Date using Quoted Prices in Active Markets for Identical Assets (Level 1)
Money market funds	$	193	$	193

Fair value hierarchy of the Company’s cash equivalents and marketable investments are classified as follows at December 31, 2008:


			Fair Value Measurements at Reporting Date using
	Fair Market Value		Quoted Prices in Active Markets for Identical Assets (Level 1)		Significant other Observable Inputs (Level 2)
Money market funds	$	3,750	$	3,750	$	—
Corporate and Euro dollar bonds		7,291		—		7,291
Medium and short term notes		10,579		—		10,579

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Inventories, Net

Inventories, net consist of the following:


	December 31,
	2009		2008
Raw materials	$	4,705	$	6,058
Work-in-process		556		423
Finished goods		8,856		11,823

	$	14,117	$	18,304

Property and equipment, net consists of the following:


	December 31,
	2009			2008
Leasehold improvements	$	2,908		$	2,832
Furniture and fixtures		1,258			1,238
Machinery and equipment		6,689			5,793
Software		1,516			1,334
Computers and equipment		2,304			2,307

		14,675			13,504
Less: Accumulated depreciation and amortization		(9,062	)		(6,663	)

	$	5,613		$	6,841

Depreciation and amortization expense related to property and equipment was $2,708, $1,405 and $1,386 for the years ended December 31, 2009, 2008 and 2007, respectively.

Intangible Assets

The Company’s intangible assets were acquired in connection with the acquisition of Reliant Technologies, Inc. on December 23, 2008. The carrying amount and accumulated amortization expense of the acquired intangible assets at December 31, 2009 and 2008 were as follows:


December 31, 2009	Estimated Useful Life	Gross Carrying Value		Accumulated Amortization			Net Carrying Value
Intangible assets amortized to cost of revenue:
Core technology	12 years	$	18,420	$	(1,569	)	$	16,851
Product technology	7 years		9,270		(1,353	)		7,917
Future royalties contract	10 years		3,890		—			3,890

			31,580		(2,922	)		28,658
Intangible assets amortized to operating expenses:
Product development contract	1.9 years		620		(338	)		282
Non-compete agreement	2 years		500		(255	)		245
Fraxel trade name	10 years		3,580		(366	)		3,214
Customer relationships	12 years		4,810		(410	)		4,400

			9,510		(1,369	)		8,141

Total intangible assets		$	41,090	$	(4,291	)	$	36,799

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)


December 31, 2008	Estimated Useful Life	Gross Carrying Value		Accumulated Amortization			Net Carrying Value
Intangible assets amortized to cost of revenue:
Core technology	12 years	$	18,420	$	(33	)	$	18,387
Product technology	7 years		9,270		(29	)		9,241
Future royalties contract	10 years		3,890		—			3,890

			31,580		(62	)		31,518
Intangible assets amortized to operating expenses:
Product development contract	1.9 years		620		(7	)		613
Non-compete agreement	2 years		500		(5	)		495
Fraxel trade name	10 years		3,580		(8	)		3,572
Customer relationships	12 years		4,810		(9	)		4,801

			9,510		(29	)		9,481

Total intangible assets		$	41,090	$	(91	)	$	40,999

The Company has included amortization of acquired intangible assets directly attributable to revenue-generating activities in cost of revenue. The Company has included amortization of acquired intangible assets not directly related to revenue-generating activities in operating expenses. During the years ended December 31, 2009 and 2008, the Company recorded amortization expense in the amount of $2,860 and $62 to cost of revenue and $1,340 and $29 to operating expenses, respectively.

The Company has recorded an acquired intangible asset related to a future royalties contract that has not yet begun to generate revenue. The Company has deferred the amortization of the acquired intangible asset related to the future royalties contract until the asset begins to generate revenue.

As of December 31, 2009, the total expected future amortization related to intangible assets, is as follows:


	Amortization included in Cost of Revenue		Amortization included in Operating Expense		Total Amortization Expense
2010		2,859		1,285		4,144
2011		2,859		759		3,618
2012		2,859		759		3,618
2013		2,859		759		3,618
2014		2,859		759		3,618
2015 and thereafter		14,363		3,820		18,183

	$	28,658	$	8,141	$	36,799

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Goodwill

The changes in the carrying amount of goodwill are as follows:


	Years Ended December 31,
	2009			2008
Balance at beginning of period	$	48,158		$	—
Addition from acquisition		—			48,158
Valuation adjustments		375			—
Settlement from escrow account		(1,244	)		—

Balance at end of period	$	47,289		$	48,158

Accrued Liabilities

Accrued liabilities consist of the following:


	December 31,
	2009		2008
Payroll and related expenses	$	3,794	$	2,876
Royalties payable		1,277		1,082
Warranty		1,163		1,217
Professional fees		939		645
Accrued purchases		674		310
Accrued transaction costs		—		2,128
Other		3,114		2,827

	$	10,961	$	11,085

Accrued Restructuring

In addition to the restructuring accrual relating to the Reliant acquisition (see Note 3), the Company recorded further accruals for severance payments to 23 former Thermage employees at December 31, 2008. The costs associated with the termination of Thermage employees were recorded as a charge to the income statement for the year ended December 31, 2008. The accrued restructuring charges remaining at December 31, 2009 are expected to be paid in 2010. A summary of all restructuring activity is shown below:


	Severance			Facilities			Total
Balance at December 31, 2008	$	2,379		$	1,170		$	3,549
Adjustments		47			148			195
Cash payments		(2,426	)		(1,311	)		(3,737	)

Balance at December 31, 2009	$	—		$	7		$	7

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

NOTE 5 — WARRANTY AND SERVICE CONTRACTS

Standard Warranty

The Company accrues for the estimated cost to repair or replace products under warranty at the time of sale. A summary of standard warranty accrual activity is shown below:


	Years Ended December 31,
	2009			2008
Balance at beginning of period		1,217			577
Additions from acquisition		—			722
Accruals for warranties issued during the period		1,287			280
Accruals related to pre-existing warranties
(including changes in estimates)		—			122
Settlements made during the period		(1,341	)		(484	)

Balance at end of period	$	1,163		$	1,217

Extended Warranty Contracts

The Company sells extended warranty contracts to its customers. At the time of sale, the Company defers the amounts billed for such service contracts. Deferred service contract revenue, included as Deferred Revenue on the balance sheet, is recognized on a straight-line basis over the period of the applicable extended warranty contract. A summary of extended warranty contract activity is shown below:


	Years Ended December 31,
	2009			2008
Balance at beginning of period	$	2,603			1,471
Additions from acquisition		—			1,367
Payments received		3,238			776
Revenue recognized		(3,401	)		(1,011	)

Balance at end of period	$	2,440		$	2,603

The Company incurred costs of $509, $402 and $446 under extended warranty contracts during the years ended December 31, 2009, 2008 and 2007, respectively.

NOTE 6 — CREDIT FACILITY

The Company entered into a Loan and Security Agreement (the “Loan Agreement”) with Silicon Valley Bank (the “Lender”) on March 9, 2009 with a subsequent amendment on March 27, 2009, providing for a $6,000 secured revolving loan facility, with availability to be subject to a borrowing base formula, and a $3,000 secured term loan. On June 30, 2009, the Company entered into a second amendment to the Loan Agreement which provides for an increase of the secured revolving loan facility to $8,000 and an additional $1,000 secured term loan. At December 31, 2009, $8,000 was outstanding on the revolving loan facility.

Borrowings under the revolving loan facility accrue interest at a per annum rate equal to the Lender’s prime rate as in effect from time to time plus 1.00%, subject to a minimum per annum rate of 5.00%. Interest on borrowings under the revolving loan facility is payable monthly. The Company may borrow, repay and reborrow

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

funds under the revolving loan facility until March 9, 2011, at which time the revolving loan facility matures and all outstanding amounts under the revolving loan facility must be repaid. In the event the Company elects to terminate the revolving loan facility on or before the maturity date, the Company is required to pay a fee in the amount of $60.

Borrowings under the term loans accrue interest at a per annum effective rate equal to 6.39%. The term loans are payable in 33 equal monthly payments of principal and interest. All outstanding amounts under the initial $3,000 term loan, plus a final payment of $105, will be due and payable on the maturity date of December 1, 2011. All outstanding amounts under the additional $1,000 term loan, plus a final payment of $35, will be due and payable on the maturity date of March 1, 2012. In the event the Company elects to prepay the initial and additional term loans prior to their maturity dates, the Company is required to pay fees in the amount of $60 and $20, respectively.

Aggregate annual principal payments due under the above term loans at December 31, 2009 are as follows:


Year Ending December 31,
2010	$	1,432
2011		1,528
2012		98

		3,058
Less: Current portion		(1,432	)

Noncurrent portion	$	1,626

All obligations under the Loan Agreement are secured by substantially all of the personal property of the Company.

In connection with the Loan Agreement, the Company’s subsidiary, Reliant Technologies, LLC (“Reliant LLC”), entered into an Unconditional Guaranty, dated as of March 9, 2009 (the “Guaranty”), in favor of Lender, pursuant to which Reliant LLC guaranteed all of the obligations of the Company under the Loan Agreement, and a Security Agreement, dated as of March 9, 2009 (the “Security Agreement”), with Lender, pursuant to which Reliant LLC granted a security interest in substantially all of its personal property to collateralize its obligations under the Guaranty.

The Loan Agreement contains restrictions that include, among others, restrictions that limit the Company’s and its subsidiaries’ ability to dispose of assets, enter into mergers or acquisitions, incur indebtedness, incur liens, pay dividends or make distributions on the Company’s capital stock, make investments or loans, and enter into certain affiliate transactions, in each case subject to customary exceptions for a credit facility of this size and type. The Loan Agreement also contains financial covenants requiring the Company to maintain a minimum liquidity ratio, a minimum tangible net worth, and, beginning with the quarter ending December 31, 2009, positive EBITDA. The Company was in compliance with these covenants as of December 31, 2009, except for maintaining the minimum liquidity ratio as required by the Loan Agreement. The Lender issued the Company a formal waiver of the liquidity covenant violation. The company repaid all funds drawn from the revolving loan facility in January 2010.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

NOTE 7 — COMMITMENTS AND CONTINGENCIES

Facility Lease Commitments

The Company has a noncancelable operating lease on its current headquarters facility that expires in September 2013. Under the terms of the lease, the Company is responsible for its share of taxes, insurance and common area maintenance costs. Rent expense for the years ended December 31, 2009, 2008 and 2007 was $1,428, $1,344 and $815, respectively.

Future minimum lease payments under the Company’s noncancelable operating leases at December 31, 2009 are as follows:



Years Ending December 31,
2010		1,114
2011		1,122
2012		1,153
2013		294

	$	3,683

Contingencies

From time to time, the Company is involved in litigation relating to claims arising from the ordinary course of business. The Company routinely assesses the likelihood of any adverse judgments or outcomes related to legal matters and claims, as well as ranges of probable losses. A determination of the amount of the reserves required, if any, for these contingencies is made after thoughtful analysis of each known issue and an analysis of historical experience. Management does not believe the final disposition of these matters will have a material adverse effect on the financial statements and future cash flows of the Company. Also, the Company does not record gain contingencies.

The Company advised Alma Lasers, Ltd. and Alma Lasers, Inc. (together “Alma”) in February 2006 that Alma’s Accent product infringed numerous patents owned by the Company. On April 26, 2007, Alma filed a lawsuit against the Company in the United States District Court for the District of Delaware requesting declaratory judgment that Alma’s Accent product does not infringe the Company’s patents and that the Company’s patents are invalid. Management believes that the Company has meritorious defenses in this action and intends to defend the action vigorously. On June 20, 2007, the Company filed patent infringement counterclaims against Alma in the United States District Court for the District of Delaware asserting that that Alma’s Accent^XL and Harmony systems infringe ten of the Company’s U.S. patents. The counterclaims were amended on December 10, 2007 to include a claim of infringement of an eleventh patent. In addition to damages and attorney fees, the Company is asking the Court to enjoin Alma from further infringement. During May, June and July 2008, Alma filed with the United States Patent and Trademark Office requests that all of the eleven patents asserted by the Company be reexamined. The United States Patent and Trademark Office has made rejections of some claims in each of these 11 patents. Management believes that the United States Patent and Trademark Office will reaffirm the validity of the Company’s patents. Management does not believe the final disposition of these matters will have a material adverse effect on the financial statements and future cash flows of the Company.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

On December 21, 2009, a complaint was filed in the Santa Clara County Superior Court by three former stockholders of Reliant Technologies, Inc. against Reliant and certain former officers and directors of Reliant in connection with our acquisition of Reliant, which closed on December 23, 2008. The complaint purports to be brought on behalf of the former common stockholders of Reliant. As a result of the acquisition, a successor entity to Reliant, Reliant Technologies, LLC, became our wholly-owned subsidiary. Two of the Company’s Board of Directors are among the defendants named in the complaint, and one of the two is also the Company’s Chief Technology Officer. The principal claim, among others, is that Reliant violated the California Corporations Code by failing to obtain the vote from a majority of holders of Reliant’s common stock prior to the consummation of the acquisition. The complaint also purports to challenge disclosures made by Reliant in connection with its entry into the acquisition and that the defendants failed to maximize the value of Reliant for the benefits of Reliant’s common stockholders. We believe that this suit is without merit, and we intend to vigorously defend it. Although we do not expect that the final disposition of this litigation will have a material adverse effect on our financial results, we may have to devote certain personnel and resources to resolve this litigation.

Indemnifications

In the normal course of business, the Company enters into contracts and agreements that contain a variety of representations and warranties and provide for general indemnifications. The Company’s exposure under these agreements is unknown because it involves claims that may be made against the Company in the future, but have not yet been made. To date, the Company has not paid any claims or been required to defend any action related to its indemnification obligations. However, the Company may record charges in the future as a result of these indemnification obligations.

In accordance with its certificate of incorporation, bylaws and individual indemnification agreements, the Company has indemnification obligations to its officers and directors and certain key employees for certain events or occurrences, subject to certain limits, while they are serving at the Company’s request in such a capacity. There have been no claims to date and the Company has a director and officer insurance policy that enables it to recover a portion of any amount paid for future claims.

NOTE 8 — Stockholder’s Equity

Convertible Preferred Stock

The Company’s Board of Directors has authorized 10,000,000 shares of convertible preferred stock, $0.001 par value, issuable in series. At December 31, 2009 and 2008, there were no shares issued or outstanding.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Common Stock

The Company’s amended and restated certificate of incorporation authorizes the Company to issue 100,000,000 shares of $0.001 par value common stock. At December 31, 2009 there were 48,077,028 share of common stock outstanding. Common stockholders are entitled to dividends as and when declared by the board of directors subject to the prior rights of the preferred stockholders.

2006 Employee Stock Purchase Plan

On August 2, 2006, the board of directors adopted the 2006 Employee Stock Purchase Plan (“ESPP”). A total of 250,000 shares of common stock were reserved for issuance pursuant to the 2006 Employee Stock Purchase Plan. The 2006 Employee Stock Purchase Plan was approved by the Company’s stockholders on August 4, 2006. The 2006 Employee Stock Purchase Plan became effective upon the closing of the Company’s initial public offering. Under the 2006 Employee Stock Purchase Plan, eligible employees are permitted to purchase common stock through payroll deduction at a price of 85% of the lower market value as of the beginning or the end of the six-month offering period. Shares of common stock will be increased on the first day of each fiscal year, commencing in 2007, by an amount equal to the lower of: (i) 900,000 shares; (ii) 2.0% of the outstanding shares of the Company’s common stock on the first day of the fiscal year; or (iii) such other amount as may be determined by the board of directors. Each offering period starts on the first trading day on or after May 15 and November 15 of each year. The Company issued 239,708, 157,090 and 167,085 shares of common stock under this plan during the years ended December 31, 2009, 2008 and 2007, respectively. At December 31, 2009, 1,516,362 shares remained available for future issuance. In addition, on January 1, 2010, the Company added 900,000 shares to the Plan.

2006 Equity Incentive Plan and 1997 Stock Option Plan

In 1997, the Company adopted the 1997 Stock Option Plan. The Plan provides for the granting of stock options to employees and consultants of the Company. Options granted under the Plan may be either incentive stock options or nonqualified stock options. Incentive stock options (“ISO”) may be granted only to Company employees (including officers and directors who are also employees). Nonqualified stock options (“NSO”) may be granted to Company employees and consultants. The Company has reserved 5,940,000 shares of common stock for issuance under the Plan.

On August 2, 2006, the board of directors adopted the 2006 Equity Incentive Plan. A total of 2,750,000 shares of common stock were reserved for issuance pursuant to the 2006 Equity Incentive Plan. In addition, the shares reserved for issuance under the 2006 Equity Incentive Plan included shares reserved but unissued under the Company’s 1997 Stock Option Plan as the result of termination of options or the repurchase of shares. The 2006 Equity Incentive Plan was approved by the Company’s stockholders on August 4, 2006.

Shares of common stock approved under the 2006 Equity Incentive Plan will be increased on the first day of each fiscal year, commencing in 2007, by an amount equal to the lower of: (i) 1,800,000 shares; (ii) 3.5% of the outstanding shares of the Company’s common stock on the last day of the immediately preceding fiscal year; or (iii) such other amount as may be determined by the board of directors. On January 1, 2010, the Company added 1,682,695 shares to the 2006 Equity Incentive Plan.

Options under the 1997 Stock Option Plan and 2006 Equity Incentive Plan may be granted for periods of up to ten years and at prices no less than 85% of the estimated fair value of the shares on the date of grant as determined by the board of directors, provided, however, that (i) the exercise price of an ISO and NSO shall not

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

be less than 100% and 85% of the estimated fair value of the shares on the date of grant, respectively, and (ii) the exercise price of an ISO and NSO granted to a 10% stockholder shall not be less than 110% of the estimated fair value of the shares on the date of grant, respectively. Options granted generally vest over four years.

During the years ended December 31, 2008 and 2007, under the 2006 Equity Incentive Plan, the board of directors approved the issuance of 170,652 and 110,175 shares of restricted stock units, respectively to certain employees. The value of the restricted stock award was based on the closing stock market price on the date of award. These restricted stock units vest between 3 months to 13 months. There were no restricted stock units approved or issued during the year ended December 31, 2009.

Activity for the year end December 31, 2009 under the 1997 Stock Option Plan and 2006 Equity Incentive Plan is summarized as follows:


			Options Outstanding
	Shares Available for Grant		Number of Options		Weighted Average Exercise Price
Balance, December 31, 2008	1,462,911		5,174,124		$	3.62
Additional shares reserved	1,671,558		—			—
Options granted	(2,410,480	)	2,410,480			1.19
Options exercised	—		(78,497	)		1.47
Options repurchased or cancelled	742,855		(742,855	)		3.01

Balance, December 31, 2009	1,466,844		6,763,252		$	2.85

Information regarding stock options outstanding at December 31, 2009 is summarized as follows:


	Number of Options	Weighted Average Exercise Price		Weighted Average Contractual Terms (Years)	Aggregate Intrinsic Value
As of December 31, 2009
Options outstanding	6,763,252	$	2.85	7.46	2,927
Options vested and expected to vest	6,442,349		2.87	7.40	2,745
Options vested	3,485,208		3.40	6.22	982

The following table summarizes additional information regarding outstanding and exercisable stock options at December 31, 2009:


	Options Outstanding				Options Exercisable
Range of Exercise Prices	Number of Shares Outstanding	Weighted Average Remaining Life (Years)	Weighted Average Exercise Price		Number of Shares Exercisable	Weighted Average Exercise Price
$0.45 - $0.70	111,823	4.12	$	0.56	102,124	$	0.55
$1.00 - $1.00	1,678,834	9.02	$	1.00	356,520	$	1.00
$1.10 - $1.39	1,070,137	8.32	$	1.34	379,185	$	1.29
$1.49 - 1.88	250,045	9.33	$	1.53	33,016	$	1.53
$1.90 - 1.90	1,281,978	4.46	$	1.90	1,277,661	$	1.90
$2.02 - $4.64	1,555,965	7.98	$	3.88	724,319	$	4.05
$5.78 - $11.00	814,470	6.68	$	8.90	612,383	$	9.05

$0.45 - $11.00	6,763,252	7.46	$	2.85	3,485,208	$	3.40

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Included in the above tables are non-employee stock options granted during the year ended December 31, 2008 for 7,500 shares of common stock. There were no non-employee stock options granted during December 31, 2009 or 2007. The Company had non-employee stock options outstanding for 5,000, 12,500 and 40,833 shares of common stock, respectively, at December 31, 2009, 2008 and 2007, at weighted average exercise prices of $0.45, $2.76 and $1.15 per share, respectively. The non-employee options outstanding have a weighted average remaining contractual term of 2.24 and 6.75 years and an aggregate intrinsic value of $8 and $0 at December 31, 2009 and 2008, respectively.

The number of outstanding options vested and exercisable at December 31, 2009 was 3,485,208 options with a weighted average exercise price of $3.40 per share.

Information regarding common stock warrants outstanding at December 31, 2009 is summarized as follows:


	Number of Shares	Weighted Average Exercise Price		Weighted Average Remaining Contractual Terms (Years)
As of December 31, 2009	316,327	$	3.95	3.52

The Company assumed 316,327 of warrants to purchase common stock in the Company upon the acquisition of Reliant. The fair value of these warrants on the acquisition date was $181, determined using the Company’s stock price on December 23, 2008 of $1.49 and was calculated using a Black-Scholes valuation model with the following assumptions as of the acquisition date: remaining contractual life ranging from 3.66 years to 6.87 years, risk-free interest rate of 1.13% to 1.81%, expected volatility of 56% to 59% and no dividend yield.

Stock Option Repricing in 2006

During March 2006, the Company repriced certain stock option awards held by 116 of its employees. Under the terms of this repricing, the Company repriced employee stock options having an exercise price of $2.00 or above to an exercise price of $1.90 per share. Other than the exercise price, all other terms of the repriced options, such as vesting and contractual life, remained the same. In consideration for the repricing of eligible stock option awards, the employees who were previously granted certain stock option awards on February 2, 2005 were also required to return these awards for cancellation. As a result of this repricing, the Company repriced options to purchase 447,565 shares and options to purchase 1,523,035 unvested shares having a weighted average original exercise price of $4.18 and $4.10, respectively. Such options were repriced at a new exercise price of $1.90 per share. As a result of this repricing, the Company also cancelled 35,216 outstanding employee options with an original exercise price of $4.00 that were granted on February 2, 2005. The Company has accounted for the repricing and cancellation transactions as a modification and recorded any net incremental fair value related to vested awards as compensation expense on the date of modification. The Company will record the incremental fair value related to the unvested awards, together with unamortized stock-based compensation expense associated with the unvested awards, over the remaining requisite service period of the option holders. In connection with the repriced options, the Company recorded stock compensation expense of $496, $1,116 and $1,421 in the years ended December 31, 2009, 2008 and 2007, respectively.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Deferred Stock-based Compensation

During the years ended December 31, 2006 and 2005, the Company issued stock options to certain employees with exercise prices below the fair market value of the Company’s common stock at the date of grant, determined with hindsight. This deferred stock based compensation is amortized to expense on a straight-line basis over the period during which the Company’s options vest, generally four years. Amortization of deferred stock-based compensation was $2, $2 and $2 during the years ended December 31, 2009, 2008 and 2007, respectively.

The Company granted stock options to employees with exercise prices below estimated fair market value, determined with hindsight, on the date of grant as follows:


Grants Made During Quarter Ended	Number of Options Granted	Weighted Average Exercise Price Per Share		Weighted Average Fair Value Per Share		Weighted Average Intrinsic Value Per Share
March 31, 2006	2,139,184	$	1.90	$	10.64	$	8.74
June 30, 2006	237,500		3.00		11.48		8.48
September 30, 2006	139,350		11.00		11.93		0.93
December 31, 2006	92,352		10.08		10.71		0.63

In connection with the repricing of stock options during the year ended December 31, 2006, the Company eliminated its remaining deferred stock-based compensation amounts of $3,344 related to modified stock options.

Valuation of Options Granted to Non-employees

During the years ended December 31, 2008 and 2007, the Company issued options to non-employees. The Company did not issue any options to non-employees during the year ended December 31, 2009. The options generally vest ratably over four years. The values attributable to these options are amortized on a straight line basis over the service period and the unvested portion of these options was remeasured at each vesting date. The Company believes that the fair value of the stock options is more reliably measurable than the fair value of the services received. The value of the stock options granted were revalued at each reporting date using the Black-Scholes option pricing model using the following assumptions:


	Years Ended December 31,
	2009	2008		2007
Dividend yield	—	—		—
Risk-free interest rate	—	1.52	%	4.29	%
Expected volatility	—	53	%	57	%
Contractual life (years)	—	10		10

The weighted average estimate grant date fair values of the non-employee stock options was $2.74 and none per share for the years ended December 31, 2008 and 2007, respectively.

The stock-based compensation expense will fluctuate as the deemed fair value of the common stock fluctuates. In connection with the grant of stock options to non-employees, the Company recorded stock-based compensation expense of $1, $6 and $128 for the years ended December 31, 2009, 2008 and 2007, respectively.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Valuation of Awards Granted to Employees

The Company estimated the fair value of each option award on the date of grant using the Black-Scholes option-pricing model using the assumptions noted in the following table. Due to a lack of historical information regarding the volatility of the Company’s own stock price, expected volatility is based on an average of the historical and implied volatility of a peer group of publicly traded entities in the aesthetics market. The expected term of options gave consideration to historical exercises, the vesting term of the Company’s options, the cancellation history of the Company’s options and the options’ contractual term of ten years. The risk-free rate for the expected term of the option is based on the U.S. Treasury Constant Maturity rate as of the date of grant. The assumptions used to value options granted during the years ended December 31, 2009, 2008 and 2007 were as follows:


	Years Ended December 31,
	2009		2008		2007
Dividend yield	—		—		—
Risk-free interest rate	2.09	%	2.30	%	4.47	%
Expected volatility	59	%	54	%	54	%
Expected term (years)	4.58		4.23		4.18

The assumptions used to value ESPP shares during the years ended December 31, 2009, 2008 and 2007 were as follows:


	Years Ended December 31,
	2009		2008		2007
Dividend yield	—		—		—
Risk-free interest rate	1.44	%	2.17	%	4.63	%
Expected volatility	72	%	52	%	50	%
Expected term (years)	0.50		0.50		0.51

Total employee stock-based compensation expenses recorded during the years ended December 31, 2009, 2008 and 2007 were as follows:


	Years Ended December 31,
	2009		2008		2007
Stock-based compensation expense:

Employee stock-based compensation expense	$	2,877	$	3,447	$	3,327
Employee stock purchase plan		135		165		330
Restricted stock units		229		59		1,011

Total stock-based compensation expense	$	3,241	$	3,671	$	4,668

During the years ended December 31, 2009, 2008 and 2007, the Company granted stock options to purchase an aggregate of 2,410,480, 2,741,600 and 1,111,600 shares of common stock with an estimated weighted-average grant-date fair value of $0.61, $1.40 and $4.07 per share, respectively. The total fair value of options that vested during the years ended December 31, 2009, 2008 and 2007 was $3,204, $5,276 and $5,744, respectively. The total intrinsic value of options exercised during the years ended December 31, 2009, 2008 and 2007 was $48, $735 and $3,112, respectively. Net cash proceeds from the exercise of stock options were $115, $536 and $690 for the years ended December 31, 2009, 2008 and 2007, respectively.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

Employee stock-based compensation expense recognized in the years ended December 31, 2009, 2008 and 2007 was $3,241, $3,671 and $4,668, respectively. The expense was calculated based on awards ultimately expected to vest and has been reduced for estimated forfeitures. Forfeitures are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

At December 31, 2009 and 2008, the Company had $4,295 and $5,712, respectively, of total unrecognized compensation expense, net of estimated forfeitures, related to stock options that will be recognized over a remaining weighted-average period of 3.4 and 2.6 years, respectively.

At December 31, 2009 and 2008, the unrecognized compensation cost related to ESPP shares was $95 and $39, respectively, which will be recognized using the straight-line attribution method over 0.4 years. The weighted average estimated fair values of each stock issuance under the ESPP for the years ended December 31, 2009, 2008 and 2007 was $0.63, $0.91 and $2.02 per share, respectively.

At December 31, 2009 and 2008, the unrecognized compensation cost related to restricted stock unit awards was $19 and $248, respectively, which will be recognized using the straight-line attribution method over 0.06 and 1.06 years. The weighted average estimated fair values of each restricted stock unit issuance for the year ended December 31, 2008 was $1.49 per share.

Stock-based compensation expense recorded related to options granted to employees and non-employees, Employee Stock Purchase Plan, restricted stock unit awards and amortization of deferred stock based compensation was allocated to cost of revenue, sales and marketing, research and development and general and administrative expense as follows:


	Years Ended December 31,
	2009		2008		2007
Cost of revenue	$	241	$	190	$	288
Sales and marketing		1,244		1,449		1,796
Research and development		273		385		903
General and administrative		1,486		1,655		1,811

Total stock-based compensation expense	$	3,244	$	3,679	$	4,798

NOTE 9 — COMPREHENSIVE INCOME (LOSS)

Comprehensive income (loss) generally represents all changes in stockholders’ equity except those resulting from investments or contributions by stockholders. The Company’s unrealized gain on marketable investments represents the only component of other comprehensive income (loss) that is excluded from net income (loss). The changes in components of comprehensive income (loss) for the periods presented are as follows:


	Years Ended December 31,
	2009			2008			2007
Net income (loss)	($	11,192	)	($	16,393	)	$	2,780
Unrealized gain (loss) on marketable investments, net of tax		—			(19	)		19

Comprehensive income (loss)	($	11,192	)	($	16,412	)	$	2,799

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

NOTE 10 — NOTES RECEIVABLE FROM STOCKHOLDERS

In September 2003, a director exercised common stock options to purchase 250,000 shares of restricted common stock at $0.45 per share. The options were originally granted during the year ended December 31, 2002. During 2003, the Company permitted the officer to exercise the option award with a full-recourse note bearing interest at 3.31% per annum. Principal and interest was due on September 22, 2012. In July 2006, the note holder resigned as a director from the Company. In August 2007, the note holder repaid the balance of the note in the amount of $112 plus accrued interest of $15.

NOTE 11 — INCOME TAXES

The components of income (loss) before income taxes are as follows:


	Years Ended December 31,
	2009			2008			2007
Income (loss) subject to domestic income taxes only	$	(11,197	)	$	(16,378	)	$	3,051
Income (loss) subject to foreign income taxes only		(28	)		(1	)		—

	$	(11,225	)	$	(16,379	)	$	3,051

The components of the provision for income taxes are as follows:


	Years Ended December 31,
	2009			2008			2007
Current:
Federal	$	(233	)	$	(15	)	$	171
State		119			29			100
Foreign		15			—			—

Total provision (benefit) for income taxes	$	(99	)	$	14		$	271

The Company’s deferred tax assets and liabilities consist of the following:


	December 31,
	2009			2008
Net operating loss carryforwards	$	38,551		$	37,622
Research and development and alternative minimum tax credits		3,131			3,419
Depreciation		402			312
Deferred revenue		835			1,095
Other		4,367			3,837

Total deferred tax assets		47,286			46,285
Intangible assets		(13,760	)		(14,934	)

		33,526			31,351
Less: valuation allowance		(33,526	)		(31,351	)

Net deferred tax asset	$	—		$	—

The Company revised its 2008 tax footnote to reduce its intangible asset deferred taxes by $3,489 related to the future tax impact of amortization of acquired in-process research and development which was not

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

properly recorded in the 2008 consolidated financial statements footnotes. This additional deferred tax liability is offset by a corresponding decrease in the valuation allowance, and is not material to the 2008 consolidated financial statements. The revision has no effect on the Company’s consolidated statement of operations, earnings per share, consolidated balance sheet, consolidated statement of cash flows, or consolidated statement of stockholder’s equity for any period presented.

The differences between the U.S. federal statutory income tax rate and the Company’s effective tax rate are as follows:


	Years Ended December 31,
	2009		2008		2007
Tax at federal statutory rate	(34.00	)%	(34.00	)%	34.00	%
State, net of federal benefit	0.96	%	0.21	%	4.02	%
Meals and entertainment	1.31	%	0.64	%	3.15	%
Acquired In-Process R&D	—		18.80	%	—
Other	0.22	%	0.08	%	5.34	%
NOL Carryback	(1.85	)%	—		—
Benefit for research and development credit	(0.84	)%	(0.44	)%	(10.31	)%
Stock-based compensation	7.23	%	6.30	%	33.24	%
Tax reserves	0.61	%	0.18	%	3.54	%
Change in valuation allowance	25.48	%	8.40	%	(64.09	)%

Provision for taxes	(0.88	)%	0.17	%	8.89	%

Based upon the weight of available evidence, which includes the Company’s historical operating performance, lack of taxable income and the accumulated deficit, the Company provided a full valuation allowance against its net deferred tax asset at December 31, 2009 and 2008. The valuation allowance increased by $2,175, increased by $17,666 and decreased by $3,114 during the years ended December 31, 2009, 2008 and 2007, respectively.

As of December 31, 2009, the Company had net operating loss carryforwards of approximately $102,100 and $71,600 for federal and state tax purposes, respectively. If not utilized, these carryforwards will begin to expire in 2021 for federal and in 2013 for state purposes.

As of December 31, 2009, the Company had research and development credit carryforwards of approximately $3,600 and $3,800 for federal and state income tax purposes, respectively. If not utilized, the federal carryforward will expire in various amounts beginning in 2019. The California tax credit can be carried forward indefinitely.

The Internal Revenue Code Section 382 limits the use of net operating loss and tax credit carryforwards in certain situations where changes occur in the stock ownership of a company. In the event the Company has a change in ownership, utilization of the carryforwards could be restricted.

Uncertain Tax Positions

On January 1, 2007, the Company adopted the provisions of ASC paragraph 740-10-15-2A, Income Taxes. The provision specifies how tax benefits for uncertain tax positions are to be recognized, measured, and de-recognized in financial statements; requires certain disclosures of uncertain tax matters; specifies how reserves for uncertain tax position should be classified on the balance sheet; and provides transition and interim-period guidance, among other provisions.

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

A reconciliation of the January 1, 2007 through December 31, 2009 amount of unrecognized tax benefits is as follows:


Beginning balance at January 1, 2007	$	800
Increases (decreases of unrecognized tax benefits related to current year		210

Beginning balance at December 31, 2007		1,010
Increases (decreases) of unrecognized tax benefits taken in prior years		1,106
Increases (decreases of unrecognized tax benefits related to current year		553
Increases (decreases) of unrecognized tax benefits related to settlements		(28	)

Beginning balance at December 31, 2008		2,641
Increases (decreases) of unrecognized tax benefits taken in prior years		(49	)
Increases (decreases of unrecognized tax benefits related to current year		277

Ending balance at December 31, 2009	$	2,869

At December 31, 2009, the Company had $2,869 of unrecognized tax benefits, of which, $310 would affect the Company’s effective tax rate, if recognized. The Company does not anticipate a significant change to the total amount of unrecognized tax benefits within the next twelve months. The Company will recognize interests and penalties, when they occur, related to unrecognized tax benefits as a component of income taxes. Interest and penalties are insignificant at December 31, 2009.

The Company is subject to taxation in the U.S., various states and various foreign locations. Generally, with a few exceptions, the tax years 2005 to 2009 remain open to examination by the major taxing jurisdictions to which the Company is subject.

NOTE 12 — EMPLOYEE BENEFIT PLAN

The Company sponsors a 401(k) defined contribution plan covering all employees. Contributions made by the Company are determined annually by the board of directors. The Company made no contributions under this plan for the years ended December 31, 2009, 2008 and 2007.

NOTE 13 — RELATED PARTY TRANSACTIONS

During the years ended December 31, 2009, 2008 and 2007, the Company paid $75 each year to a member of its board of directors under the terms of a consulting agreement.

During 2008 prior to the acquisition, the Company provided $5,000 of debt financing to Reliant at an interest rate of 15% per annum, and also made net payments of $548 of expenses on behalf of Reliant.

NOTE 14 — SUBSEQUENT EVENTS

Securities Purchase Agreements

On January 7, 2010, the Company entered into securities purchase agreements in connection with a private placement of its securities to certain institutional and other accredited investors pursuant to which the Company agreed to sell and issue (i) an aggregate of 8,529,704 newly issued shares of its common stock, par value $0.001 per share and (ii) warrants to purchase an aggregate of 4,264,852 shares of common stock. The sale of securities resulted in aggregate gross proceeds of approximately $17,230. The net proceeds, after deducting offering expenses, were approximately $15,911.

100

Solta Medical, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

(In thousands of dollars, except share and per share amounts)

The common stock and warrants were sold in units consisting of one share of common stock and a warrant to purchase one-half of a share of common stock for an aggregate purchase price of $2.02 per unit which was equal to the closing price of the Company’s common stock on the NASDAQ Global Market on January 6, 2010. The warrants have an exercise price of $2.121 per share, which represent a 5% premium over the closing price of the Company’s common stock on the NASDAQ Global Market on January 6, 2010. The warrants are exercisable commencing on the six-month anniversary of the closing and will expire five and half years from the date of issuance.

Acquisition of Aesthera Corporation

On February 26, 2010, the Company acquired 100% of the common stock of Aesthera Corporation (“Aesthera”), a privately held company, for $4.75 million in shares of the Company’s common stock to Aesthera senior debt holders and $501,000 in cash to such holders, certain security holders and certain obligation holders of Aesthera, including advisors and severance recipients. The shares were valued at $1.95 per share. In connection with this transaction, the Company entered into a contingent consideration arrangement which requires payments of up to $10.75 million in shares of the Company’s common stock if certain criteria in relation to revenue recognized on the sale of Aesthera products and collection of certain Aesthera receivables are met during the one year period beginning April 1, 2010.

In addition, the Company entered into debt settlement arrangements with Aesthera debt holders pursuant to which such debt holders would receive consideration in exchange for cancellation and settlement of the outstanding debt.

NOTE 15 — SUPPLEMENTARY DATA — QUARTERLY FINANCIAL DATA (UNAUDITED)

The following table presents certain unaudited consolidated quarterly financial information for each of the eight quarters ended December 31, 2009:


	Quarters Ended
	Dec. 31, 2009			Sep. 30, 2009			Jun. 30, 2009		Mar. 31, 2009			Dec. 31, 2008			Sep. 30, 2008			Jun. 30, 2008		Mar. 31, 2008
Net revenue	$	28,403		$	17,753		$	27,417	$	25,245		$	9,549		$	13,020		$	17,881	$	16,231

Gross margin		17,433			10,442			16,640		13,738			6,145			9,811			13,786		11,873

Net income (loss)		(256	)		(6,246	)		85		(4,775	)		(15,049	)		(1,146	)		2,039		(2,237	)

Basic income (loss) per share	$	(0.01	)	$	(0.13	)	$	0.00	$	(0.10	)	$	(0.57	)	$	(0.05	)	$	0.09	$	(0.09	)

Diluted income (loss) per share	$	(0.01	)	$	(0.13	)	$	0.00	$	(0.10	)	$	(0.57	)	$	(0.05	)	$	0.08	$	(0.09	)

101

SCHEDULE II

SOLTA MEDICAL, INC.

VALUATION AND QUALIFYING ACCOUNTS

(in thousands)

For the years ended December 31, 2009, 2008 and 2007


	Balance at Beginning of Period		Additions Charged to Expense		Write-offs, Recoveries and Adjustments		Balance at End of Period
Allowance for doubtful accounts receivable
Year ended December 31, 2007	$	31	$	79	$	28	$	82
Year ended December 31, 2008	$	82	$	201	$	66	$	217
Year ended December 31, 2009	$	217	$	362	$	182	$	397
Valuation allowance for deferred tax assets
Year ended December 31, 2007	$	16,799	$	—	$	3,114	$	13,685
Year ended December 31, 2008	$	13,685	$	17,666	$	—	$	31,351
Year ended December 31, 2009	$	31,351	$	2,175	$	—	$	33,526

102

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

The Information required by this item is incorporated herein by reference to the Current Report on our Form 8-K dated April 30, 2009.

Item 9A.

Controls and Procedures

Evaluation of Disclosure Controls and Procedures. Our management evaluated, with the participation of our Chief Executive Officer and our Chief Financial Officer, the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act of 1934, as amended) as of the end of the period covered by this Annual Report on Form 10-K. Based on this evaluation, our Chief Executive Officer and our Chief Financial Officer have concluded that our disclosure controls and procedures were effective as of December 31, 2009 to ensure that information we are required to disclose in reports that we file or submit under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms, and that such information is accumulated and communicated to management as appropriate to allow for timely decisions regarding required disclosure.

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rule 13a-15(f) and 15d – 15(f) under the Securities Exchange Act of 1934, as amended. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures my deteriorate.

To evaluate the effectiveness of internal control over financial reporting, management used the criteria set forth in Internal Control-Integrated Framework, issue by the Committee of Sponsoring Organizations of the Treadway Commission. Based on its assessment using those criteria, management has concluded that we maintained effective internal control over financial reporting as of December 31, 2009.

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to temporary rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this annual report.

Item 9B.

Other Information

None

103

PART III

Certain information required by Part III is omitted from this Annual Report on Form 10-K because the Company will file a Definitive Proxy Statement with the Securities and Exchange Commission within 120 days after the end of our year ended December 31, 2009.

Item 10.

Directors, Executive Officers of the Registrant and Corporate Governance Matters

The Information required by this item is incorporated herein by reference to the Proxy Statement.

Item 11.

Executive Compensation

The Information required by this item is incorporated herein by reference to the Proxy Statement.

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The Information required by this item is incorporated herein by reference to the Proxy Statement.

Item 13.

Certain Relationships and Related Transactions, and Director Independence

The Information required by this item is incorporated herein by reference to the Proxy Statement.

Item 14.

Principal Accounting Fees and Services

The Information required by this item is incorporated herein by reference to the Proxy Statement.

104

PART IV

Item 15.

Exhibits and Financial Statement Schedules

(a)(1)

The financial statements required by Item 15(a) are filed in Item 8 of this Annual Report on Form 10-K.

(2)

The financial statement schedules required by Item 15(a) are filed in Item 8 of this Annual Report on Form 10-K.

(3)

Exhibits


Exhibit Number		Description
2.1⁴		Agreement and Plan of Merger and Reorganization dated as of July 7, 2008 by and among the Registrant, Relay Acquisition Company, LLC and Reliant Technologies, Inc.
3.2¹		Amended and Restated Certificate of Incorporation of the Registrant as currently in effect.
3.3⁶		Certificate of Ownership and Merger of Solta Medical, Inc. dated as of January 12, 2009.
3.4¹		Bylaws of the Registrant as currently in effect.
4.1¹		Specimen Common Stock certificate of the Registrant.
4.2¹		Amended and Restated Investor Rights Agreement dated March 12, 2002 by and among the Registrant and certain stockholders.
4.3¹²		Form of Registration Rights Agreement dated January 2010 by and among the Registrant and certain stockholders.
10.1¹		Form of Indemnification Agreement for directors and executive officers.
10.2¹		1997 Stock Option Plan.
10.3¹		2006 Equity Incentive Plan.
10.4¹		2006 Employee Stock Purchase Plan.
10.5¹		Sublease Agreement dated September 7, 2004 by and between the Registrant and iAnywhere Solutions, Inc. for office space located at 25881 and 25901 Industrial Boulevard, Hayward, California and exhibits thereto.
10.6¹		Development and Supply Agreement dated October 1, 1997 by and between the Registrant and Stellartech Research Corporation and the amendments thereto.
10.7¹		Service Agreement dated January 14, 2003 by and between the Registrant and Stellartech Research Corporation.
10.8¹		Patent License and Settlement Agreement dated June 3, 2005 by and between the Registrant and Syneron.
10.9¹		Restated and Amended Consulting Agreement dated July 30, 1998 by and between the Registrant and Edward W. Knowlton, M.D. and the amendments thereto.
10.10¹		Restated and Amended Intellectual Property Assignment and License Agreement dated July 30, 1998 by and between the Registrant and Edward W. Knowlton, M.D.
10.11¹		Employment Agreement dated January 7, 2005 by and between the Registrant and Stephen J. Fanning.
10.12¹		Severance Benefit Plan effective as of February 1, 2005.
10.14²		Form of Notice of Grant for, and Terms and Conditions of, Restricted Stock Units under the 2006 Equity Incentive Plan.
10.15²		Form of Notice of Grant for, and Terms and Conditions of, Restricted Stock under the 2006 Equity Incentive Plan.
10.16²		Form of Notice of Grant for, and Terms and Conditions of, Stock Options under the 2006 Equity Incentive Plan.

105


Exhibit Number		Description
10.17³		Employment Agreement dated November 5, 2007 by and between the Registrant and John F. Glenn.
10.24⁵		Form of Change of Control and Severance Agreement for Chief Executive Officer.
10.25⁵		Form of Change of Control and Severance Agreement for Chief Financial Officer and Chief Operating Officer.
10.26⁵		Form of Change of Control and Severance Agreement for Vice Presidents.
10.27⁹		Customer Agreement between the Registrant and Bear Stearns, a division of J.P. Morgan Chase originally dated as of June 5, 2007.
10.28⁷		Loan and Security Agreement, dated as of March 9, 2009, by and between Registrant and Silicon Valley Bank.
10.29⁷		Unconditional Guaranty, dated as of March 9, 2009, by Reliant Technologies, LLC in favor of Silicon Valley Bank.
10.30⁷		Security Agreement, dated as of March 9, 2009, by and between Reliant Technologies LLC and Silicon Valley Bank.
10.31⁸		First Amendment to Loan and Security Agreement between Registrant and Silicon Valley Bank dated March 30, 2009.
10.32¹¹		Second Amendment to Loan and Security Agreement between Registrant and Silicon Valley Bank dated June 30, 2009.
16.1¹⁰		Letter regarding change in certifying accountants.
21.1		List of Subsidiaries.
23.1		Consent of PricewaterhouseCoopers LLP, Independent Registered Public Accounting Firm.
23.2		Consent of Deloitte & Touche LLC, Independent Registered Public Accounting Firm.
24.1		Power of Attorney (see page 107).
31.1		Certification of Chief Executive Officer under Securities Exchange Act Rule 13a-14(a).
31.2		Certification of Chief Financial Officer under Securities Exchange Act Rule 13a-14(a).
32.1		Certifications of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. 1350 and Securities Exchange Act Rule 13a-14(b).

¹	Incorporated by reference from our Registration Statement on Form S-1 (Registration No. 333-136501), which was declared effective on November 9, 2006.

²	Incorporated by reference from our Current Report on Form 8-K dated February 13, 2007.

³	Incorporated by reference from our Current Report on Form 8-K dated January 4, 2008.

⁴	Incorporated by reference from our Current Report on Form 8-K/A dated July 11, 2008.

⁵	Incorporated by reference from our Quarterly Report on Form 10-Q for the quarter ended June 30, 2008.

⁶	Incorporated by reference from our Current Report on Form 8-K dated January 12, 2009.

⁷	Incorporated by reference from our Current Report on Form 8-K dated March 9, 2009.

⁸	Incorporated by reference from our Current Report on Form 8-K dated March 25, 2009.

⁹	Incorporated by reference from our Annual Report on Form 10-K dated March 31, 2009.

¹⁰	Incorporated by reference from our Current Report on Form 8-K dated April 30, 2009.

¹¹	Incorporated by reference from our Current Report on Form 8-K dated June 30, 2009.

¹²	Incorporated by reference from our Current Report on Form 8-K dated January 7, 2010.

106

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this Registration Statement to be signed on its behalf by the undersigned, thereunto duly authorized, in the city of Hayward, State of California, on the 22^nd day of March 2010.


SOLTA MEDICAL, INC.

By:		/s/ STEPHEN J. FANNING
		Stephen J. Fanning President and Chief Executive Officer

POWER OF ATTORNEY

KNOW ALL MEN AND WOMEN BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Stephen J. Fanning and John F. Glenn, his attorney-in-fact, for him or her in any and all capacities, to sign any amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the U.S. Securities and Exchange Commission, hereby ratifying and confirming all that said attorney-in-fact, or his substitute, may do or cause to be done by virtue thereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.


Signature	Title	Date

/s/ STEPHEN J. FANNING Stephen J. Fanning	President, Chief Executive Officer and Director (Principal Executive Officer)	March 22, 2010

/s/ JOHN F. GLENN John F. Glenn	Chief Financial Officer (Principal Accounting Officer)	March 22, 2010

/s/ HAROLD L. COVERT Harold L. Covert	Director	March 22, 2010

/s/ LEONARD DEBENEDICTUS Leonard DeBenedictus	Director	March 22, 2010

/s/ EDWARD W. KNOWLTON, MD Edward W. Knowlton, MD	Director	March 22, 2010

/s/ CATHY L. MCCARTHY Cathy L. McCarthy	Director	March 22, 2010

/s/ MARTI MORFITT Marti Morfitt	Director	March 22, 2010

/s/ MARK M. SIECZKAREK Mark M. Sieczkarek	Director	March 22, 2010

/s/ ERIC B. STANG Eric B. Stang	Director	March 22, 2010

107